Job Recruitment Website - Zhaopincom - How much is the real stone paint contractor's material per square meter?

How much is the real stone paint contractor's material per square meter?

As of June 5438+ 10, 2020, leveling in construction generally requires about 3~4KG of real stone paint, and the contract price is 70~ 100 yuan/leveling. According to different brands, real stone paint is about 10-20 yuan per liter. Generally, 5L can brush 40 square meters. You can calculate the specific cost according to the area of your room.

The market will also change according to different factors, such as the size of the area, the size of the area, the decoration company, and the regions that affect the price factors. The specific price still depends on the real situation.

Extended data:

The coating of real stone paint is so hard when it dries that nails can't be scraped. If ordinary real stone paint can still be scratched by nails after three days of construction under good weather conditions, it should be considered that the coating is too soft, mainly because the emulsion selected is not suitable.

When preparing real stone paint, builders use the same emulsion as latex paint, which leads to low emulsion content in the formula of real stone paint, and the coating is not compact enough due to the existence of a large number of sand and gravel during film formation. According to the research of coating researchers, the adhesive strength of emulsion used to prepare real stone paint is not less than 3MPa, and the minimum film forming temperature is not less than 15℃.

The higher minimum film-forming temperature may cause the disadvantage that the film is not easy to form at low temperature, which can be solved by adding more film-forming additives appropriately. Film-forming additives can be completely volatilized after the coating is dried, and generally will not affect the performance of the coating. The composite emulsion with high adhesion and high minimum film forming temperature is selected for real stone paint, which fundamentally solves the problem that the coating is too soft.