Matters needing attention in installation of quartz stone countertop

Before installation, you need to check the flatness of the cabinet, and check whether the size of the quartz stone countertop matches the cabinet completely. If there is any error, it is necessary to rework the quartz stone countertop or trim the cabinet.

Measure size

When measuring the depth of the cabinet, the size of 4cm should be reserved on the countertop to facilitate the installation of the lower hanging edge strip.

Use the retaining clip.

When splicing some super-long countertops (such as L-shaped countertops), in order to ensure the flatness of the spliced countertops and the tightness of the joints, it is suggested to use firm fixing clips (A clip and F clip) to fix quartz stone plates. In addition, when bonding the lower hanging strip, it should also be fixed with a strong fixing clip, so as to ensure the perfect combination of the stitching of the desktop and the gap between the desktop and the lower hanging strip.

Leave a gap

There should be a certain distance between the quartz stone countertop and the wall (generally 3mm to 5mm). After installation, glass glue should be evenly applied to the gap between the countertop and the wall.

Avoid cutting

When installing the countertop, it is necessary to avoid cutting and drilling quartz stone on a large scale in the construction site, on the one hand, to prevent cutting dust from polluting the construction site, on the other hand, to prevent errors caused by inaccurate cutting.

Contact a professional master

Due to the high hardness and density of quartz stone table top, the processing technology requirements are high. Therefore, when installing the quartz stone countertop, you should contact a professional quartz stone installation master and use professional tools for installation. Be sure not to install it blindly, so as not to cause unnecessary trouble.