How to use the car air pump? What are the steps to use?

Ensure the power supply of the inflator before use. If it is too big, you need to use a battery clip. Then use the tire pressure monitor or the monitoring system of the car to measure the tire pressure to see if it needs to be inflated or deflated. At this point, the preparatory work has been completed. Insert the air outlet of the air pump directly into the tire valve, and lock the air pump lock when the tire leaks. Finally, put the switch of the air pump in the open position to inflate, so if it is necessary to deflate, just press the pressure release button. It should be noted that the operation can be stopped as long as the inflation/deflation reaches the specified tire pressure value. Tire pressure values can be found in the car owner's manual, the fuel tank cover and the marks on the tires. In addition, when using the pump to inflate, if it has been used for more than 5 minutes, be sure to stop using it and let it dissipate heat, so as not to affect its service life due to overheating of the pump.

Fengjinba's tire pump is oil-free and maintenance-free. Anode aluminum alloy cylinder is beneficial to good heat dissipation of the machine. The usage is as follows: Before operating the pump, check and start the automobile engine. Then take out the power connector of the pump and connect it to the cigarette lighter of the car. Here we should pay attention to know the power supply pressure of the pump in advance. If the voltage is too high, please use the battery clip. Insert the valve at the top of the inflator trachea directly into the tire valve. When the tire leaks, continue to choose the copper connector until it locks, indicating that the air has been circulated. Press the start switch on the inflator by hand to start inflation. Read the correct pressure value of the pressure gauge. When the pressure exceeds the normal pressure, the general tire pressure is 1.97-2.46kg/cm2. Please press the decompression button to release the pressure. When the pressure value is lower than the normal pressure, turn the pump switch to the ON position and start charging.

In order to prevent the vehicle from leaking due to accidental tire damage during use, all vehicle companies basically equip vehicles with spare tires for replacement. However, because the replacement of the spare tire is complicated and manual work, if a delicate girl faces this situation, she is definitely at a loss. At this time, a car air pump can solve this problem perfectly. When the vehicle tire leaks, the vehicle inflator can use the 12V interface of the cigarette lighter as the power supply to inflate the tire, which is very convenient. So, if you are a girl, or don't want to change a spare tire, buy one and put it in the car.

The vehicle-mounted air pump can obtain electric energy in two ways, namely through the 12V cigarette lighter interface and through the battery. Unscrew the tire valve cover and connect the inflator tube to it. After the inflator is electrified successfully and connected with the gas nozzle, the inflation pressure can be set on the setting panel. The label of air pressure standard is usually attached to the B-pillar area of the vehicle or the inside of the fuel tank cover. When everything is ready, press the inflation start button. At this time, the air pump began to work to inflate the vehicle tires.