What is the operation method of printing die cutting machine?

Operating method of the printing die-cutting machine: \x0d\ (1) operating instructions before starting \x0d\ 1. Check the handover record to understand the equipment operation \x0d\2. Check the number of die-cutting and product quality according to the production scheduling plan and the requirements of production and construction orders. \x0d\3。 After checking and confirming that there are no foreign objects on the machine, thoroughly check and adjust the machine. \x0d\ (II) Operating specifications before production \x0d\ 1. Check whether the die cutting is the same size as the box sample \x0d\2. Check whether the product has a mouth. Select the bottom template material \x0d\4 according to the product quantity, paper type and carton structure. Install the die-cutting board and lock the screws tightly. Make a bottom template, the thickness of which is equal to the paper thickness of die-cutting products \x0d\5. Install the bottom template, clean the surface impurities and lock \x0d\6. Adjust the die-cutting pressure according to the paper thickness, and gradually increase the pressure from light to heavy to 80% penetration, otherwise the equipment will be damaged. Adjust the position of the upper and lower ejector pins of the paper stripping part and lock x0d. \x0d\ (3) Operating specifications in production \x0d\ 1. Work according to the production requirements and sample signing standards of construction orders. \x0d\2。 In the production process, sampling inspection shall be conducted every 5- 10 minutes, and the quality problems shall be reported in time, and the production can be continued only after they are solved. \x0d\3。 After each version of die-cutting, it is necessary to conduct a comprehensive inspection and fill in the die-cutting process sheet. If there are any quality problems, the products should be placed separately in time and the abnormal product flow chart should be filled in. \x0d\4。 If material problems are found, production should be stopped, and the Feedback Sheet of Poor Quality of Production Materials should be filled in, so that relevant departments can coordinate and solve them and prepare for subsequent production. \x0d\ (4) Operation specification after production \x0d\ 1. The team leader shall fill in the Daily Report of Collision and Cutting, the Statistical Table of Process Quality and the Daily Checklist of Production Equipment every day. \x0d\2。 Divide the die-cut products into qualified products and defective products and clearly identify them. \x0d\3。 At the end of production, the equipment should stop at the mold opening position. \x0d\4。 Maintain the equipment according to the daily maintenance content. \x0d\5。 Fill in the handover record carefully. 6. Turn off the power. \x0d\