What harm does the cable factory have to the health? I'm in the cable

What harm does the cable factory have to the health? Did I give you anything about labor insurance in the cable factory? If I don't give you anything, it means that what you do is harmless.

Is working in an optical cable factory harmful to your health? The work of the cable factory is still very safe, as long as you follow the company's safety operation procedures.

I have worked in the cable factory for more than ten years and I am in good health.

What kind of work in cable factory is harmful to people's health? In the cable forming workshop, it is harmful to health, because the components of the sheath are made of PVC material, which will contain benzene. Long-term exposure to benzene and its homologues is harmful to health.

If there is no protection, long-term contact will lead to lead poisoning, long-term contact with acid/alkali cleaning will cause damage to the contact panel, high temperature will cause burns, plastic materials will volatilize some organic substances when heated at high temperature, and so on. Those who will do harm to the body must wear gas masks. /commodity -72. Or gas masks to prevent organic gas poisoning.

Wear acid-resistant labor protection articles when pickling. When preparing pickling solution, water must be added first and then acid must be added, and it should be carried out according to the technical regulations, so as to avoid splashing sulfuric acid and burning human body. Hold it steady during operation to prevent the acid barrel from being damaged by falling, and the leaked acid should be handled in time.

1. Wear labor protection articles before going to work.

2. Operators should be trained in safety technology and be familiar with the operation method of this machine and the purpose of each button. Workers who are not familiar with the efficiency of this equipment are not allowed to operate.

3. Before driving, check whether the transmission parts of the machine are accessible, whether the screws are loose and whether the protective devices are complete.

What harm does the cable of spot welder do to your health? When the spot welder works, a large current flows through the cable, and a magnetic field will be generated around the cable. However, the cable sheath and air are not magnetic conductive media, so the magnetic field is very weak. Please rest assured that it will not cause harm to human body.

When working, the cable jitter is because the current-carrying conductor produces electromotive force in the magnetic field.

What jobs does the cable factory have? There are the following jobs:

statician

secretarial

Commercial quotation officer

sales representative

Market research and development experts

Wire and cable material surveyor

foreman

Chief quality inspector

Chief cable worker

Survey administrator

quality inspector

foreign trade salesman

Senior production management talents

Captain Lassi

Quality inspection supervisor

product development

Tension and torsion worker

Cable manufacturer

squeezer

Companies vary in size, and some are generally more than one person!

What harm does the water in the cable trench do to the cable? (1) After water enters the cable well (trench), the water depth in the trench reaches about 1m in some wells (trenches). Because of the difficulty of drainage, the patrol personnel can't go down the well for normal patrol, which affects the quality of patrol, and makes the hidden dangers in patrol not be found in time, which not only affects the normal patrol, but also has the danger of expanding patrol failure, and the cable head is easy to break.

(2) After water enters the cable well (trench), moisture will be generated. If the cable cracks due to construction or product quality problems, water vapor will not only destroy the insulation of the cable, but also cause the cable to burst due to water ingress.

(3) At the beginning of the transformation of the two networks, the high-voltage junction box was placed in the cable shaft, which led to the high-voltage junction box being soaked in water for a long time. The normal execution of the equipment is affected, and the equipment is corroded, which is easy to cause failure.

(4) When laying a cable, the cable head wrapped with plastic paper will sometimes be immersed in water, so that water can enter the cable. When pulling the pipe and threading, sometimes the outer sheath breaks, which makes the cable penetrate into the water.

(5) Because there is water in the cable shaft (trench), the cable head is not made in time after laying, so that the unsealed cable mouth is exposed to the air for a long time, or even immersed in the water, so that a large amount of water vapor enters the cable, causing the cable to burn or break down.

(6) When making cable heads (including terminal heads and intermediate joints), due to the carelessness of the producers, the cable heads sometimes slide into the cable shaft with the water.

(7) During the execution of the cable, when the intermediate joint fails, the accumulated water in the cable shaft will enter the cable along the gap. In the construction site, cable damage or breakdown caused by external force will also cause cable to enter water.

What harm does the water in the cable trench do to the cable? The water in the cable trench is basically rainwater, which is corrosive. It will corrode the cable. It's okay for a short time, but it will do some damage to the cable for a long time. In addition, we also need to look at the quality and structure of the cable itself. If the outer sheath of the cable is slightly damaged, moisture can enter the cable, which will inevitably lead to water tree creepage. Affect the conductive quality. Over time, it will also lead to collapse. It is more dangerous to have cable connectors.

Does the smell of living next to the cable factory affect your health? Halogen compounds will be produced in the process of cable insulation, crosslinked polyethylene will be produced in the process of cable manufacturing, which is toxic to human body, and the gas produced in the process of metal sheath welding is also toxic. Regular cable manufacturers attach great importance to these links. The first is to ensure the personal safety of production workers, and the second is the rigid requirements of the environmental protection department. Living next to you reasonably, you can't smell anything. If you are in doubt about the odor composition, you can directly ask the environmental protection department personnel to accompany you to check the environmental protection link of the enterprise, or you can ask yourself at home, and ask the relevant personnel of the manufacturer to show the proof that the odor is non-toxic to the human body and take photos. The relevant laws, regulations and procedures are very mature. For the health of yourself and your family, it's right to bother to check it out!

What harm does it do to your health to be an inspector in an electroplating factory? Eye injury and kidney injury.