What is the main work of the engineering quality inspection station?

What is the main work of the engineering quality inspection station? Basically, it is the following work.

1. Strictly implement various national safety and fire protection regulations and detailed rules for implementation, and implement the company's fire protection and safety production management regulations at the project site. Assist the project manager to do a good job in construction site safety, conscientiously implement the policy of "safe production" and "prevention first", and strictly implement the safety standards for building construction and the technical specifications for on-site safety of construction teams.

2. Seriously implement the company's "Safe and Civilized Construction Measures", strengthen the patrol inspection of the construction site, and ensure the safety of personnel and materials entering the construction site. If unsafe factors are found, they should be reported in advance and active measures should be taken.

3, adhere to the principle, seriously in accordance with the relevant provisions of the superior and the company, bold precedent supervision and inspection authority, dare to stop illegal command, have the right to stop illegal operations.

4. Participate in production meetings and technical disclosure, review the construction organization design and safety technical measures plan, and put forward safety work requirements according to the construction situation.

5. Pay attention to safety and fire prevention, especially the safety management of inflammable and explosive articles and the safe operation procedures of electrical appliances, establish a fire control system, check it regularly and make records.

6, strengthen the safety management of the construction site, enter the site must wear a helmet, set up safety warning signs and safety technical operation procedures.

7, enter the site construction personnel, shall not be drunk mount guard, shall not fight, theft, smoking is not allowed in the construction site.

8, security personnel, vehicle documents in and out of the scope of construction, items must go out with the door, strengthen the patrol of security personnel, eliminate the hidden dangers of accidents.

What is the main job of MIS engineer? MIS textbook

The so-called MIS (Management Information System) system is composed of people, computers and other peripheral devices, which can collect, transmit, store, process, maintain and use information. It is a new science, and its main task is to make full use of modern computer and network communication technology to strengthen enterprise information management. Through the investigation and understanding of the human, material, financial, equipment, technology and other resources owned by the enterprise, the correct data are established, processed into various information materials and provided to managers in time, so as to make correct decisions and continuously improve the management level and economic benefits of the enterprise. At present, enterprise computer network has become an important means for enterprises to carry out technological transformation and improve management level. With the integration of China and the world information superhighway, the information obtained by enterprises through computer networks will bring huge economic and social benefits to enterprises, and the office and management of enterprises will develop in an efficient, fast and paperless direction. MIS system is usually used for system decision. For example, it can be used to find the problems that need to be solved urgently and feed back the information to the upper management in time, so that they can know the progress or deficiency of the current work. In other words, the ultimate goal of MIS system is to let managers know the current situation of the company in time and grasp the future development path. A complete MIS should include: decision support system (DSS), industrial control system (IPC), office automation system (OA), database, model base, method base, knowledge base and interface for exchanging information with superior departments and the outside world. Among them, especially the office automation system (OA) and the information exchange with the superior departments and the outside world are inseparable from the application of Intra. It can be said that modern enterprise MIS is inseparable from Inter, but the establishment of Inter must depend on the system structure and software and hardware environment of MIS. The core of m is is CS (Client/Server-Client/Server) architecture, while the core of MIS based on Inter is BS (Browser/Server-Browser/Server) architecture. BS architecture has great advantages over CS architecture. The traditional MIS system depends on the special operating environment, which means that the operator's activity space is greatly limited. The BS architecture does not need a special running environment. Anywhere, as long as you have access to the Internet, you can operate the MIS system. The difference between good and bad is self-evident. MIS based on Inter MIS system is an extension of traditional MIS system, which can be used not only for high-level decision-making, but also for general business management. Through user's named login (or anonymous login) and corresponding authority control, the system can be browsed, queried, controlled and audited at the remote end. With the expansion of Inter, the existing companies and schools are no longer confined to the physical, tangible and real fields, and the network itself has actually become a development space. The MIS system based on Inter makes up for the shortcomings of the traditional MIS system and fully embodies the characteristics of the modern network era. With the rapid development of Internet technology, the Internet will surely become the technical cornerstone of the new human society. MIS system based on Inter will surely become a new generation of management information system in the network era, and its prospect is extremely optimistic. Marketing management information system Marketing management information system is a part of the whole management information system of an enterprise or organization. MIS is an information system, which collects corresponding information from various related resources (including external and internal) through programmed procedures, and provides functions for managers at all levels, so that they can make timely and effective decisions on various planning, monitoring and control activities that they should be responsible for. This shows that the essence of MIS is a database of internal and external information, which can help managers to analyze, make decisions, plan and set control objectives. So the focus is on how to use this information, not how to form it. Management information system is an effective management tool. The most effective management information system can reflect how external variables change with the passage of time and the change of internal procedures, that is, whether time and internal variables will have an impact on external variables. This establishes a powerful and effective knowledge base, which is helpful for forecasting. Although the establishment and maintenance of MIS is very time-consuming and expensive, it is worthwhile for an organization compared with its potential benefits and the improvement of decision accuracy. Inter provides an ideal tool for establishing and maintaining MIS, which is also an important content of network marketing.

Solved-What is the main job of the test engineer? Yes, the test engineer is relative to the test. But if you have this certificate, you can also work in engineering there. After all, it is also an engineering certificate.

What is the main work of inspection? The main work of inspection is:

1, complete the first inspection, inspection, final inspection and final inspection of process products in time, and make quality records;

2. Timely handle and feedback the product quality problems found in the production process;

3. Take the initiative to understand the problems of process products in other departments and assist relevant departments to solve them;

4. Complete all quality records in time every day, with clear problem description and accurate measurement data;

5. Actively complete the temporary work assigned by the quality supervisor;

6. Responsible for the management of various technical documents, samples and fixtures for product inspection.

Patrol inspection, that is, patrol inspection, is a regular or irregular liquidity inspection in the process of product manufacturing. The purpose is to find quality problems in time.

Patrol inspection is a form of random inspection. Patrol inspection goes deep into the machine for inspection, which requires QC to be familiar with product characteristics, processing technology, assembly and debugging technology and necessary inspections. Tools, fixtures, measuring tools and technical documents, quality record forms, etc. Not only that, but also QC is required to have rich working experience and high technical level, so as to find quality problems in time and then deeply analyze the influence of technology, process equipment and technical operation on product quality.

What is the main job of the International Space Station? The idea of the International Space Station was first put forward by American President Ronald Reagan in 1983, that is, to build the largest manned space station so far on the basis of international cooperation. After nearly ten years of exploration and repeated redesign, the International Space Station was designed and put into operation in 1993 only after the disintegration of the Soviet Union and the participation of Russia.

The space station is dominated by the United States and Russia, including Canada, Japan, Brazil and ESA (1 1 country) *** 16 countries. Its design life is 10~ 15 years, its total mass is about 423 tons, its length is 108 meters, its width is 88 meters (including its wingspan), and its orbital height is 397 kilometers. The atmospheric pressure in the manned cabin is the same as the ground, and it can carry six people.

Its main structure is: (1) foundation truss. Used to install various cabins, solar panels, mobile service systems and off-site exposure test facilities. (2) living quarters. Mainly used for the life and residence of astronauts, including corridors, toilets, showers, sleeping stations and medical facilities, developed by the United States and launched into space. (3) service cabin. It includes scientific instruments, equipment and other service facilities, as well as some residential functions, which were developed and launched by Russia. (4) Functional cargo hold. It is equipped with life support facilities for astronauts and some living functions (such as toilets and sanitary facilities). ), as well as power supply, fuel storage, etc. There is a multi-directional docking interface outside the cabin, which was developed and launched by Russia. (5) Multiple experimental cabins. Among them, the United States 1, ESA 1, Japan 1, and Russia 3. The three experimental modules of the United States, Japan and ESA will provide a total of 33 international standard payload modules; There are also 20 experimental cabinets in the Russian experimental cabin. In addition, Japan's experimental cabin is also connected with an off-site exposure platform for direct contact with the space environment. (6) Three node cabins. They are jointly developed by the United States and ESA, and are channels connecting the cabin and the hatch for astronauts to carry out extravehicular activities. In addition, the node 1 cabin can also be stored as a warehouse; Node's No.2 cabin has a circuit regulating cabinet, which is used to convert electric energy for international partners. Node 3 module leaves room for the expansion of the space station. (7) Energy system and solar cell windsurfing. They are provided by the United States and Russia. (8) Mobile service system. It was developed in Canada.

During the assembly phase, the main facilities of the International Space Station were launched and transported by Russian Proton rocket, ESA Ariane 5 rocket and American space shuttle. After the assembly, the transportation work is completed by the American space shuttle, the Russian Federation -TM spacecraft and the progressive cargo spacecraft. The United States also plans to develop a life-saving spacecraft with lift to participate in this work.

By July 2000, three modules of the International Space Station had been sent into space, namely, the functional cargo module provided by Russia, the service module and the Node 1 module provided by the United States. According to the plan, the remote control manipulator made in Canada, the central truss and node 2 module in the United States, the experimental module and exposed platform outside the station in Japan, the experimental module of ESA and the residential module in the United States will be launched one after another. If it goes well, it is expected that the assembly task of the whole station will be completed in 2006.

After the successful assembly, the International Space Station will serve as a means of scientific research and development of space resources, providing human beings with opportunities for long-term earth observation and astronomical observation in space orbit.

In terms of earth observation, the International Space Station is superior to remote sensing satellites. First of all, there are people involved in the remote sensing mission, so when there is an earthquake, tsunami or volcanic eruption on the earth, astronauts on the space station can adjust various parameters of the remote sensor in time to obtain the best observation effect; When the remote sensor and other instruments and equipment fail, they can be repaired to normal working condition at any time; Remote sensing instruments and equipment can also be replaced by space shuttle or spacecraft, so that new technologies can be applied in time and funds can be saved. Using it to monitor the quality of the earth's atmosphere can predict climate change for a long time. It will also benefit from the development of land resources and the utilization of marine resources. The international space station is much superior to other spacecraft in astronomical observation, and it is an important means to understand the position, distribution, motion structure, physical state, chemical composition and its evolution law of the universe. Due to the participation of personnel in observation, the space station's position and multidirectional activities in space, and the mobile observation and determination methods, the functions of instruments and equipment can be fully exerted. Through the International Space Station, astronomers can not only obtain important information such as cosmic rays, subatomic particles, and understand the mysteries of the universe, but also respond quickly to astronomical events (such as solar flares, dark stripes, etc.) that affect the earth's environment and protect the spacecraft and its members flying in space in time.

Life science research on the International Space Station can be divided into two aspects: human life and gravity biology. The research results of human life science can directly promote the development of space medicine. For example, judging the influence of gravity on astronauts' bodies through various parameters can improve the research level of human brain, nerves, bones and muscles. The research and application of gravity biology and materials science have broad prospects. The microgravity conditions of the International Space Station are much superior to those of the Mir Space Station and the Space Shuttle, especially in the development of materials.

As far as the special factor of space microgravity is concerned, the International Space Station can provide superior conditions for studying life science, biotechnology, space medicine, materials science, fluid physics, combustion science, etc., which are much better than those on earth, and even cannot be provided on earth, which directly promotes the progress of these sciences. At the same time, the completion and application of the International Space Station is a step closer to the long-term goal of manned spaceflight, such as building space factories, space power stations, conducting space tourism, establishing permanent residential areas (space castles) and emigrating to other planets in space.

What is the main job of the after-sales engineer? After-sales service and technical personnel belong to the same level.

What is the main job of a mold engineer? Mold engineers are experts in mold design, manufacture, adjustment and use of special machine tools, adjustment and use of special tools, and selection and treatment of mold materials. They can solve all mold design, technology, tools, materials and treatment.

The main work of the mold engineer is:

1. Make a modeling plan for project implementation;

2. Design and draw the product drawings of the sub-bureau and the assembly drawings of mould parts;

3. Design and compile the mold processing technology to solve the mechanical processing technology problems in production;

4, new products, new technology design mold technology development work;

5. Inductive management of drawings and technical data.

What is the main job of quality inspector for aluminum alloy doors and windows? There are two major points to solve the responsibility of door and window quality inspectors. First, the production process and ex-factory inspection of products. Second: quality inspection of engineering installation. First: product production process and ex-factory inspection. Including the inspection of materials, whether the materials meet the requirements. Such as whether the wall thickness and length of the material meet the requirements. Material purchase orders and incoming materials should be inspected in detail. In the production process, it is mainly to check whether the workers produce according to the working procedure, whether there is material size error and whether the cutting angle meets the requirements. It will be clear on the process sheet whether it is 45 degrees or 90 degrees or a special angle. Whether the assembly clearance is well controlled and whether the 45-degree angle is straight. Whether to drill holes and mill tenons as required. Install the necessary accessories. It should be reminded that there is no wall on the frame of the workshop, so it is meaningless for inspectors to measure diagonal lines. Check whether the package is in good condition before leaving the factory. Certificate of approval, label. The window frame should indicate the position, etc. After arriving at the construction site, after the window frame installation is completed, be sure to check whether the window frame is vertical and whether the diagonal of the window frame is equal. Is the seam between the sashes as wide as the lower position? Whether the gap is big or small is incorrect. After the casement window or door is hung, check whether the lap joint between the two sides and the frame is consistent, and whether the lap joint is consistent after closing. In some special cases, due to hardware reasons, the overlap between the left and right sides may be inconsistent, which should be normal, but it should be consistent from top to bottom. At the same time, after closing, from the front, there should be no light leakage.