What about the paper jam in the inkjet printer?

Question 1: What about the paper jam in the color inkjet printer? See if there are any foreign objects in the paper feed and see if you can take them out with tweezers. If the paper can't enter, it is likely that there is something wrong with the paper feeding part, which is greatly affected by the environment.

Question 2: How to deal with the paper jam in Epson printer? Paper feeding is difficult. This printer feeds paper by friction. If the paper is thick or smooth, it will affect the paper feeding strength of the printer.

First, please make sure that the printing paper is placed correctly, as shown below:

1. The printing paper is smooth without curling or folding;

2. Open the paper clip, pull out the extension, and then slide the paper clip backward to make it tilt;

3. Facing the printer, slide the guide rail from the left side of the paper feeder to the left side;

4. After using the paper feeder: the printable side of the printing paper is loaded along the right guide rail of the paper feeder; Use the bottom tray: the printable side is down, the scale lines are aligned and the printing paper is loaded.

5. Clamp the main printing paper with the sliding guide rail, but not too tightly.

Secondly, please perform the following printer self-check to confirm whether there is hardware failure in the printer:

1. Make sure that the printer and computer are turned off;

2. Unplug the cable from the interface connector of the printer;

3. Put a piece of A4-sized plain paper into the paper feeder in the right way;

4. Press the Stop/Maintenance button first, and then press the Power button to turn on the printer. When the printer is powered on, release both buttons. Usually, the printer feeds paper and prints a self-test page. Please confirm whether the printer feeds paper normally and prints. If the fault still exists

Please contact Epson Authorized Service Center for further testing of the printer. You can visit the following website to see the nearest service center:

Epson /...w.aspx

Tip: It is recommended to use genuine Epson paper, or plain paper and envelopes that meet the following standards. The weight of plain paper is: 75g/m2(20 lbs); The weight of the envelope is: 75g/m2(20 lbs) ~ 90g/m2(24 lbs).

If the above scheme still can't solve your problem, please log in to Epson official website "Online Engineer": 219.232.55.146/portal/epson to communicate with Epson engineers in real time and solve the problem in time. (Epson "Online Engineer" service hours: 08: 30 Monday to Friday-18: 00)

Question 3: What are the causes of paper jam in inkjet printers? The paper jam in the paper feed unit is usually the problem of the paper pick-up wheel. Paper jam in the paper discharge unit is closely related to mechanical failure. Sudden paper jam in printing is usually caused by optical distance sensor.

Question 4: My inkjet printer shows a paper jam! Check carefully whether there is any paper in it first.

Another possibility is that the ink cartridge is not in place. Take out the ink cartridge and put it down again.

Second, the sensor is misplaced.

Question 5: How to deal with the printer paper jam? How to solve the printer paper jam is actually a very common thing for office output devices such as printers. There are two main reasons for printer paper jam. One is the problem of printing paper. The quality of paper directly affects the working state of the printer, and the paper will change according to the office environment. Too wet and too dry paper can cause paper jam problems. There is another situation that may cause the printer to jam, that is, the paper outlet of the printer is too dirty or the paper rubbing parts of the printer are aging. Of course, there are some ways to avoid it. Before the newly packaged printing paper is put into the printer, we can break up the printer by hand and separate the printing paper completely by uniform force, thus removing the static electricity on our paper. When placing paper, smooth the edges of the paper by hand, and clamp both sides of the paper with cardboard. Do not put too much printing paper in the paper feed unit of the printer at one time, and it is best not to expose the printing paper in the office environment all the time, which can effectively avoid the occurrence of paper jam. In order to prevent the printer from jamming, it is also very important to ensure the quality of printing paper. The printing paper with good texture is undoubtedly very suitable. Don't worry too much if there is a paper jam. First, open the lid of the laser printer, take out the toner cartridge, and turn the green switch on the left side of the printer upward to expand the gap of the paper winder. Then gently pull out the stuck paper with both hands. At this time, be careful not to use too much force to avoid breaking the paper. Once the paper is broken, it is difficult to take out the remaining paper, and once the remaining paper in the printer is not taken out, printing here will bring more problems. Don't use sharp things to get it, so as not to damage the laser printer. When the laser printer is jammed, some toner is often scattered in the printer, which makes the printed things black and the documents look dirty. At this time, you only need to print a few more test pages and take out the toner. Too much dust in the paper passage will stain the printing paper. When you are on cleaning paper Road, first open the lid of the laser printer, take out the toner cartridge, and then gently wipe the rollers and Yin He of the paper feeding and discharging unit back and forth with a clean and soft wet cloth to remove paper scraps and dust. Be careful not to use organic solvents for cleaning. By the way, I would like to tell you a solution to the problem that the printer outputs blank pages: For inkjet printers, the failure of printing blank pages is mostly caused by the nozzle clogging and the ink cartridge running out, so to clean the nozzle or replace the ink cartridge, you can follow the following steps to eliminate it: Start → Settings → Printer → Click Printer, right click → Content → Tools, and select the item of cleaning the print head. At this point, the printer will automatically clean the print head, which takes several minutes. When finished, please self-check the printer to see if there is enough ink. If one or more colors in the self-test page can't come out, you need to replace the new ink cartridge. When there is a paper jam in the printer, the first thing to do should be to turn off the power and take out the paper jam. Then analyze what caused this situation to avoid paper jam again. The main reasons are as follows: 1, the surface of printing paper is uneven. Check whether the surface of the printing paper is flat and whether the paper is curled or wrinkled. Solution: Use paper with smooth surface to ensure that there is no attachment on the surface of printing paper. 2. The printing paper is too thin or too thick. Ensure that the quality of printing paper exceeds 60 grams. If the printing paper is too thin, it will make it difficult for the printer to feed paper, and it will get stuck in the machine during the paper feeding process. Too thick paper can also cause paper jams. Generally, printers can only print paper with a paper quality of less than 120g, and too thick paper will jam when feeding. Large copiers and inkjet printers support thick paper printing. Solution: Use paper with proper paper thickness. 3. The paper roller is worn. Pick-up roller is the most easily worn part of laser printer. When the paper in the paper box is normal and it is impossible to take the paper, it is often that the paper taking roller is worn or the spring is loose. Solution: emergency treatment can be carried out by winding rubber bands. After winding the rubber band, the paper friction increases, which can make the paper feed back to normal. Or wipe the paper roll with a wet clean towel to make it clean.

Question 6: How to solve the paper jam problem of HP inkjet printer? The solution is as follows:

1. Clear the paper jam or foreign matter inside the printer.

2. Don't use wet or wrinkled paper.

3. Contact after-sales, and check whether the paper sensor and drum assembly inside the printer are normal. 4, check whether the printer paper quality is normal, if damaged, contact after-sales replacement paper roller.

Easily rent printers, rent them for free and solve problems related to photocopiers.

Question 7: How to choose the paper jam model of Epson printer? If it is inkjet, turn off the power first and then open the cover, and pull out the paper in the direction of the paper. If it is broken, it doesn't matter. Plug in the power supply, turn on the power supply and the paper will come out. If it doesn't come out, it can only be repaired. If you dismantle it yourself, unprofessionalism will magnify the problem.

Question 8: What should I do if the printer paper jam can't be taken out? You can open the back opening. There is an opening on the back of the laser printer. Ink-jet printers can be taken out directly from the front. Look around and see where it's easy to get rid of. Turn off the power first.

Question 9: What should I do if there is a card slot in Canon inkjet printer? The most common fault of printer is paper jam. When this fault occurs, the indicator light on the operation panel will light up and send an alarm signal to the host. Usually, the reasons are that the paper tray is improperly installed, non-standard copy paper is used, and the paper may be too light, too thick or too smooth.

Treatment: One of the most important post-treatment measures of paper jam is to pay attention to pulling out the paper jam along the normal conveying direction of the paper. In addition, just open the cover and remove the paper jam.

If there is frequent paper jam, it is necessary to check the paper feed channel, and the leading edge of the paper is just above the metal plate. The pickup roller is the most easily worn part in laser printing. When the paper in the paper box is normal and it is impossible to take the paper, it is often that the paper taking roller is worn or the spring is loose. There is not enough pressure to feed the paper into the machine. When the paper roll is worn and cannot be replaced for a while, emergency treatment can be carried out by winding rubber bands. After winding the rubber band, the paper friction increases, which can make the paper feed back to normal. Spread out the paper, don't fill the paper box too full, and use manual paper feeding technology when printing thick paper, which can effectively prevent paper jam.

Question 10: Why is the printer of inkjet HP always jammed? In fact, it is not only HP printers that have this problem, but also many printers, especially laser printers. The most common fault is paper jam. When this fault occurs, the indicator light on the operation panel will flash and send an alarm signal to the host. The way to eliminate this fault is simple, just open the cover and take off the paper jam. However, it should be noted that the paper must be taken in the paper feeding direction, and no knob can be turned in the opposite direction. But if there is frequent paper jam, it is necessary to check the paper feed channel. Pick-up wheel is the most easily worn part of laser printing. When the paper in the paper tray is normal, it is often because the paper roller is worn, the paper pressing spring is loose, and the pressure is not enough to feed the paper to the machine. At this time, it is generally necessary to replace the paper roll. In addition, improper installation of paper tray and poor paper quality (too thin, too thick and wet) may also cause paper jam or paper retrieval failure. Another possibility is the problem of fixing film. The fixing film is stuck without moving.