What details should be paid attention to in the process of garment cutting?

1, the cutting edge should be sharp and clean, otherwise it will easily cause the fabric to slip or fluff at the cutting edge, which will increase the cutting difficulty and affect the cutting speed and accuracy. Note: scissors for cloth cutting should be separated from scissors for paper cutting. ?

2. The cutting table should be kept level. It is best to spread a cotton blanket or thick cloth on the desktop to increase the friction between the fabric and the desktop, increase the stability of the fabric and facilitate the operation. ?

3. When cutting, the left and right hands should cooperate with each other. When entering the knife, the left hand presses the cloth surface and the right hand holds the knife forward. The left hand gesture should keep up with the progress of the right hand in time to avoid the sliding of the upper and lower layers of materials, which will cause great errors due to the displacement of the upper and lower layers of symmetrical plates.

For beginners, when cutting smooth fabrics, especially light chemical fiber fabrics in summer, you can first spread a thick cotton blanket on the table top and then fold it in half with a pin. Straight fabrics are fixed on the table with cotton blankets before cutting, which reduces the difficulty of cutting. ?

4. Cutting should be carried out in strict accordance with ink lines, and the cutting path should be straight. When cutting straight lines, the scissors mouth should be wide, with the center of the blade and more feeds. When cutting curves with large curvature, such as the front and rear bends of trousers and the front and rear armholes of clothes, the opening of scissors should be small. Try to cut with the front end of the blade, but at a fast speed, and at the same time ensure the roundness of the blade.

Extended data:

Precautions before cutting

(a) before cutting, check the size and style, and pay attention to record the body characteristics and other requirements. ?

(2) Check whether there is oil stain, water stain, yarn jumping and uneven color. In terms of material, and avoid it as much as possible when cutting. ?

(3) Generally, there are positive and negative fabrics, which should be carefully distinguished. When cutting, the reverse side of the material should be coated with pigment powder, and light-colored pigment powder should be selected. ?

(4) Some materials, such as cashmere and corduroy, have the characteristics of downstream and vertical flow. When cutting, the up and down directions must be aligned and cannot be reversed, otherwise there will be problems of different shades and colors. For fabrics with patterns, we should pay attention to the difference in the reverse order of patterns. Plaid fabric, pay attention to the relative space and symmetry. ?

(5) When cutting, the main part should be cut first, and then the auxiliary part should be cut. First cut the front and back panels, then cut the sleeves, small sleeve, collar, and finally cut the parts. But when painting and cutting, we must take care of the parts to avoid insufficient materials. ?

(6) When cutting, draw lines horizontally and vertically, pay attention to the warp and weft (vertical and horizontal) directions of clothes, and don't use them obliquely. Generally, clothes are made of warp yarns (vertical yarns), and the collar surface is made of weft yarns. ?