HP Star14-CE2017TX How to Install win 10 System

What are the steps to install WIN 14-CE20 17TX system? Hewlett-Packard Star 14-CE20 17TX is a lightweight notebook, 14 inch, pre-installed with Windows 10, weighing 1.59Kg, 326.8mm long and 225.5mm wide, and its processor is Intel Core i58. Quad-core/eight-thread, memory capacity is 8GB(8GB×6544 is equipped with NVIDIAGeforceMX250 performance-level discrete graphics card, memory capacity is 2GBGDDR5. Here, Bian Xiao will share with you the graphic steps of reinstalling win 10 system with USB flash drive for HP Star 14-CE20 17TX.

I. Preparatory work

1.8g or larger empty USB flash drive.

2. Making a pe boot disk: How to make a USB boot disk with a micro pe toolbox (UEFILegacy dual mode).

3. win 10 system download: ghostwin 1064-bit professional cracked version v20 19.07.

2. HP Star 14-CE20 17TX notebook USB flash drive reinstallation win 10 system is as follows.

1. After making the wepe startup disk, copy the iso image of win 10 system directly to the USB flash drive;

2. Insert the pe boot disk into the HP Star 14-CE20 17TX notebook computer, press F9 to start the shortcut key after restarting, bring up the startup menu dialog box, select the recognized U disk option, generally the U disk name or USB, and press enter to enter;

3. Select the resolution of windowspe. By default, the 1 th resolution is selected, or you can select the second specified resolution and press Enter.

4. After entering pe, double-click the partition assistant on the desktop (lossless), select disk 1, and click Quick Partition. If there are multiple hard disks, choose the right one and don't delete it by mistake.

5. Set the number, size and type of partitions for HP star14-CE2017tx. It is recommended that the volume label of the system disk be above 50G. Since UEFI startup is selected, the disk type should be GPT, and the partition alignment should be 4k, with 2048 sectors, or 4096 sectors can be selected. Click start execution after confirmation.

6. The zoning process is very fast. As shown in the figure, after the partition is completed, there will be two ESP and MSR in the GPT partition. Don't move these two partitions, just look at the C disk and D disk you separated. If the drive letter is occupied, select the disk that has occupied drive C, choose to change the drive letter on the left, and so on. It is ok not to change, and the position of the system disk can be judged according to the label system.

7. Then open the this pc-Micro PE toolbox, right-click the iso image of win 10 system, and select Load. If there is no loading option, right-click to open Method-Resource Manager;

8. Double-click and double-click the installation system. Exe, run the installation tool, select the recovery partition, and the GHOWIMISO image path will be automatically extracted to win 10.gho, and then select the installation location, usually drive C, or judge according to the volume label or total size. After selection, click OK;

9. If this prompt pops up, don't worry, click Yes to continue;

10. This dialog box pops up. Choose to restart and guide the repair after completion, and click Yes;

1 1. It will take some time to go to this interface and perform the installation and deployment of win 10 system to drive C;

12. After the operation is completed, the HP Star 14-CE20 17TX laptop will automatically restart after 10 second;

13. Pull out the USB flash drive during the restart process, and then enter this interface to install, drive and activate the components of win 10 system;

14, it will take some time to restart the system automatic configuration process again;

15. Finally, boot into the desktop of win 10 system, and HP Star 14-CE20 17TX notebook will reinstall win 10 system.

The above is the method of reinstalling Win 14-CE20 17TX notebook computer. Users who can't reinstall win 10 system can learn this tutorial.