Job Recruitment Website - Zhaopincom - What types of cabinets have been designed? What should we pay attention to in cabinet design?

What types of cabinets have been designed? What should we pay attention to in cabinet design?

Cabinet design is the top priority of kitchen decoration. Choosing a reasonable cabinet design can make the kitchen have a lot of use space, including the usual use area and storage space. What types of cabinets are there? What should we pay attention to in cabinet design?

First, the design type of cabinets

1, I-cabinet

Choosing a linear cabinet means that the kitchen area is limited, and the cabinet also lacks the flexibility and convenience of enclosure after the corner. As you can imagine, when you operate in the kitchen, you always walk from one end to the other, and there is no room for manoeuvre. Therefore, although this kind of in-line cabinet brings a sense of openness and saves space, it also requires you to make careful arrangements in storage and operation.

2.l-shaped cabinet

In the design layout of L-shaped kitchen cabinets, the working area is 90-degree L-shaped along the wall, which is convenient for continuous operation of each process. For example, the sink, operating table and stove are all L-shaped, thus forming an ideal triangular workspace with a distance of less than one meter. Each process is very smooth and easy to operate. If it is an open kitchen, the short side of the L-shaped cabinet can also be designed as a partition workbench, or directly designed as a small dining table, so that the kitchen can not only prepare meals, but also realize the dining function.

3.u-shaped cabinet

This is a very common cabinet mode abroad, and the kitchen based on it requires high activity area and needs a large area. Because of its powerful function, this kind of cabinet needs to be well controlled in space. The best way is to set up several independent functional spaces: operation desk, storage area, bar and small restaurant. The arrangement of these spaces should take care of certain living habits and consider the functional characteristics of each space. This arrangement will make this U-shaped kitchen look more reasonable and orderly.

Second, what should be paid attention to in cabinet design?

1, when designing cabinets, it is absolutely necessary to keep a distance of 80 mm between the sink and the cooker, and 100 mm is better; Here is the center of the kitchen, fish, meat and vegetables are all ready, and all the cooking utensils and seasonings needed should be placed at your fingertips; From the safety point of view, drawers should not be placed directly around the cooker. Children will pull out drawers, climb high, and it will hurt when they touch hot soup pots.

2, the pool and the stove should be on the same table, not too far away. Generally, the workflow in the kitchen will be washing and then processing, and then cooking. It is best to design the pool and the stove on the same streamline, and the functional area between them is connected by a straight table as the operation desk.

3. Kitchen countertops should be designed with different heights according to different working areas. At present, the operating table in most families is uniform in height, that is, about 80 cm, or slightly adjusted according to the height of the main operator. But for every job in the kitchen, not this height is very comfortable. However, some countertops are better positioned lower. If users like making cakes very much, the height of 10 cm can be lowered in the common console for making cakes. However, in the design of cabinets, we can't pursue excessive changes in height, especially in smaller kitchens, which will affect the overall beauty.

There are three main design types of cabinets: linear, L-shaped and U-shaped. You can choose a suitable design according to your kitchen space. When designing cabinets, pay attention to the distance between the sink and the stove, and be convenient to use. Safety should also be considered. Cooking utensils should not be put out of the reach of children. In addition, the height of the desktop should be changed according to the use function. If the height of the whole desktop is consistent, it will cause inconvenience in some uses.