How are gloves with five fingers cut?

The steps of making gloves are as follows:

1. Prepare a piece of cloth, spread the cloth flat, lay the palm flat on the cloth, draw the shape of the palm, and remember to leave a gap of 3 cm. Cut the thumb separately.

2. Overlap two pieces of cloth together, put a single piece of cloth of thumb and wrist together, and sew them together along the edge.

3. Sew a single piece of thumb cloth to the thumb.

4. After sewing the thumb, sew up the rest.

5. Turn the gloves out to the front and close the wrist.

6. finished products.

Extended information

Precautions for use

Attention should be paid in the process of using gloves

1. The gloves should be appropriate in size. If the gloves are too tight, the blood circulation will be restricted, which will easily lead to fatigue and discomfort; If it is too loose, it is inflexible and easy to fall off.

2. The gloves selected should have sufficient protective function. In the environment where steel wire anti-cutting gloves are selected, synthetic yarn anti-cutting gloves cannot be selected. To ensure its protective function, gloves must be replaced regularly. If the service life is exceeded, it may cause injury to hands or skin.

3. Pay attention to safety during use, and don't throw contaminated gloves at will to avoid causing harm to others. Gloves that are not used for the time being should be put in a safe place.

4. You must pay attention to the correct method when picking gloves, so as to prevent the harmful substances contaminated on gloves from touching the skin and clothes and causing secondary pollution.