How far is it from Fujian Xiapu Expressway to Taimushan Expressway and how long does it take?

How far is it from Fujian Xiapu Expressway to Taimushan Expressway and how long does it take? It's a long drive It takes half an hour.

How long does it take to drive from Cangzhou Expressway to Cuierzhuang Expressway? The whole journey is about 2 1.9 km, about 15 minutes.

Starting point: Cangzhou West Toll Station

1. Start from the starting point in the east direction, drive along the ramp for 480 meters, turn right ahead and enter Yingbin South Avenue.

2. Drive along Yingbin South Avenue for 70 meters and turn around and enter Yingbin South Avenue.

3. Drive along Yingbin South Avenue for 340m, drive in the direction of G 18 1 1, and turn right slightly on the ramp.

4. Drive along the ramp 1.6km and go straight into Huangshi Expressway.

5. Drive along Huangshi Expressway 18.9 km, exit at Cuierzhuang /G307/S272, and turn right slightly on the ramp.

6. Drive along the ramp for 490 meters to reach the finish line.

End point: Cuierzhuang toll gate

How long does it take to take a taxi from Changzhi South Expressway? Hello, you can download a Tencent map with your mobile phone, or you can directly connect to Didi Travel. Didi Chuxing is an essential artifact for taxis. But if you want to look at the map and call a taxi, you need to download a Tencent map. The car inside is very nice. You just need to enter your location and where you want to go, and then choose the car you want to take, and you can see how much it costs to get to your destination. Very good.

How long does it take to drive from Shuozhou Expressway to Yuci Old Town Expressway? The whole journey is about 298.7 kilometers, and it takes about 4 hours and 30 minutes to arrive.

Starting point: Erguang Expressway entrance

1. Shuozhou driving plan

1) Start from the starting point to the east, drive along the ramp for 850 meters, and go straight into Erguang Expressway.

2) Drive along Erguang Expressway 12.9 km, exit Maolu /G208, and turn right slightly on the ramp.

3) Follow the ramp 1. 1 km and turn right slightly.

4) Drive for 270 meters, turn left and enter the yarn.

5) Drive along Maokou 120m and turn left on the ramp.

2. Drive along the ramp for 800 meters and go straight into Erguang Expressway.

3. Drive along Erguang Expressway for 226.4km, at the exit of Yangqu County/Huang Zhai/Yuxian Cangshan/Liangjiazhai Hot Spring, turn right slightly and get on the ramp.

4. Drive along the ramp for 930m, and then go straight.

5. Jinzhong driving plan

1) Drive for 290 meters and go straight into Xinyang West Street.

2) Drive along Xinyang West Street for 5 10 meters and turn right into Yangxing Avenue.

3) Drive along Yangxing Avenue 10. 1 km, turn right slightly and get on the ramp.

4) Drive along the ramp for 320 meters, turn right ahead and enter X256.

5) Drive along X256 for 60 meters and go straight into Wohushan Highway.

6) Drive along Wohushan Highway 1 1.8km, and go straight into Jianhe Road.

7) Drive 60 meters along Jianhe Road and go straight into G 108.

8) Drive along G 108 for 40 meters, head north towards Central Street (west)/Shengli Street (east)/North Street, and go straight into Jianhe Road.

9) Drive along Jianhe Road 1.3km, turn right slightly in the direction of Xiaodongmen Street/fu tung street/wulongkou Street, and enter G 108.

10) Follow G 108 100 meters and go straight into Jianhe Road.

1 1) Drive along Jianhe Road for 300 meters and go straight into Jianshe North Road.

12) Drive 3.2km along Jianshe North Road and go straight into Jianshe South Road.

13) Drive along Jianshe South Road 140m and go straight into Beijing-Kunming Line.

14) Drive 80 meters along the Beijing-Kunming line and go straight into Jianshe South Road.

15) Drive 4.5km along Jianshe South Road and go straight into Yu Tai Road.

16) Drive 6.5km along Yu Tai Road and go straight into G 108.

17) Drive 5.8km along G 108 and go straight into Huitong North Road.

18) Drive 5.9 kilometers along Huitong North Road and go straight into Huitong Road.

19) Drive along Huitong Road 1.8km and turn left into Shuncheng Street.

20) Drive along Shuncheng Street 1.3km and enter Huayuan Road.

2 1) Drive along Garden Road for 780m and turn around and enter Garden Road.

22) Drive along Huayuan Road for 70 meters and turn right.

23) Drive 1 10 meters and turn right.

24) Drive 100 meters and turn left.

25) Drive130m to the finish line (on the left side of the road).

End point: Yuci ancient town

How far is the driving route from Luoshan Expressway to Ji Ye Expressway? The whole journey is about 149.438+0 km.

Starting point: luoshan county.

1. Xinyang driving plan

1) Start from the starting point to the west, drive along Administrative Avenue 100 meters, and turn around and enter Administrative Avenue.

2) Drive along Administrative Avenue for 350 meters, pass Yaxing Shopping Plaza (Administrative Avenue Store) on the right for about 170 meters, and turn right into Lingshan Avenue.

3) Drive along Lingshan Avenue for 2.9 kilometers and turn left ahead.

4) Drive 830m, turn right slightly in the direction of Guangshan/Hefei, and enter Luoshan overpass.

2. Drive 690 meters along Luoshan overpass and go straight into Shanghai-Shaanxi Expressway.

3. Drive along Shanghai-Shaanxi Expressway 135.3km, at Chenlinzi/Li Ji exit, turn right slightly and get on the ramp.

Drive along the ramp for 570 meters, and then turn right.

5. Lu 'an driving plan

1) Drive for 3.5km, turn left and enter S339.

2) Drive along S339 for 3.3 kilometers and turn left into Minqiang Road.

3) Drive along Minqiang Road for 470 meters and turn left into Shihe Road.

4) Drive along Shihe Road for 390 meters, cross Zhu taoyuan village on the left and turn right.

5) Drive 120m to reach the finish line.

Destination: Ji Ye Town.

How long does it take to drive from Fuji Expressway to Fujian? Driving route: the whole journey is about 4 16.8km/4 hours and 58 minutes.

Starting point: Fuji Expressway

1. Fuzhou driving plan

1) Start from the starting point to the west, drive along the ramp 1.0km, and go straight into Jiguang Expressway.

2) Drive along Jiguang Expressway for 2.3km, get off at Gaotian/Shazhou exit, turn right slightly and enter Zixi overpass.

3) Drive along Zixi overpass 1.8km and go straight into Jiguang Expressway.

4) Drive along Jiguang Expressway 1.9 km, and turn right slightly in the direction of S46/ Shaowu/Zixi/Nanping.

2. Drive along the ramp for 470 meters and go straight into Fuji Expressway.

3. Drive along Fuji Expressway for 38.0km and go straight into Huashan Street Tunnel.

4. Drive along Huashan Street Tunnel1.8km and go straight into Ningguang Expressway.

5. Drive along Ningguang Expressway for 64.3km, go to Wuyishan /S03 1 1/ Pucheng/Nanping, turn right slightly and get on the ramp.

6. Drive along the ramp 1.3km and go straight into Pujian Expressway.

7. Drive along Pujian Expressway for 55.7 kilometers, drive to Shang Ning Expressway /G 15 14/G3/ Jingtai Expressway, turn right slightly and enter Xiaba Hub Interchange.

8. Go 880m along Xiaba Junction Interchange and go straight into Shang Ning Expressway.

9. Drive 8.7 kilometers along Shang Ning Expressway and go straight on the ramp.

10. Drive along the ramp for 690 meters and go straight into Beijing-Taiwan Expressway.

1 1. Drive along Jingtai Expressway for 2 19.9 km, then turn right slightly and get on the ramp.

12. Drive along the ramp 1.3km and go straight into Fuzhou Ring Expressway.

13. Internal drive scheme

1) Drive along Fuzhou Ring Expressway for 9.8km and go straight into the Third Ring Expressway.

2) Drive along the Third Ring Road for 3.7 kilometers, at the exit of Wu Si Road/Fuzhou/Guling, turn right slightly and get on the ramp.

3) Drive along the ramp for 430m, turn right and enter Wu Si Road.

4) Drive along Wu Si Road for 2.0km and turn right into Hualin Road.

5) Drive along Hualin Road for 980m.

6) Drive 40 meters to the finish line (on the left side of the road).

End point: Fujian Province

How far is it from Xinmi to Lingbao? How long does the expressway take? It will take about 3-4 hours.

Driving route: the whole journey is about 294.0 kilometers.

Starting point: xinmi city.

1. xinmi city internal drive scheme

1) Start from the east of the starting point, drive along Qingping Street for 200 meters, cross the Mediterranean business on the left for about 270 meters, and then turn right into Beimi New Road.

2) Drive along Beimi New Road for 320 meters and turn left into East Street.

3) Drive along East Street for 990 meters and go straight into the roundabout.

4) Drive around the island for 90 meters, take the third exit, turn right ahead and enter Mizhou Avenue.

5) Drive along Mizhou Avenue for 3.2km and turn right slightly.

6) Drive 450 meters, turn left and drive in the direction of Shaolin Temple.

2. Drive 6 10 meters, at the entrance, and enter S85.

3. Drive along S85 for 9 1. 1 km, and then go straight into G36.

4. Drive along G36 for 36.9 kilometers and turn left slightly in the direction of Sanmenxia /Xi 'an.

5. Drive 1.3km, cross Pangou Bridge and enter G30 at the entrance.

6. Drive along G30139.8km and get off at Lingbao /G209/ Lushi Exit.

7. Drive 1.0km and go straight on the ramp.

8. lingbao city internal drive scheme

1) Drive along the ramp for 440 meters, cross Nangou for about 50 meters, and go straight to the bridge.

2) Drive along the bridge for 620 meters and go straight under the bridge.

3) Drive along the bridge for 350 meters and go straight into X007.

4) Drive along X0071.2km, turn right slightly and enter Ling Han Road.

5) Drive along Ling Han Road10.6km and turn left.

6) Drive 300 meters and go straight into the roundabout.

7) Drive around the island 1.3km, take the fourth exit and turn right into Hangu Avenue.

8) Drive along Hangu Avenue for 950m, turn left and enter G3 10.

9) Drive along G3 10 for 770 meters and turn right into Yinxi Road.

10) Drive along Yinxi Road for 880m, turn right ahead and enter the roundabout.

1 1) Drive around the island for 30 meters, take the 1 exit, turn right ahead and enter Jincheng Avenue.

12) Drive along Jincheng Avenue for 290 meters and reach the destination (on the right side of the road).

End point: Lingbao City mace is afraid of harm.

How long does it take to drive from Xianghe Expressway to Tiantongyuan in Changping? It's about 72 kilometers, and the driving time is about 1 hour (if there is no traffic jam).

Driving route: The whole journey is about 7 1.9 km.

Starting point: Xianghe toll gate

1. Langfang driving plan

1) Start from the starting point to the west, drive along the ramp for 40 meters and go straight.

2) Drive 70 meters and turn around.

3) Drive 40 meters towards Beijing, turn right slightly and get on the ramp.

2. Drive along the ramp for 930 meters and go straight into Jingha Expressway.

3. Drive along Jingha Expressway for 40.0km, cross Dougezhuang Bridge, head for East Fifth Ring Road/Beijing-Tianjin Expressway/Jingtong Expressway, turn right slightly and enter Wu Fang Bridge.

4. Drive along Wu Fang Bridge for 820 meters and go straight into East Fifth Ring Road.

5. Beijing City Driving Plan

1) Drive along the East Fifth Ring Road 14.5km, cross the North Ring Railway Bridge, head for Jingcheng Expressway, turn right slightly and enter the North Fifth Ring Road.

2) Drive along the North Fifth Ring Road for 6.5 kilometers and go straight into the North Fifth Ring Road.

3) Drive along the North Fifth Ring Road for 380m, exit at beiyuan road/Tiantongyuan/Anli Road/Aolin East Road, turn left slightly and enter Laiguangying West Road.

4) Drive along Laiguangying West Road 1.4km, cross Beiyuan Bridge, head for lishuiqiao, and turn right into beiyuan road Auxiliary Road.

5) Drive along beiyuan road side road for 390 meters and turn left ahead.

6) Drive for 20 meters, turn right ahead and enter beiyuan road.

7) Drive along beiyuan road 1.6km, cross the new city square on the right (west of Beike Venture Building) for about 130m, then turn right on the ramp and drive towards Litang Road/Xiaotangshan.

8) Drive along the ramp for 560m and turn right into Anli Road.

9) Drive along Anli Road for 720 meters and go straight into Litang Road.

10) Drive along Litang Road 3. 1km, turn around and enter Litang Road auxiliary road.

1 1) Drive along the auxiliary road of Litang Road for 480m and reach the finish line.

End point: Tiantongyuan

How far is it from Jining to Lianyungang? How long does it take to take the expressway? 320, 3-4 hours

How far is Xiangcheng Expressway from Taicang Expressway? Driving route: the whole journey is about 58.9 kilometers.

Starting point: Xiangcheng District

1. Driving plan of Xiangcheng District

1) Depart from the starting point to the south, drive 100m, and turn left into Jiyuan Road.

2) Drive 500 meters along Jiyuan Road and turn left into Chengyang Road.

3) Drive 620 meters along Chengyang Road, cross Xutugang Bridge and turn right into Huayuan Road.

4) Drive along Huayuan Road for 890 meters, turn left and enter S227.

5) Drive 400 meters along S227, turn left slightly and get on the ramp.

6) Drive 30 meters along the ramp, cross Zhongjing Bridge, turn right ahead and enter the elevated Suzhou North Station.

7) Drive along the elevated road of Suzhou North Railway Station 1.6km, cross Litanghe Bridge, and get off at Fuyuan Road/Taiyang Road /G 15W/ Beijing-Shanghai high-speed railway Suzhou North Railway Station exit, then turn right slightly and get on the ramp.

8) Drive along the ramp for 30 meters, turn left and enter S227.

9) Drive along S227 for 970 meters and turn right into Sun Road.

10) Drive along Taiyang Road 1. 1 km, and go straight on the ramp.

1 1) Drive along the ramp 1.0km and go straight into Changtai Expressway.

12) Drive along Changtai Expressway 12.3km, cross Wangxingcun Bridge, head for Shipai/Taicang /S48/ Taicang Port, turn right slightly and enter Xiangcheng Hub.

2. Drive along Xiangcheng Hub 1.6km, cross Xiangcheng Hub, and go straight into the north line around the city.

3. Drive along the North Ring Road 29. 1km, cross the Wu Tang River Bridge, exit Taicang/Shuangfeng /G204, and turn right slightly on the ramp.

4. Drive along the ramp for 70 meters, cross the expressway and bridge about 1.2km, and go straight into G204.

5. Taicang City Driving Plan

1) Drive along G204 for 4.6 kilometers and go straight into Hu Yi Expressway.

2) Drive along Hu Yi Highway 1. 1 km, and turn left into Xianfu West Street.

3) Drive along Xianfu West Street 1.3km, cross the left Grain Trade Building and go straight into Xianfu Street.

4) Drive along Xianfu Street150m, pass Yin Ge Building on the left for about110m, and reach the destination.

End point: Taicang City