Sika horizon recruitment

Sika floor paint has the characteristics of strong acid and alkali resistance, wear resistance, pressure resistance, impact resistance, mildew resistance, waterproof, dustproof, anti-skid and anti-static, and anti-electromagnetic wave. , bright and diverse colors, easy to clean. Widely used in surface painting of electronic factories, hospitals, aviation, aerospace bases, laboratories, offices, supermarkets, parking lots, etc. Next, follow us to learn about the relevant content!

I. Design requirements

1, Sika epoxy floor paint adopts one-time coating process, no matter how large the area is, there is no seam, and it is also a dust-free material with strong adhesion, wear resistance and strong hardness. It has been accepted and used by many domestic manufacturers and users.

2. Design scheme of epoxy floor: Various schemes can be designed according to different application requirements, such as thin-layer coating, self-leveling coating with the thickness of 1-5mm, anti-slip and wear-resistant coating, pressure mortar coating, water-based breathable coating, anti-mildew and antibacterial coating, anti-static and anti-corrosion coating, etc.

3. Basis for design of epoxy floor: In order to quickly and accurately select suitable epoxy floor materials and make the floor design scheme achieve the best performance, performance, safety and economic performance, we suggest that customers consider the following factors: performance requirements, floor conditions, foundation conditions, aesthetics, safety requirements and other related requirements.

Second, the environmental requirements

1. Environmental protection requirements for epoxy floor construction: a. Moisture content of base surface: non-aqueous epoxy floor cannot be constructed when it is above 6%; B, air humidity: more than 85%, should stop construction; C, construction temperature: below 5℃, special formula should be selected.

2. Maintenance of epoxy floor: Epoxy floor is a high-value, high-quality and demanding product, which needs careful maintenance. Proper use can keep the floor as new and prolong its service life. The measures are as follows: Anyone who enters the workshop needs to change shoes (to avoid entering the workshop with mud and sand and scratching the floor); All hardware must be wrapped in soft plastic or rubber to avoid scratching the ground when using; When dragging the tray, lift the tray completely off the ground, and pay special attention to the corners of the tray not to scratch the ground when turning; When cleaning the floor, you need to use a soft mop or a wet and dry vacuum cleaner, and then clean it with water or detergent, but pay attention to the slippery floor; If it is worn or scratched due to long-term use, it can be repaired in a small area. If the area is large, it is recommended to roll it again or wipe it again. Please use hard or elastic rubber wheels for trolleys and trolleys, and use them separately inside and outside the factory.

The above is Bian Xiao's detailed answer. I wonder if you are satisfied with our introduction.