Job Recruitment Website - Zhaopincom - Brief introduction of production line of Guangdong Leimeng heavy machinery group

Brief introduction of production line of Guangdong Leimeng heavy machinery group

Stone production line is mainly composed of vibrating feeder, jaw crusher, impact crusher, vibrating screen, belt conveyor, centralized electrical control and other equipment. The designed output is generally 50-800 t/h. In order to meet the different processing needs of customers, cone crusher and dust removal equipment can be configured.

Raymond is a stone production line manufacturer, which can tailor the production line equipment for customers to meet different needs.

Stone production line technology

The big stones are sent to the jaw crusher by the vibrating feeder through the silo for coarse crushing, and the coarse crushed stones are sent to the impact crusher by the belt conveyor for further crushing. Stones from fine crusher were sent to a vibrating screen for screening, and several stones with different specifications were screened out. The stone that meets the requirements of particles is sent to the finished product pile by the finished product belt conveyor, and the stone that does not meet the requirements of particles is sent back to the impact crusher by the belt conveyor to be crushed again, forming a closed cycle. The granularity of finished products can be combined and combined according to the needs of users.

Stone process flow chart is shown on the right.

Advantages of stone production line

1. The invention has high degree of automation, high crushing ratio, high production efficiency and large handling capacity. The crushed product is cubic, with low needle content, no internal cracks and high pressure.

2. The equipment maintenance is simple, and the wearing parts are made of the latest high-strength and wear-resistant materials in China, with small loss and long service life, which can bring considerable economic benefits to customers.

3. The stone crushing production line has been successfully applied to the crushing of limestone, basalt, granite, pebbles and other stones, and the quality of the crushed finished products has completely reached the GB 14685-200 1 standard, providing qualified aggregates for highway, railway, water conservancy, concrete mixing station and other industries. Production capacity: 50-800 tons/hour

Components: vibrating feeder, jaw crusher, impact crusher, vibrating screen, belt conveyor, centralized electric control and other equipment.

Application scope: mining and stone crushing production.

Production line introduction: The stone crushing production line is mainly composed of vibrating feeder, jaw crusher, impact crusher, vibrating screen, belt conveyor, centralized electrical control and other equipment. The designed output is generally 50-800 t/h. In order to meet the different processing needs of customers, cone crusher and dust removal equipment can be configured. Production technology: the stone is evenly sent to the jaw crusher by the vibrating feeder for coarse crushing, and the coarse crushed material is sent to the fine jaw crusher for secondary crushing.

Components: vibrating feeder, jaw crusher, straight-through impact crusher (sand maker), vibrating screen, sand washer, belt conveyor, centralized electronic control and other equipment.

Technical advantage: Lei Meng has designed a complete sand production line, which is in the leading position in the industry.

Production line introduction: Sand production line is usually composed of vibrating feeder, jaw crusher, straight-through impact crusher (sand making machine), vibrating screen, sand washer, belt conveyor, centralized electronic control and other equipment. The designed output is generally 50-500t/h. After several years of development and research, Raymond has designed a complete sand production line by matching the straight-through impact crusher (sand making machine) with other series products with international advanced level. Production capacity: 10-280 tons/hour

Process characteristics: The new mineral processing production line consists of jaw crusher, ball mill, classifier, magnetic separator, thickener and dryer.

Uses: Suitable for wet magnetic separation of magnetite, pyrrhotite, roasted ore, ilmenite and other materials with particle size below 3 mm.

Production line introduction: The newly-built mineral processing production line consists of jaw crusher, ball mill, classifier, magnetic separator, thickener and dryer. The production capacity is 0. 18-7 (m3/min).

Components: jaw crusher, ball mill, classifier, mixing barrel, flotation machine, thickener and dryer.

Technical advantages: The production line has the advantages of high efficiency, low consumption, large Qualcomm and reasonable economy.

Production line introduction: The mineral processing production line consists of jaw crusher, ball mill, classifier, mixing barrel, flotation machine, thickener and dryer, which can be combined with ore feeder, hoist and belt conveyor to form a complete mineral processing production line. The production line has the advantages of high efficiency, low consumption, Qualcomm capacity and economy. Components: jaw crusher, bucket elevator, electromagnetic vibration feeder, transmission device and main engine.

Process characteristics: The block materials are crushed to the required granularity by jaw crusher, and then sent to the silo by hoist.

Uses: It can be used for feldspar, calcite, talc, barite, fluorite, rare earth, marble, ceramics, bauxite, manganese ore and phosphate rock.

Introduction of production line: The grinding equipment is mainly suitable for grinding non-flammable and explosive mineral materials with Mohs hardness below 9 and humidity below 6% in building materials, chemicals, fertilizers, metallurgy, mines, refractories, ceramics, steel, thermal power and coal industries. The fineness of the finished product can be adjusted arbitrarily between 30 meshes and 400 meshes. For example, cement (raw clinker), timely, feldspar, calcite, gypsum, limestone, dolomite, graphite, fluorite, wollastonite, phosphate rock, calcium magnesium phosphate, urea, electrolytic manganese metal, ferromanganese alloy, coal, coal gangue, slag, zircon sand, talc, granite, potash feldspar, marble, barite, ceramics, glass, etc. Production capacity: 25- 195 tons/hour

Feed particle size: ≤ 25mm

Process characteristics: the new cement grinding station adopts pre-crushing technology, which reduces the particle size of grinding materials on the one hand.

Introduction of production line: Introduction of new cement grinding station: The new cement grinding station adopts pre-crushing technology, which on the one hand reduces the particle size of grinding materials, and on the other hand promotes the cracks and defects inside the material particles, thus greatly improving the cement grinding output and reducing energy consumption. The new technology of cement grinding includes: mixing and grinding, cement batching station, pre-grinding, high-fine powder grinding, fine powder separation, dust treatment, automatic control and other technologies, which make cement high-yield, high-quality and energy-saving, and meet the requirements of national energy conservation and emission reduction. Production capacity: 150-600 tons/day

Specification of lime kiln: φ 2.5× 40 ~ φ 4.8x68

Components: vibrating feeder, chain bucket conveyor, bucket elevator and belt conveyor.

Introduction of production line: Introduction of active lime production line: Qualified limestone is stored in silo, lifted by hoist and transported to the silo at the top of preheater. The feed rate is controlled by the upper and lower level gauges, and then the limestone is evenly distributed to each chamber of the preheater through the discharge pipe. Limestone is heated to about 900℃ by kiln flue gas at 1 150℃ in the preheater, and about 30% is decomposed. The limestone is pushed into the rotary kiln by a hydraulic push rod, and sintered and decomposed into CaO and CO2 in the rotary kiln. The decomposed materials enter the cooler, which is cooled to below 100℃ by the blown cold air and discharged. The lime coming out of the cooler is sent to the finished lime bin by vibrating feeder, chain bucket conveyor, bucket elevator and belt conveyor. Production capacity: 800,000-300,000 tons/year

Process characteristics: slag drying → extruder → disperser → classifier (fine powder) → high fine grinding → finished product.

Components: high-efficiency energy-saving dryer, coal-saving high-temperature boiling furnace, anti-condensation high-temperature glass fiber bag dust collector. ...

Production line introduction: Slag micropowder production line introduction: Slag micropowder is ultrafine powder obtained by crushing, drying and grinding blast furnace slag as raw material. Its composition is close to cement and its activity is super high. It is a high-quality additive for cement concrete, a new green building material and a project encouraged by the government. Production capacity: 200 tons/day-8,000 tons/day

Process characteristics: raw meal crushing, raw meal pre-homogenization, raw meal batching, raw meal energy-saving grinding, raw meal homogenization, suspension preheater and calciner, new cooler, cement batching and grinding.

Technical advantages: cement production is efficient, high-quality, energy-saving, and resources are fully utilized, which meets the requirements of environmental protection and sustainable development.

Introduction of production line: Introduction of new dry-process cement production line: The new dry-process cement production line is a modern cement production mode based on raw material pre-homogenization technology and rotary kiln calcination technology, with suspension preheating and decomposition outside the kiln as the core. The process has the characteristics of large production capacity, high degree of automation, high product quality, low energy consumption, less discharge of harmful substances and large utilization of industrial waste.