How to debug Foshan Songchuan Tongluo sintering packaging machine

Debugging steps of Foshan Songchuan Tongluo combustion packaging machine:

1. Press the switch button of the cabinet. After the switch is locked on the switch box, open the cabinet door, drill out the compressed air pipe from the lower hole at the back, then insert it into the air pressure regulating valve at the back of the cabinet door and fix it with a pipe clamp.

2. Close the chassis, turn on the air switch, and input compressed air, and the mechanical pressure plate will automatically fold. According to the size of the package, the thickness of the plastic sheet and the actual packaging situation, rotate the handwheel of the air pressure control valve to adjust the air pressure to the appropriate pressure. The greater the pressure, the faster the platen presses and the greater the pressure, so it is more appropriate to adjust the magazine with atmospheric pressure.

3. Insert the machine power cord plug into the 220V AC power socket, connect the machine line bus, and connect the whole machine circuit.

4. The Chinese fir mold is placed on the mold, and the wire of the Chinese fir mold is connected with the terminal of the Chinese fir mold centered on the mechanical team.

5. Turn on the cooling switch, turn on the cooling time circuit, adjust the cooling time setting, and select the cooling time of the platen.

6. Push the die frame to rotate counterclockwise to ensure the normal automatic pressurization of the pressure plate. If there is no inspection, you can objectively put the plastic parts and line cards on the bakelite mold and start the trial package.

7. Turn on the heating switch, connect the heating timing circuit, adjust the heating time, set the twisting time, and select the appropriate bakelite mold heating seat for electric heating according to the actual packaging situation.