How to repair the broken skin?

Wash it with leather cleaner first, and let it dry by itself or air-dry with a fan.

Take a piece of leather or non-woven fabric with the same softness as the hole skin, stick it on the bottom of the hole with ordinary glue (such as universal glue), and then fill the hole with repair paste; It takes two or three times to fill the hole, and it takes about half an hour to dry each time. After filling it out, the lines on it are the same as those on it.

2. Repair method of damaged skin without peeling

Clean it with leather cleaner first, and let it dry by itself or blow dry with a hair dryer. Take a piece of leather or non-woven fabric with the same softness as the damaged leather, stick it on the damaged bottom with common glue (such as universal glue), and then fill the damage with repair paste. Fill in the damage only once, without sewing.

3, the repair method of cigarette burning through

First, remove the hard lumps around the scalded skin with a knife, then clean it with leather cleaner, let it dry by itself or blow dry with a hair dryer, take a piece of leather or non-woven fabric with the same softness as the scalded skin, stick it on the bottom of the scalded skin with ordinary glue (such as universal glue), and then fill the scalded skin with repair cream; It takes two or three times to fill the hole, and it takes about half an hour to dry each time. After filling it out, the lines on it are the same as above.

You need to paint it in order to fill the damage. Use repair pigments (eight colors) to match the color of leather. You can refer to the color matching order provided by us when matching colors. When matching colors similar to leather, you can experiment in an inconspicuous place on the sofa, and slowly add colors according to the required colors until the matching is consistent.

After color matching, it can be sprayed by hand with a spray gun or a clean cloth. When spraying, the coating should not be too thick at one time, and it can be sprayed several times. Each spray will be air-dried in the air duct for two minutes, and then the next layer will be applied until it is the same color as the leather. Finally, it will be cared with leather protectant.