Hello, I just set up a dangerous chemicals trading company here. Guiyang, Guizhou has no warehousing and no production company.

Hazardous chemicals safety management system and post safety operation procedures

1 Purpose and scope

Standardizing the management of hazardous chemicals to ensure the production safety of enterprises.

This system is applicable to the production, use, transportation, procurement, sales and storage of hazardous chemicals within the company.

2 compilation basis

This system is formulated according to the Law on Safety in Production, Regulations on Safety Management of Hazardous Chemicals, Regulations on Safety in Production in Shandong Province and Safety Standardization Specification for Hazardous Chemicals Business Units (for Trial Implementation).

3 responsibility

3. 1 The management department is responsible for preparing emergency rescue plans for hazardous chemical accidents, organizing drills regularly and filing them with relevant government departments.

3.2 The management department is responsible for the registration and general survey of hazardous chemicals in enterprises, compiling safety technical specifications and safety labels according to the general survey, and registering with relevant departments and institutions.

3.3 The management department is responsible for cooperating with enterprises to carry out various forms of safety education and educating factory employees about hazards.

3.4 The company shall set up a 24-hour alarm and consultation telephone.

3.5 Each centralized management department shall conduct safety inspection according to the Safety Management System for Hazardous Chemicals, establish corresponding management and inspection accounts, inform relevant parties of the hazards, and provide safety technical guidance to relevant parties using hazardous chemicals of the enterprise.

4 control program

4. 1 production and use

4. 1. 1 The workshop shall specify the storage time, place and maximum allowable storage capacity of dangerous goods according to production needs. The composition of raw materials and finished products should be determined by laboratory tests. Materials with conflicting production preparation properties shall not be placed in the same area and must be clearly separated.

4. 1.2 Places producing and using highly toxic substances and their operators shall strictly implement the safety management system for highly toxic and dangerous chemicals formulated by enterprises, and must strengthen safety technical measures and personal protective measures.

4.2 Safety technical measures

4.2. 1 Transform the process and adopt safe production conditions to prevent and reduce the leakage of poisons.

4.2.2 Replace open operation with closed, isolated and ventilated operation.

4.2.3 Strengthen equipment management to prevent running, running, dripping and leakage.

4.3 Personal protective measures

4.3. 1 Equipped with special labor protection articles and appliances, which shall be kept by special personnel, regularly overhauled and kept in good condition.

4.3.2 Direct contact with articles is strictly prohibited, and eating and drinking in production and use places are not allowed.

4.3.3 Wear labor protection articles correctly, and change work clothes and clean them before leaving the workplace.

4.3.4 In places where toxic substances are found, a certain number of emergency detoxification drugs should be equipped.

4.4 When compressed gas and liquefied gas (such as liquid chlorine, liquid oxygen, acetylene, liquefied petroleum gas, oxygen, carbon dioxide, nitrogen, etc.) are mixed. ), the cylinder should have a residual pressure of not less than 0.05 Mpa to prevent other substances from entering.

4.5 The containers containing corrosive substances should be carefully selected. Oxidative acidic substances cannot be mixed with flammable liquids, flammable solids, spontaneous combustion substances and wet combustion substances, and it is strictly forbidden for acidic substances to meet cyanide.

4.6 It is forbidden to use open flame to heat flammable materials. In the process of high temperature reaction or distillation, if flue gas, organic heat carrier and electric heating must be used, strict isolation measures should be taken.

4.7 In the production and use of dangerous goods, necessary measures such as exhaust, ventilation, pressure relief, explosion prevention, backfire prevention, static elimination, emergency discharge and automatic alarm should be taken according to the fire danger and toxicity in the production process.

4.8 When transporting toxic and harmful substances, measures should be taken to prevent leakage.

4.9 conveying solid oxidant, flammable solids, etc. , should prevent friction and impact.

4. 10 For large flammable, explosive and toxic articles that are easy to escape gas and materials, there should be safety facilities that can quickly stop feeding and prevent gas and materials from escaping, and there should be methods to capture, detoxify and salvage the lost dangerous articles to avoid the deterioration of the situation.

4. 1 1 All steam (water) pipes used to produce toxic and harmful gases must be separated from domestic steam (water) pipes, and working gas (liquid) pipes with different purposes shall not be connected.

4. 12 The discharge of waste water, waste gas, waste residue and dust generated in the process of production and use must meet the relevant national discharge standards, and all wastes that can cause chemical reactions and cause new hazards shall not be discharged together.

4. 13 loading and unloading transportation

4. 13. 1 To consign dangerous goods, you must show relevant certificates and go through the formalities at the designated railway, transportation and shipping departments. The consigned goods must conform to the names listed on the consignment note, and the consigned dangerous goods not listed in the national name list should be accompanied by the technical appraisal certificate approved by the superior competent department.

4. 13.2 The loading and unloading personnel of dangerous goods should wear corresponding protective articles according to the nature of the dangerous goods to be transported. When loading and unloading, it must be handled with care. It is forbidden to drag, weigh and rub, and the packaging container must not be damaged. Pay attention to the signs for safe stacking.

4. 13.3 Before loading and unloading dangerous goods, the vehicle loading and unloading tools shall be ventilated and cleaned, and no residue shall be left. Vehicles loaded with toxic substances must be cleaned after unloading.

4. 13.4 when transporting explosive, highly toxic, radioactive, flammable liquids, flammable gases and other articles, the means of transport that meet the safety requirements must be used, and the following matters should be paid attention to during operation:

It is forbidden to transport explosives by battery cars, dump trucks, forklifts and bicycles. When transporting strong oxidants, explosives and a class of flammable liquids packed in iron drums, iron-bottomed cars and car trailers are not allowed without reliable safety measures; Forklifts, forklifts and dump trucks are prohibited from loading and unloading inflammable and explosive liquefied gas and other dangerous goods; When transporting dangerous goods such as liquefied gas and flammable liquids in high temperature areas, there should be sun protection facilities; The transport of radioactive materials should use special transport vehicles and lifting frames, and the load of loading and unloading machinery should be reduced by 25% according to regulations; It is forbidden to use small motor boats, small wooden boats and cement boats to carry articles that burn in water and have toxic substances.

4. 13.5 when transporting explosive, highly toxic and radioactive articles, there should be a special person to escort them, at least two people.

4. 13.6 vehicles transporting dangerous goods must maintain a safe speed and distance. Overtaking, speeding and forcible overtaking are strictly prohibited. The driving route for transporting dangerous goods must be approved by the local public security traffic department in advance and transported according to the designated route and time. Driving and stopping in busy streets are not allowed.

4. 13.7 Motor vehicles transporting inflammable and explosive articles shall be equipped with flame arresters in their exhaust pipes and hung with "Dangerous Goods" signs.

4. 13.8 when transporting bulk solid dangerous goods, measures such as fire prevention, explosion prevention, waterproof, dustproof and shading should be taken according to the nature.

4. 14 scrapping treatment

4. 14. 1 packing boxes, paper bags, bottles, barrels, etc. Toxic substances after use must be strictly managed, recycled by ministry of materials and equipment, registered, and managed by a designated person, and treated as follows:

1) Iron packaging containers shall not be used for other purposes without thorough cleaning;

2) Packaging containers must be recycled by qualified professional recycling companies.

4. 14.2 Scrapping hazardous chemicals, radioactive substances and other wastes must be applied in advance, and careful safety measures must be formulated before they can be handled with the approval of the local competent department.

4. 14.3 All dismantled containers, equipment and pipelines containing dangerous goods must be cleaned first, and can only be scrapped after passing the inspection.

4. 14.4 the management of hazardous chemical waste residue generated in the production process must be strengthened, and it is not allowed to be transported out with general garbage.

5 related systems

Safety management system for warehouses and tank farms and safety management system for transportation and loading and unloading of dangerous chemicals.

6 related records

6. 1 Safety Checklist for Hazardous Chemicals.

6.2 Management account of each centralized department.