What does the project supervisor mainly do?

Question 1: What is the main purpose of project supervision? The so-called construction project supervision refers to the professional service activities of engineering supervision enterprises with corresponding qualifications, accepting the entrustment of the construction unit, undertaking its project management and supervising and managing the contractor's construction behavior on behalf of the construction unit. The main methods of supervision are planning, control and coordination. The main task of supervision is to control the investment, progress and quality of construction projects. The basic purpose of supervision is to assist the construction unit to say that the construction project is completed and put into use within the planned target. Premise, learn and master the relevant construction and acceptance specifications and the corresponding atlas, so as to have a preliminary concept of construction drawings, symbols, materials, materials, etc. Work and study, and you can keep up slowly until you are proficient. Look at the drawings first, and divide the large system into small systems, from big to small, all the way down to the end, so as to have a preliminary system concept. At work, simplicity is simplicity, and complexity is complexity. I told you to keep it simple. Ask the supervisor modestly. Don't be embarrassed. You just graduated, even if you pretend to be awesome in the company, others will not treat you like a dish. It is good for you and everyone to ask modestly. Say "dare" to the construction unit, but don't say "chaos". If you don't understand, you'd rather pretend not to see it than talk nonsense. See if there are any problems. If you are not sure, go back and look at the drawings and instructions before you speak. "Dare" to speak is to make the construction unit feel that you are reasonable and dare to speak. Don't talk "disorderly" is to make the construction unit feel that you don't talk much at ordinary times, but as long as you say it, you will hit the nail on the head and dare not underestimate you. In this way, the director can see that you can control the construction unit, let you rest assured of the independent building number and let you get promoted as soon as possible. Besides, I don't agree with what is said upstairs, that is, to be a director. That's true, but what happened to the director? Almost every director in my unit contracts projects by himself, and no director has an annual salary of less than 200,000. No matter how high the annual salary is, it doesn't make sense. Good luck! You can send me a message if you have any questions! ~~

Adopt it

Question 2: What is the main job of project supervision? The so-called construction project supervision refers to the professional service activities of engineering supervision enterprises with corresponding qualifications, accepting the entrustment of the construction unit, undertaking its project management work, and supervising and managing the contractor's construction behavior on behalf of the construction unit.

The main methods of supervision are planning, control and coordination.

The important task of supervision is to control the investment, progress and quality of construction projects.

The basic purpose of supervision is to assist the construction unit to say that the construction project is completed and put into use within the planned target.

Premise, learn and master the relevant construction and acceptance specifications and the corresponding atlas, so as to have a preliminary concept of construction drawings, symbols, materials, materials, etc. Work and study, and you can keep up slowly until you are proficient. Look at the drawings first, and divide the large system into small systems, from big to small, all the way down to the end, so as to have a preliminary system concept. At work,

In fact, simplicity is simplicity and complexity is complexity.

Let me briefly say,

Don't be shy to ask the supervisor for advice. You just graduated, even if you pretend to be a cow again, others will not treat you like a dish. It is good for you and everyone to ask for advice modestly.

Say "dare" to the construction unit, but don't say "chaos". If you don't understand, you'd rather pretend not to see it than talk nonsense. See if there are any problems. If you are not sure, go back and look at the drawings and instructions before you speak. "Dare" to speak is to make the construction unit feel that you are reasonable and dare to speak. Don't talk "disorderly" is to make the construction unit feel that you don't talk much at ordinary times, but as long as you say it, you will hit the nail on the head and dare not underestimate you. In this way, the director can see that you can control the construction unit, let you rest assured of the independent building number and let you get promoted as soon as possible.

Besides, I don't agree with what is said upstairs, that is, to be a director. That's true, but what happened to the director? Almost every director in my unit contracts projects by himself, and no director has an annual salary of less than 200,000. No matter how high the annual salary is, it doesn't make sense.

Good luck! You can send me a message if you have any questions! ~~

Question 3: What should the supervisor do? 500 points is not enough to explain to you.

First of all, you should determine your role, be professional, not offside, and not be absent.

Second, collect your own professional atlas, specifications, standards and other materials, and flip through them if you have nothing to do.

Third, after you get to work, you should first be familiar with the site environment, apply for drawings, construction contracts and other related information. The necessary data should be very clear. If the leader or Party A asks, you can answer immediately.

Four, starting from the foundation, carefully read the drawings, technical standards and comprehensive geological exploration report when checking the trough.

Raw materials are delivered to the site and sent for inspection throughout the whole project, so witness sampling is necessary.

Five, make relevant records, strengthen the control in advance. It's best not to do things with hindsight. If you do it yourself, leaders and construction units will feel disgusted.

Six, safety work can not just talk without practice, but should focus on implementation. Generally speaking, no one dares to neglect this work, and they will not say anything if they turn their faces and let them rectify.

Seven, the project quality should also strengthen the control in advance, patrol supervision. When problems are found, they should be dealt with immediately. The new construction site will give them some color to see see and come up with their own work style. They must be tough, but they can't be unreasonable and wait for no one.

Eight, the decoration materials are complex, and various models are row upon row. It is necessary to strengthen the check with the inspection list and squeeze out the water inside, such as wall thickness, material, brand and so on.

Nine, strengthen the signing of building materials. Don't delay. If you can't sign, don't sign, and give a clear reason. So as not to make the construction unit mistakenly think that you want to have any wild desires. Don't make up afterwards, pay equal attention to your own supervision information and the information of the construction unit.

Ten, due to limited time and ability, we can't list all the main points of the supervision industry, but the important thing is the usual accumulation and working attitude. This is very important.

Look at your question and you will know whether you are a new student or other novice, but it doesn't matter. Keep your noble head down, ask for advice with an open mind and learn with an open mind.

Question 4: What does a project supervisor do? Construction project supervision refers to a special activity of a legally qualified engineering supervision unit to supervise the quality, time limit for a project and the use of construction funds on behalf of the employer on the basis of laws, administrative regulations and relevant technical standards, design documents and construction project contracts. As the owner of the construction project, it is necessary to supervise the contractor's construction activities in order to obtain good investment benefits, ensure the project quality and reasonably control the construction period. However, most employers are not good at the organization and technical supervision of engineering construction. Professional engineering supervision units composed of personnel with professional knowledge and practical experience in engineering construction have great advantages in safeguarding the interests of employers, coordinating the relationship between employers and contractors, ensuring engineering quality and standardizing the order of the construction market by accepting the entrustment of employers. Construction project supervision system has a long history of development in the world. Western developed countries have formed a complete engineering supervision system. It can be said that construction project supervision has become an international practice in the field of construction. With the development of reform and opening up, China has also implemented the supervision system in engineering construction.

Construction project supervision is a measure taken by the owners of construction projects to ensure the project quality, control the project cost and construction period and safeguard their own interests. Therefore, in principle, it is up to the employer to decide whether to supervise the construction project. However, for construction projects using state financial funds or other public funds, in order to strengthen the supervision of project construction, ensure the investment benefit and safeguard the national interests, the state has stipulated the scope of construction projects subject to compulsory supervision. For the project subject to compulsory supervision, the employer must entrust the project supervision unit to carry out supervision according to law. For other construction projects, it is up to the employer to decide whether to carry out project supervision. If project supervision is needed, the employer shall entrust a project supervision unit with corresponding qualifications to carry out supervision. The employer and the entrusted project supervisor shall conclude a written supervision contract, which is the basis for the project supervisor to supervise the project construction. The relationship between the employer and the project supervisor is a contractual relationship between equal subjects in nature. Therefore, the relationship between the rights and obligations of the employer and the supervisor and their legal responsibilities shall conform to the relevant provisions of the Contract Law and other laws and administrative regulations.

Before the implementation of project supervision, the employer shall notify the contractor of the supervised construction project in writing of the name, qualification grade, supervision personnel, supervision content and supervision authority of the entrusted supervisor. The construction project supervision unit shall, on behalf of the employer, supervise the quality, time limit for a project and the use of construction funds in accordance with laws, administrative regulations and relevant technical standards, design documents and construction project contracts. If the engineering supervisor finds that the engineering design does not meet the quality standards of the construction project or the quality requirements agreed in the contract, he shall report to the employer and ask the designer to correct it; If the supervisor thinks that the project construction does not meet the engineering design requirements, construction technical standards and contract stipulations, he has the right to ask the constructor to correct it. In the process of supervision, engineering supervisors shall abide by the objective and fair professional standards and shall not collude with the contractor to seek illegal interests for the contractor.

If a project supervision unit fails to perform its supervision obligations as agreed in the entrusted supervision contract, fails to inspect or inspect the projects that should be supervised according to the requirements and inspection methods stipulated in laws, administrative regulations and relevant technical standards, design documents and construction project contracts, thus causing losses to the employer, it shall bear the corresponding liability for compensation. For example, the unqualified project construction quality is usually related to both the contractor's failure to carry out the construction as required and the supervisor's failure to perform the supervision obligations as agreed in the contract. In this case, both the contractor and the supervisor shall bear their respective liabilities for compensation, and how to determine the corresponding liabilities of the supervisor shall be decided by the people's court or the arbitration institution. If the supervisor colludes with the contractor to seek illegal interests for the contractor and cause losses to the employer, he shall be jointly and severally liable for compensation with the contractor.

Question 5: What do project managers usually do? If you know a lot of engineering knowledge, it will be a waste to be a supervisor. If you don't know anything, I'm afraid the consequences will be unimaginable. . .

Question 6: What does the supervisor mainly do? I graduated last year!

I've been in charge for a year!

Mainly quality supervision and supervision data sorting!

Half time at the construction site, half time in the office!

I suggest you learn more from the master! Look at the specifications!

The focus is on the construction site! Only in this way can there be a future! It's boring just to make information!

Question 7: What does a supervisor do? Entrusted by the owner, carry out the work of "four controls, two controls and one coordination" on behalf of the owner. The purpose of supervision is to be law-abiding, honest, fair and scientific. Four controls are progress, quality, investment and safety control; The two management are contract management and information management; Coordination is to coordinate the harmonious working relationship of all parties concerned in the construction site.

Question 8: What does an engineering supervision company do? Tell you a few companies related to it first, and you will understand. 1, real estate development company. 2. Engineering construction company. 3. Engineering supervision company.

The engineering supervision company is hired by the real estate development company, and has certain authority to supervise all the construction matters of the engineering construction company. If the engineering construction company does not listen to the reasonable suggestions of the supervision company, the supervision company can report to the real estate development company or even the engineering quality supervision station of the * * * department.

Question 9: What does the supervisor mainly do at the construction site? First, the coordination and management of project supervision in the construction stage

2) Management and coordination:

Coordination work should not only pay attention to technology, but also establish a perfect management system. Through management, the cooperation problems of various professions in construction will be reduced, and unified leadership with Party A, supervision engineer and project manager as the main body will be established, with special personnel under unified command to solve the coordination work of various construction units. As Party A, supervision engineer and project manager, we should first fully understand and master the working procedures and design requirements of various disciplines. Only in this way can it be possible to co-ordinate the construction teams of various disciplines and ensure that every link of the construction is in place in an orderly manner.

Establish a responsibility system for problems, and establish a responsibility system step by step from management to team.

Establish a reward and punishment system, and establish a reward and punishment system on the basis of the responsibility system to improve the sense of responsibility and enthusiasm of construction personnel.

Establish strict concealment acceptance and intermediate acceptance system. Concealed acceptance and intermediate acceptance are the keys to coordinated management. At this time, the work has entered the physical stage from the drawing stage, and the problems between various professions are more vivid and intuitive, and the problems are easier to find, and it is also the easiest to solve and remedy. Through careful inspection by various departments, problems can be reduced to a minimum.

3) Organization and coordination:

Establish a special coordination meeting system. During the construction period, Party A and the project manager shall organize regular coordination meetings to solve the coordination problems in the construction. For complex parts, special coordination meetings should be organized before construction, so that all professional teams can further clarify the construction sequence and responsibilities.

4. Summarize experiences and lessons in time.

As a supervision engineer, we should be good at constantly summing up experiences and lessons in our work. Common coordination problems in construction include: coordination between electrical parts and civil engineering; Coordination between water supply and drainage and building structure; The relationship between the appearance, function and structure of the building; The relationship between prefabricated components, embedded parts, decoration and structure, the characteristics and requirements of construction; Coordination between auxiliary professions, etc.

5. Improve the professional level and comprehensive quality of supervisors.

The quality of products is inseparable from the level and quality of employees. While doing a good job in management, it is necessary to strengthen the technical training and professional level of supervisors, as well as their understanding and mastery of new technology products. Cultivate the professionalism and meticulous work style of construction personnel, leaving no trivial matters and future troubles in the construction.

Second, the work of project supervision in controlling project cost

1. Reasonable investment control in the design stage.

(1), choose the most reasonable design scheme in the form of design bidding, urge the design unit to adopt advanced technology and reduce the project cost;

(2) Evaluate the general layout scheme and single design scheme of the initial expansion design, and select the most reasonable scheme through calculation, comparison and analysis of technical and economic indicators;

(3) Implement quota design.

2. Assist the owner to select the best contractor in the bidding stage.

(1) Strictly taking the approved design budget as the control target, it is an important work for the project supervisor in the bidding stage to prepare the construction bidding documents, draft the terms of the construction contract, make the bill of quantities and quantity description, and assist the owner to select the contractor through bidding.

(2) Insist on bidding to determine a reasonable contract price and strengthen the qualification examination of the construction team. The quality of the construction team will directly affect the quality and duration of the project and play a decisive role in the economic benefits of the project. At the same time, determine a reasonable project contract price. Insisting on bidding and determining a reasonable contract price will play a positive role in schedule control and settlement in the construction stage. Supervision work must meet the requirements of the contract, and must be within the scope of national laws and policies to ensure that the payment given by each project meets the requirements of the contract. In engineering construction activities, the supervision engineer is in a dominant position, and whether the monetary income and expenditure behavior of contractors and owners is accurate and reasonable depends on whether the engineering cost signed by the supervision engineer is fair. Contract management is the basis of control and coordination, and it is also an economic and legal means, so it is very important to enhance the awareness of contract management and improve the contract terms.

(3) Equipment cost and material cost account for about 70% of the total cost in the construction and installation project, and are the main components of the direct cost of the project. Therefore, in the process of supervision, we should not ignore this part, introduce competition mechanism, carry out equipment and materials bidding, ensure product quality and reduce project cost.

3. Strictly review the project settlement at the completion stage.

Third, the quality supervision of project supervision in the construction stage

1. Establish and improve the quality assurance system and strengthen contract management.

Once supervisors enter the project quality supervision, they should first check whether the quality management of the construction site of the construction unit is correct. 2. Prior prevention of quality monitoring and prior guidance of construction work.

(1), required by the original project ... >>

Question 10: What does the project manager need to do? Project supervision is entrusted by the construction unit to carry out quality management, safety management, schedule management and investment control. It is the lowest wage industry in the construction industry at present. I am in Taiyuan, and a person with a supervision engineer earns about 2000 yuan a month, which may be higher in Beijing! I have a lot to do with the supervisor, mainly referring to the overall management of the project by the intermediary agency entrusted by Party A..

To sum up, the main tasks are: three controls, two controls and one coordination.

Namely: investment control, schedule control, quality control, contract management and information management; Coordinate all construction enterprises.

A project needs to set up a supervision project department, the main person in charge is called the chief supervision engineer, and usually someone with the qualification of registered supervision engineer is needed. The rest are generally professional supervision engineers and supervisors.

At present, in China, supervision is mainly entrusted by Party A, so it listens to Party A, but also manages Party B, which is the construction enterprise, so construction enterprises are generally more polite to supervision. Hehe, the position of supervisor is ok. However, supervision is sometimes very hard, because there are generally no holidays in construction, so supervision should always be present, especially for key parts and key processes, which need on-site supervision, so it is called standing by.