What's the difference between the green book and the red book?

1, what is the vocational qualification certificate system?

The Decision of the Central Committee of the State Council on Deepening Education Reform and Promoting Quality Education in an All-round Way points out that "the system of paying equal attention to academic qualifications and vocational qualification certificates shall be implemented in the whole society". The vocational qualification certificate system is an important part of the employment system and a special form of the national examination system. It refers to the objective, fair, scientific and standardized evaluation and appraisal of workers' skill level or vocational qualification through an appraisal institution recognized by the government in accordance with the vocational skill standards or qualification conditions formulated by the state, and the corresponding national vocational qualification certificates are issued to those who pass the examination.

2, the national vocational qualification certificate is divided into several levels?

The national vocational qualification certificate is divided into five grades, namely, primary (national vocational qualification level 5), intermediate (national vocational qualification level 4), advanced (national vocational qualification level 3), technician (national vocational qualification level 2) and senior technician (national vocational qualification level 1).

3. What are the purposes of the national vocational qualification certificate?

Vocational qualification certificate is the qualification certificate for workers to apply for jobs, take up posts and start businesses. It is the main basis for employers to recruit workers, and it is also an effective certificate for notarizing the skill level of overseas employment and foreign labor cooperation personnel.

8. What is the treatment after obtaining the vocational qualification certificate?

According to Article 23 of Chapter V of the Trial Measures for Implementing the Vocational Qualification Certificate System for Skilled Workers in Guangzhou (Sui Laoji [1998] No.33) issued by Guangzhou Municipal Labor and Social Security Bureau, if employees fail to participate in training and appraisal (assessment) without justifiable reasons, according to the Notice of the former Ministry of Labor and the State Economic and Trade Commission on Printing and Distributing the Training Provisions for Enterprise Employees (labor development [laborers are not competent for the job and have been trained, The employing unit shall encourage workers to actively learn technology, improve their skills, and implement a system in which vocational skills are closely linked to wages and benefits.

All employers should take taking part in and obtaining professional qualification certificates as a necessary condition for workers to take up their posts and an important basis for promoting their wages and determining other benefits. Senior technicians, technicians, senior technicians and intermediate technicians employed in corresponding technical posts can enjoy the same wages and insurance benefits as senior engineers, engineers, assistant engineers and technicians of their own units.

Twenty-fourth the employer may, according to the needs of production and business activities or work, regularly conduct technical business assessment for skilled workers at the same level. Those who fail the exam are allowed to make up the exam, and those who still fail to make up the exam should adjust their jobs.

Twenty-fifth when the quality certification or rating of the employing unit, it should also check the implementation of the professional qualification certificate system for technical jobs. Only enterprises with all employees certified and accepted by the competent authorities are eligible to participate in advanced enterprise selection, enterprise promotion and ISO9000 certification; Only enterprise managers are qualified to select advanced, promote wages, promote positions and cash contract bonuses; Only business operators who implement the annual salary system can receive full annual salary.

(1) Occupation (type of work) for technician assessment

Turner, fitter, welder, gas welder, automobile maintenance worker, automobile maintenance electrician, automobile passenger dispatcher, automobile air conditioner assembly and adjustment worker, automobile maintenance inspector, automobile maintenance sheet metal worker, maintenance electrician, automobile guide driver, motorcycle maintenance worker, elevator installation maintenance worker, refrigeration equipment maintenance worker, clothing design customization worker, clothing cutting worker, glasses optometrist, leather shoes designer, Chinese food chef, Chinese pastry chef. Barbers, hairdressers, masseurs, restaurant waiters, chemical maintenance electricians, chemical instrument repairmen, chemical maintenance welders, chemical maintenance fitters, chemical general controllers, inorganic reactors, organic synthesizers, analysts, commodity salesmen, photographers, mold workers, CNC lathe workers, CNC milling machine operators, machining center operators and flower arranging workers.

(2) Occupation (type of work) assessed by senior technician

Turner, fitter, maintenance electrician, auto mechanic, Chinese chef, Chinese pastry chef, western chef, western pastry chef, restaurant waiter, welder, optometrist, beautician, barber, refrigeration equipment repairman.

(A) technicians to enter oneself for an examination conditions

Has obtained the "senior vocational qualification certificate" of this occupation (type of work) and meets one of the following conditions, you can declare the professional qualification appraisal of technicians:

1, high school education or below, continuous length of service in this occupation (type of work) 10 years or accumulated length of service 15 years or above;

2, secondary vocational and technical schools (technical schools, technical secondary schools or vocational schools), engaged in this type of work for more than 5 years after graduation;

3. Have a college degree or above in the corresponding major and have been engaged in this major for more than 4 years;

4, with the professional assistant engineer degree or above, the professional service for more than 3 years;

5 with secondary vocational and technical schools (technical schools, vocational schools, secondary schools) professional assistant lecturer, intermediate practice instructor or above, engaged in this professional work for more than 3 years.

(2) Conditions for senior technicians to apply for the exam

Meet one of the following conditions, you can declare the professional qualification of senior technician:

1, having obtained the professional qualification of technician for more than 3 years;

2. Those who have obtained a master's degree in the same major, worked in this major for more than 3 years, and obtained the "Advanced Vocational Qualification Certificate" of the corresponding occupation (type of work);

3. Have obtained the qualification of technician for 2 years, and have the same or similar senior title as the declared major.

4. Those who have obtained the qualification of technician for 2 years and have worked in this major (type of work) for more than 20 years.

(3) The length of service of reporting technicians and senior technicians shall be counted from the deadline to the registration time. 1, what is the vocational qualification certificate system?

The Decision of the Central Committee of the State Council on Deepening Education Reform and Promoting Quality Education in an All-round Way points out that "the system of paying equal attention to academic qualifications and vocational qualification certificates shall be implemented in the whole society". The vocational qualification certificate system is an important part of the employment system and a special form of the national examination system. It refers to the objective, fair, scientific and standardized evaluation and appraisal of workers' skill level or vocational qualification through an appraisal institution recognized by the government in accordance with the vocational skill standards or qualification conditions formulated by the state, and the corresponding national vocational qualification certificates are issued to those who pass the examination.

2, the national vocational qualification certificate is divided into several levels?

The national vocational qualification certificate is divided into five grades, namely, primary (national vocational qualification level 5), intermediate (national vocational qualification level 4), advanced (national vocational qualification level 3), technician (national vocational qualification level 2) and senior technician (national vocational qualification level 1).

3. What are the purposes of the national vocational qualification certificate?

Vocational qualification certificate is the qualification certificate for workers to apply for jobs, take up posts and start businesses. It is the main basis for employers to recruit workers, and it is also an effective certificate for notarizing the skill level of overseas employment and foreign labor cooperation personnel.

8. What is the treatment after obtaining the vocational qualification certificate?

According to Article 23 of Chapter V of the Trial Measures for Implementing the Vocational Qualification Certificate System for Skilled Workers in Guangzhou (Sui Laoji [1998] No.33) issued by Guangzhou Municipal Labor and Social Security Bureau, if employees fail to participate in training and appraisal (assessment) without justifiable reasons, according to the Notice of the former Ministry of Labor and the State Economic and Trade Commission on Printing and Distributing the Training Provisions for Enterprise Employees (labor development [laborers are not competent for the job and have been trained, The employing unit shall encourage workers to actively learn technology, improve their skills, and implement a system in which vocational skills are closely linked with wages and benefits.

All employers should take taking part in and obtaining professional qualification certificates as a necessary condition for workers to take up their posts and an important basis for promoting their wages and determining other benefits. Senior technicians, technicians, senior technicians and intermediate technicians employed in corresponding technical posts can enjoy the same wages and insurance benefits as senior engineers, engineers, assistant engineers and technicians of their own units.

Twenty-fourth the employer may, according to the needs of production and business activities or work, regularly conduct technical business assessment for skilled workers at the same level. Those who fail the exam are allowed to make up the exam, and those who still fail to make up the exam should adjust their jobs.

Twenty-fifth when the quality certification or rating of the employing unit, it should also check the implementation of the professional qualification certificate system for technical jobs. Only enterprises with all employees certified and accepted by the competent authorities are eligible to participate in advanced enterprise selection, enterprise promotion and ISO9000 certification; Only enterprise managers are qualified to select advanced, promote wages, promote positions and cash contract bonuses; Only business operators who implement the annual salary system can receive full annual salary.

(1) Occupation (type of work) for technician assessment

Turner, fitter, welder, gas welder, automobile maintenance worker, automobile maintenance electrician, automobile passenger dispatcher, automobile air conditioner assembly and adjustment worker, automobile maintenance inspector, automobile maintenance sheet metal worker, maintenance electrician, automobile guide driver, motorcycle maintenance worker, elevator installation maintenance worker, refrigeration equipment maintenance worker, clothing design customization worker, clothing cutting worker, glasses optometrist, leather shoes designer, Chinese food chef, Chinese pastry chef. Barbers, hairdressers, masseurs, restaurant waiters, chemical maintenance electricians, chemical instrument repairmen, chemical maintenance welders, chemical maintenance fitters, chemical general controllers, inorganic reactors, organic synthesizers, analysts, commodity salesmen, photographers, mold workers, CNC lathe workers, CNC milling machine operators, machining center operators and flower arranging workers.

(2) Occupation (type of work) assessed by senior technician

Turner, fitter, maintenance electrician, auto mechanic, Chinese chef, Chinese pastry chef, western chef, western pastry chef, restaurant waiter, welder, optometrist, beautician, barber, refrigeration equipment repairman.

(A) technicians to enter oneself for an examination conditions

Has obtained the "senior vocational qualification certificate" of this occupation (type of work) and meets one of the following conditions, you can declare the professional qualification appraisal of technicians:

1, high school education or below, continuous length of service in this occupation (type of work) 10 years or accumulated length of service 15 years or above;

2, secondary vocational and technical schools (technical schools, technical secondary schools or vocational schools), engaged in this type of work for more than 5 years after graduation;

3. Have a college degree or above in the corresponding major and have been engaged in this major for more than 4 years;

4, with the professional assistant engineer degree or above, the professional service for more than 3 years;

5 with secondary vocational and technical schools (technical schools, vocational schools, secondary schools) professional assistant lecturer, intermediate practice instructor or above, engaged in this professional work for more than 3 years.

(2) Conditions for senior technicians to apply for the exam

Meet one of the following conditions, you can declare the professional qualification of senior technician:

1, having obtained the professional qualification of technician for more than 3 years;

2. Those who have obtained a master's degree in the same major, worked in this major for more than 3 years, and obtained the "Advanced Vocational Qualification Certificate" of the corresponding occupation (type of work);

3. Have obtained the qualification of technician for 2 years, and have the same or similar senior title as the declared major.

4. Those who have obtained the qualification of technician for 2 years and have worked in this major (type of work) for more than 20 years.

(3) The length of service of reporting technicians and senior technicians shall be counted from the deadline to the registration time.