Does the sweeping in the sweeping lamp with cement mortar backing mean collecting light?

Cleaning is an essential process in the production of glass cover plate. The previous glass processing technology is CNC+scanning+cleaning+flat grinding+cleaning+screen printing. With the progress of the times, domestic glass raw material manufacturers have been able to process the smoothness of glass surface to a high level, so in some places, the flat grinding process is omitted, and CNC+2.5D processing+sweeping+cleaning+screen printing is directly used. The difficulty of polishing powder cleaning is that it is difficult to clean after drying. In the actual production process, there are two main reasons that lead to the difficulty in cleaning polishing powder: ① After the polishing process, it takes too long for Chajia to be transported to the cleaning machine, and the edge of 2.5D is very thin, which leads to the drying of polishing powder and the uncleanness of cleaning. In general, during the transition period of cleaning and cleaning, the glass plate should be soaked in clean water. If it is still not cleaned, the problem of clean water should be raised to about 50 degrees, and the soaking time should not be too long, not more than half an hour, otherwise it will be easily cleaned. (2) The reason for sweeping the light pad. Traditional sweeper uses vacuum negative pressure to adsorb glass plates. If the polishing pad is used too hard, the edge of the glass is not completely absorbed, resulting in partial inclination, and it is difficult to clean this part of polishing powder after drying. Some polishing pads are not effective, and this kind of imagination may appear after less than one month of use, which can generally be solved by replacing the polishing pad. Feinell Technology and after-sales engineers jointly provide technical support. AK 162, which was developed in 20 15 years, is specially designed for polishing powder and is well recognized by customers.