Craftsman resume model essay reference?

A good resume is a powerful statement to sell yourself. A well-written resume is expected to be favored by employers, otherwise it may be ignored. Therefo

Craftsman resume model essay reference?

A good resume is a powerful statement to sell yourself. A well-written resume is expected to be favored by employers, otherwise it may be ignored. Therefore, resume is an important factor for successful job hunting. The following is what I compiled for your reading.

Craftsman's resume:

Name: Mr. Liang Gender: Male

Marital status: Married ethnic group: Han nationality

Household registration: Shaoyang, Hunan Age: 35

Current position: Foshan, Guangdong Height: 168cm

Hope regions: Foshan, Zhongshan and Guangzhou.

Desirable position: industry/factory -IE/ industrial engineer

Mechanical Electrical/Instrumentation-Mechanical Design/Manufacturing Engineer

Looking for positions: process supervisor, process engineer, fixture design engineer.

Education experience

1995-09 ~ 1998-07 School of Business Administration, Hunan TV University

1992-09 ~ 1995-07 Wugang No.1 high school

Training experience

20 10-08 ~ 20 10-08 manipulator and laser welding of Dazu laser science and technology company

IE course of Foshan Yingshun Kitchen & Bathroom Products Co., Ltd. from May 2009 to October 2009.

* * Company 20 1 1-06 ~ till now

Company nature: joint-stock enterprise industry category: furniture, household appliances, handicrafts, toys.

Position: Process Engineer Job Category: Process Engineer

Job description:

Mainly responsible for the company's product production process and abnormal production analysis and improvement, new product trial production, batch production follow-up, fixture design, mold structure improvement, etc.

1, new product manufacturing process feasibility analysis, prototype trial production and trial production problem improvement, trial production and mass production tracking, abnormal problem analysis and handling;

2. Make, update and maintain various process documents;

3. Production capacity evaluation, fixture evaluation and design, equipment demand evaluation, standard working hours, working procedures, unit price and technological process formulation;

4, mold, fixture, welding, grinding wire drawing, CNC and other abnormal problems in production and processing;

5. Abnormal production analysis and problem solving.

6. Continuous improvement of production technology and improvement of production capacity;

7, production site, device planning;

8. Improve production efficiency and control production costs;

9. Maintenance and management of various production equipment;

10, workshop safety production supervision and management;

* * Company 2007-10 ~ 2011-06

Company Nature: Foreign-funded enterprise Industry Category: Other production, manufacturing and processing.

Position: Process Engineer Job Category: Process Engineer

Job description:

Mainly responsible for the company's product technology and fixture design;

1, feasibility analysis of new product manufacturing process, prototype trial production and trial production problem improvement, trial production follow-up;

2. Make, update and maintain various process documents;

3. Production capacity evaluation, fixture evaluation and design, equipment demand evaluation, standard working hours and process flow formulation.

4. Abnormal production analysis and problem solving.

5. Continuous improvement of manufacturing technology and improvement of production capacity;

6. Lead the automatic welding project;

7. Familiar with IOS quality management system and "6S" management;

Joined * * Kitchen Company in 2007, mainly responsible for the design and manufacture of fixtures and non-standard devices; Design: Semi-automatic wire drawing machine, semi-automatic belt sander, special plane for pre-spot welding of water heater liner, special plane for straight seam grinding of water heater liner, and special plane for automatic straight seam welding can improve the efficiency of oil smoke extraction and water heater product processing 15% and improve the appearance quality;

In 2009, he switched to process engineer; Mainly responsible for the company's product technology and fixture design, during which I received systematic IE engineering training; The foaming deformation of stainless steel shell of water heater was solved, and the deformation rate was reduced from 40% to 3%. The process problems such as welding of water heater liner, welding deformation of range hood and barbecue oven are solved. And participate in the improvement projects such as rapid die change improvement and appearance texture improvement of pumping units;

20 10 was promoted to engineer level 2 due to outstanding work performance; Robot laser welding and robot argon arc welding, which also lead the automatic welding project;

* * Company from February 2006 to July 2007.

Company nature: private enterprise industry category: other manufacturing and processing.

Position: Fixture Engineer Job Category: Fixture Engineer

Job Description: Mainly responsible for the manufacture, assembly and maintenance of automation equipment and production fixtures.

Such as automatic tapping machine, automatic tapping machine and automatic assembly machines.

* * Company from June 2003 to February 2006

Company Nature: Foreign-funded enterprises Industry Category: Electronics, Microelectronics Technology, Integrated Circuit

Position: Job Category: Mechanical Design/Manufacturing Engineer

Job Description: Our factory is a professional manufacturer of various health pounds. I am mainly engaged in the production of jigs, planks and production equipment, such as electric and pneumatic test equipment, which have been exported to Europe and America.

* * Company from April 2002 to April 2003.

Company nature: private enterprise industry category: other manufacturing and processing.

Position: Job Category: Mechanical Design/Manufacturing Engineer

Job Description: Our factory is a private processing enterprise. I am mainly engaged in hardware mold making and wire cutting, and have mastered the general hardware mold making technology and the operation of Chinese wire cutting machine and autop software.

Project experience

Automatic welding of range hood 2009-10 ~ 2011-03

Position: Chief Engineer

Project description: automatic welding project of range hood: using modern welding tool manipulator+laser welder to weld products to achieve the goal;

1, reducing personnel demand, improving production efficiency and ensuring the stability of output;

2. Ensure the welding quality of products is stable, thus reducing the requirements of welding quality for personnel;

3. Reduce the damage of welding to production personnel and ensure the health of production personnel;

Responsibilities: lead the automatic welding project of range hood;

1, responsible for the integration of modern welding tool manipulator and laser welder;

2. Responsible for the programming and operation training of manipulator and laser welding machine;

3. Be responsible for collecting and testing welding process parameters of different materials, different thicknesses and different overlapping methods, and formulating welding process parameters;

4. Lead the trial production and mass production of automatic welding of hood shell, barbecue oven cover and panel;

5. Prepare relevant guidance, operation and welding process documents;

Skill expertise

Title:

Computer level: intermediate

Detailed computer skills: proficient in AUTOCAD2004 drawing software and Solidworks drawing software;

Skills and expertise: 1, rich working experience in the manufacturing process of range hoods, barbecue ovens and electric water heaters for many years, familiar with IE improvement methods, and strong ability to solve abnormal problems on site;

2. Robotic laser/argon arc welding Fanuc, Panasonic, Mortman and ABB have rich practical experience in welding technology, operation and welding technology;

3. Have rich design experience in special equipment and clamps used for welding, grinding and drawing kitchen and bathroom products;

4, familiar with stamping, CNC, wire drawing and other cold working equipment, familiar with metal molds, and have certain knowledge and experience in metal wire drawing;

linguistic competence

Mandarin: fluent cantonese: average

English level:

Other: general

working strength

Development direction: 1: process supervisor; 2: Process Engineer

Can give full play to many years of technical experience in kitchen and bathroom, hardware products, and make the greatest efforts for the enterprises they serve in terms of production efficiency, product quality and product cost.

Other requirements:

Own situation

Self-evaluation: 1. I have many years of experience in process engineering, familiar with the process flow of range hood, barbecue oven, electric water heater and embedded electric oven, and have rich working experience in stamping, sheet metal, welding, assembly process and on-site process problem solving; Be able to quickly introduce new products, evaluate product capacity and equipment, etc. Improve product production efficiency, control production cost, analyze production/quality anomalies in time, and solve problems quickly. Familiar with IE technology, able to use IE technology to analyze and continuously improve the process. Proficient in Panasonic, Fanuc and Mortman manipulators;

2. I have been engaged in mechanical manufacturing and design for several years, and have rich practical experience in welding, polishing and wire drawing clips of kitchen and bathroom products, and have a deep understanding of automatic and semi-automatic equipment;

3. I have a strong sense of obedience, strong communication skills, strong adaptability and pressure resistance, and good personal qualities and professional ethics; Strong organizational and management skills;

Familiar with ISO*** quality management system and "6S" management; Can contribute to the modernization and standardized management of enterprises;

Biography of craftsman fan:

Last name:

Gender: male

Marital status: Married ethnic group: Han nationality

Household registration: Zhuhai, Guangdong Age: 32

Current location: Guangdong-Zhuhai Height: 172cm

Hope areas: Guangdong, Hunan-Changsha and Shanghai.

Desirable position: industrial/factory-new product import engineer

Mechanical Electrical/Instrumentation-Mechanical Design/Manufacturing Engineer

Mechanical Electrical/Instrumentation-Structural Designer

Looking for positions: mechanical designer, product project management engineer, product structuralist.

Education experience

From September 2002 to July 2006, he majored in material forming and control engineering.

* * Company 20 1 1-0 1 ~ till now.

Company Nature: State-owned enterprises Industry Category: Machinery manufacturing, mechanical and electrical equipment, heavy industry.

Position: Product Technician Job Category: PE/ Product Engineer

Job Description: Mainly responsible for product process development of duct air conditioners, including product structure review, signing and review of drawings and details, compilation and distribution of graphics and texts, compilation and distribution of BOM of production details, compilation and distribution of assembly work instructions, man-hours required for assembly, assembly tooling, testing and inspection, confirmation of new product process review tooling, confirmation of test content, confirmation of process auxiliary materials consumption, product review and trial production, follow-up treatment of small batch trial production, and quality issues.

* * Company July 20, 200710-08

Company nature: foreign-funded enterprise industry category: office equipment, cultural and sports leisure products.

Position: Job Category: PE/ Product Engineer

Job description:

1. Responsible for the introduction of new products in mass production of laser printers. Responsible for the L1049/L1071L1082 model, including: making detailed Gantt plans and monitoring project nodes, including schedule assurance and quality assurance; Coordinate Japanese R&D, assembly, quality assurance, production management, commissioning and suppliers. Work together to meet the technical requirements related to products; Using VE method, combining with the function to review the processing cost of parts, and using the knowledge of machinery and mold to review the drawings; Review the countermeasures of quality problems, such as shape change, assembly process change and specification change.

2. The drawing review of plastic and sheet metal parts includes: the use of recycled materials, the relaxation of dimensional tolerance, the review of material carving, the damage countermeasures of burrs, the rotational strength of riveted shafts, the review of measuring methods and measuring tools, etc.

3. The review of spring and rubber roller parts includes: the review of engineering bearing capacity or dimensional tolerance, the review of fatigue resistance, the review of measuring method of rubber roller rotational strength, the review of dimensional tolerance, etc.

4. Participate in the review of plastic sheet metal mold structure, the analysis of P.L line of plastic mold, the analysis of nozzle and runner, the analysis of ejector pin arrangement, etc. Sheet metal die layout, structure type, single die, sequential die, compound die, etc.

5. Review the overall composition of a printer, including: the parts used and their quantity, the connection position of the parts, etc. The failure mode, specification of technical parameters, specification of oiling position and amount, locking and loosening torque of self-tapping screws, labeling standards and labeling specifications during printer assembly are summarized.

6. Review the quality problems in mass production, such as gap difference exceeding specifications, crack of sliding teeth in screw holes, poor printing accuracy and human aberration; SPC controls the precision of important reference frames of products, MSA analysis of important measuring tools, etc. Issue relevant technical instructions, operation instructions and abnormal instructions. Cooperate with Japanese R&D department to complete the collection and analysis of technical data; Coordinate and solve technical problems related to organization, QA and suppliers.

Reason for leaving: Contract expired.

* * Company from June 2006 to July 2007.

Company nature: joint venture industry category: office equipment, recreation and sports products.

Position: Job Category: Product Development Manager/Supervisor

Job description:

1. Be responsible for the structural development and process of compatible ink cartridges, including product structure drawing, product structure design change drawing processing, subsequent manufacturing process, etc.

2. Formulate the production process of compatible ink cartridges and related evaluation and test items.

3. Deal with abnormal quality problems of the corresponding production line, such as ink jet disconnection, ink leakage, poor welding, etc.

Skill expertise

Title:

Computer level: intermediate

Detailed explanation of computer skills: I am proficient in OFFICE, especially in data analysis and processing of EXCEL, and can use 6σ method to make statistical analysis of data, such as Gantt chart, histogram and normal chart. , can make better PPT, and be familiar with the mechanical design software PROE.

Skills and expertise: Familiar with structural analysis, design and processing technology of plastic, sheet metal, spring, rubber, self-adhesive label and other products, familiar with 6σ data processing and analysis technology, familiar with process management of product development projects, with more than 3 years experience in product development and design.

linguistic competence

Mandarin: fluent cantonese: poor

English level: CET-4 oral English is average.

English: Japanese is good: average.

working strength

Development direction: To become a qualified product project management engineer, check the design drawings, and be familiar with the design principles of various products, such as plastic gears, springs, rubber and sheet metal. And improve the project management technology of product development, so as to enhance their own capabilities and seek greater and further development!

Other requirements:

Own situation

Self-evaluation: I am self-motivated, practical, diligent, cooperative, hard-working, and have solid professional theoretical knowledge. I know the quality management system of TS 16949 and its six core tools APQP/CP/MSA/SPC/PPAP/FMEA. Understand the Six Sigma IDDOV design of new product life cycle: identify, define, design, optimize and verify the development process; Good at using JMP to improve DMAIC of DFSS and six projects of Sigma in design for six sigma; Familiar with the preparation and maintenance of BOM details in modular production; Able to use dimensional engineering GD &；; Adopt T and RPS benchmark system to design parts, and be familiar with the processing and management requirements of parts drawings; Familiar with the structure and processing of injection mold and sheet metal mold; Clearly understand the design changes of graphics and text and the switching of old and new products of parts; Able to use Pro/E Wildfire Edition and other software to develop and design mechanical products. I passed the china association for quality Black Belt Qualification Examination 20 1 1. As the core personnel, he participated in the Six Sigma project of "Reducing Refrigerant Emissions from Commercial Internal Units" and won the excellent Six Sigma project in china association for quality.

Three resumes of craftsman Fan Wen:

Name: XXX

Gender: male

Ethnic group: Han nationality

Political characteristics: League members

Education: Bachelor's degree

Major: industrial electrical automation telephone:

Contact address:

academic degree

Graduation school: Nanjing University of Technology, September 20, 200911.7, majoring in industrial electrical automation.

Main courses: automatic control principle, electric drive, electronic technology, automatic test system, computer organization and structure, computer hardware and interface circuit design, assembly language programming, software engineering computer network principle and other courses.

Other: Other training information *

CET-4, strong reading and translation skills.

Work experience: So far, I have worked in 3 companies for 2 years and 6 months.

Recent work experience

Jiangsu Zongshen Motorcycle Manufacturing Co., Ltd. 20 12-05 ~ 20 13-04

Job description:

1. Hot pressing process, parameter optimization;

2. Analysis and treatment of abnormal hot pressing:

3. Follow up the import of new products;

4.4. Analysis and treatment. CTP dysfunction.

Specialty: More than 2 years experience in product research and development, standardization or process technology and management in machinery manufacturing industry, with innovative ability, strong professional management ability, organization and coordination ability and decision-making execution ability.

working strength

Position: Process Engineer/Technical Engineer

Application industry: machinery/equipment/heavy industry

I am gentle, modest, self-disciplined and confident.