How to install a water pump without a faucet

The steps for installing the water pump without faucet are as follows:

1. Determine the water source: First, determine the location and depth of the water source. Groundwater or well water can be obtained by exploring wells or drilling wells.

2. Install the suction pipe: put the suction pipe into the water source, make it reach the bottom and fix it.

3. Connect the water outlet pipe: connect the water outlet pipe to the water outlet of the water pump.

4. Turn on the power: Turn on the power of the pump, follow the instructions and start the pump.

5. Exhaust: After the water pump is started, it is necessary to exhaust the air in the suction pipe in order to accelerate the suction of water.

6. Check the water flow: After the water pump is started, it is necessary to check whether there is water flowing out of the outlet pipe. If there is no water flowing out, it means that the suction pipe is not placed correctly or the water pump is not started.