How to get from Yueqing Hongqiao to Longyou Shi Liping? urgent

Driving route: the whole journey is about 284.5 kilometers.

Starting point: Yueqing Hongqiao Vocational and Technical College ...

1. Yueqing driving plan

1) Start from the starting point to the southwest, drive along Tongxian Road for 450 meters, cross the new bridge and turn right into Xinshi Street.

2) Drive along Xinshi Street for 490 meters and go straight into Hongdan Road.

3) Drive along Hongdan Road for 2.8km, drive towards Sidu/Agate, and go straight into the roundabout.

4) Drive around the island for 60 meters, take the second exit, turn right ahead and enter Hongsan Line.

5) Drive for 6.8km along the Hongsan Line, turn right ahead and enter the roundabout.

2. Drive around the island for 30 meters, take the 1 exit, and go straight into Hongsan Line.

3. Drive for 3 1.3km along the Hong 3rd Line, turn left and enter Zhikou Bridge.

4. Drive 80 meters along Zhikou Bridge, cross Zhikou Bridge and go straight into the Red Third Line.

5. Drive along Hongsan Line 1. 1 km and turn left.

6. Drive150m, and then turn left.

7. Drive for 340 meters and turn right slightly towards Hangzhou.

8. Drive 480m, at the entrance, and enter S26.

9. Drive along S26 for 75.9 kilometers, head for Jinhua/Taizhou /S28, turn right slightly and enter Baita Hub.

10. Drive along Baita Hub for 280m, turn left slightly in the direction of Jinyun/Jinhua, and enter Baita Hub.

1 1. Drive 830m along Baita Hub, cross Baita Hub and enter S28 at the entrance.

12. Drive along S28 for 55. 1 km, drive in the direction of Jinhua /G25 (north), turn right slightly and enter Cang Qian Hub.

13. Drive along the center of Cang Qian for 6 10 meters, pass through the center of Cang Qian, and enter G25 at the entrance.

14. Drive along G25 for 58.0km, cross Miantang overpass, turn right slightly in the direction of Quzhou /G60 (west) and enter Jinhua East Hub.

15. Drive along Jinhua East Hub for 1.0 km, cross Jinhua East Hub and enter G60 at the entrance.

16. Drive along G60 for 34.5km and take Tangxi/Jinhua West Exit.

17. Drive 8 10 meters and turn right slightly in the direction of Luobu/Yangbu/Quzhou.

18. Driving plan of Longyou County

1) Drive 50 meters, turn right ahead, and get off the Baitang line.

2) Leave Baitang Line for 200m, pass through Shi Sanyue140m, turn left and enter S3 15.

3) Follow S3 15 for 9. 1km, turn left and enter Shanghai-Yuan Line.

4) Drive along the Shanghai-Yuan line for 3.3km, turn right ahead and enter the roundabout.

5) Drive around the island for 40 meters, take the second exit, turn right ahead and enter the Shanghai-Yuan line.

6) Drive 470 meters along the Shanghai-Yuan line and reach the destination (on the right side of the road).

Destination: Shi Liping Postal Savings Office.