Job responsibilities of steel rolling

With the gradual development of society, people use job responsibilities more and more, and formulating job responsibilities can reduce illegal acts and accidents. How to formulate job responsibilities? The following are the job responsibilities of steel rolling that I collected for you, for reference only. Welcome to read.

Rolling Steel 1 Job Description: Working in industrial materials is preferred.

Formulate the process plan of variety steel, and write the post work instruction of steel rolling production process;

Manage and give technical guidance to the steel rolling production process, and deal with all kinds of process accidents in the steel rolling production process;

Track the quality of steel varieties and solve quality and technical problems;

Analyze product quality and product failure;

Solve the problems related to metal materials in the research and development of variety steel;

The key economic and technical indexes of steel rolling are analyzed, and the improvement measures are put forward to continuously improve the indexes.

Requirements:

Rich theoretical knowledge of metal materials, strong understanding of steel structure transformation control; Familiar with steel rolling production process; Rolling engineers are the front-line personnel in steel production. Going deep into the workshop is tiring and dangerous, so most of the requirements are under 45. However, those who have many years of practical experience in steel rolling production technology or production management experience and strong organizational ability should be appropriately relaxed.

Job responsibilities of steel rolling 2 1. Purpose:

In order to further strengthen the safety management of rolling mills, strengthen safety management, implement responsibilities, and effectively curb the occurrence of serious accidents, these responsibilities are formulated.

2. Scope of application:

This responsibility is applicable to related posts in rolling mills.

3. Post safety responsibilities

3. 1. The factory director's responsibility for production safety

3. 1. 1. Take full responsibility for the safety production of the unit, and carry out the instructions and various rules and regulations of the superior on safety production.

3. 1.2. While planning, arranging, inspecting, summarizing and assessing the production work, plan, arrange, inspect and assess the safety production work.

3. 1.3. Organize, lead and implement various labor protection rules and regulations and safety operation procedures, and carry them out.

3. 1.4. At the production dispatching meeting, we often supervise the work of safety in production and analyze the situation of safety in production in our unit.

3. 1.5. Organize leaders to conduct regular safety inspections and safety education, and find and solve problems and hidden dangers in this respect in time.

3. 1.6. Supervise the steel rolling mill to investigate and handle the accident according to the "four don't let go" and be responsible for the correctness of the statistical report.

3. 1.7. Other safety production duties as stipulated by laws and regulations.

3.2. The factory director's safety production responsibilities

3.2. 1. Grasp the work of safety production in an all-round way, and take specific leadership responsibility for the safety production of the rolling mill.

3.2.2. Organize and lead safety inspection, implement rectification measures, and solve unsafe problems in production in time.

3.2.3. Responsible for implementing the "three simultaneities" regulations, reporting to local authorities in time, and organizing the "three simultaneities" review.

3.2.4. Be responsible for approving the employee safety education and training work plan and ensuring its implementation.

3.2.5. Be responsible for safety technology research, solve major problems in safety production in a planned way, be responsible for process design and review of safety production projects, and solve relevant safety problems in production and construction.

3.2.6. Be responsible for organizing the formulation of safe operation methods and procedures for new products and new processes. Before trial production, all safety measures should be taken and labor protection guidance should be given.

3.2.7. When considering long-term planning, it should include safety technology research, projects to improve working conditions and safe and civilized production.

3.2.8. The preparation or revision of process regulations, operation regulations, post operation methods and process conditions must meet the requirements of safe production.

3.3. Safety production responsibilities of the equipment factory director

3.3. 1. Take the leadership responsibility for the normal use of equipment and facilities in the rolling mill.

3.3.2. Be responsible for organizing the examination and approval of major and medium repair plans for steel rolling equipment, and not approving those with imperfect safety measures.

3.3.3. Formulate or review relevant equipment manufacturing and transformation plans, organize the preparation of overhaul safety protection measures plans, and ensure their implementation.

3.3.4. Be responsible for the management of machinery, electrical appliances, instruments, equipment, process pipelines, ventilation and exhaust devices, industrial buildings and structures, so that they are always in good condition.

3.3.5. Compile the maintenance procedures and relevant rules and regulations of the general equipment of this unit, and supervise and inspect the implementation.

3.3.6. Ensure the safe operation of the equipment and check its usage. During maintenance, appropriate safety measures must be taken, and maintenance personnel should be organized to carry out safety operation education and on-site monitoring. After maintenance, be responsible for the quality of maintenance to ensure safe operation.

3.4. The production and operation manager's safety production responsibilities

3.4. 1 Be fully responsible for the safety work in the operation area.

3.4.2. Seriously implement the laws, regulations and rules and regulations on production safety, and earnestly do a good job in production safety.

3.4.3. Organize safety inspection, formulate and organize the implementation of the unit's work plan for production safety, and eliminate unsafe factors in time.

3.4.4. Conduct safety education in the work area for new workers and conduct safety education for employees on a regular basis.

3.4.5. Under the leadership of the superior, formulate the safety operation rules for each type of work, check the implementation of safety rules and regulations, and ensure that the process, tools and equipment meet the safety requirements.

3.4.6 Lead the work of safety personnel in the operation area and shift, organize safety production competitions, summarize and promote safety production experience, and commend good deeds.

3.4.7. Take the leadership responsibility for the "6S" management in the operation area.

3.4.8. Deal with the accident in strict accordance with the principle of "four misses" (the cause of the accident is unclear, the person responsible for the accident and the masses are not educated, the person responsible for the accident does not handle it, and the preventive measures are not missed).

3.5. Production safety responsibilities of the deputy production manager

3.5. 1. Assist the director to maintain the normal operation of daily work in the operation area.

3.5.2. Take the lead in compiling the safety post responsibilities, post safety operation procedures and relevant supplementary documents in this operation area.

3.5.3. The leader is responsible for compiling and reviewing the relevant technical operation procedures of the department, and revising and updating them in time.

3.5.4. Strictly implement various safety rules and regulations, organize safety and site management inspection, and organize process discipline inspection. Participate in the implementation of emergency measures for emergencies.

3.5.5. Summarize the good experience of popularizing safety production, conscientiously implement the "five simultaneities" of safety production, and strive to eliminate unsafe factors in production, technology and equipment.

3.5.6. Assist the director to pay special attention to the safety work in charge of the scope and be responsible for the safety work in charge of the scope.

3.5.7. Hold regular safety activities and meetings, and conduct regular safety education for employees.

3.5.8. Assist the director to implement the rectification of nonconformities and potential safety hazards.

3.6. Comprehensive section chief's safety production responsibilities

3.6. 1. New workers should be taken to the safety production department for safety education, and those who have not received safety education or failed in education are not allowed to be assigned to the operation area.

3.6.2. New workers should do a good job of physical examination before entering the production post, and the relevant regulations on occupational contraindications and protection of female workers should be implemented when deploying.

3.6.3. Strictly control overtime, pay attention to the combination of work and rest, and cooperate with relevant departments to mobilize employees with occupational contraindications.

3.6.4. The arrangement of operators in important positions and key positions should be relatively stable, and the requirements for the political, technical and health status of operators in this position should be considered when deploying new workers.

3.6.5. Safety in production should be one of the assessment contents when employees are promoted and rewarded.

3.6.6. When organizing assessment and promoting cadres, we should take the implementation of the safety production policy as the assessment responsibility.

3.6.7. Responsible for the aftermath of work-related injuries and the wages of casualties.

3.7. Safety production responsibilities of dispatching supervisor

3.7. 1. Assist the factory director to maintain the normal operation of safety production in the rolling mill and participate in site management and safety inspection.

3.7.2. Participate in the preparation of safety post responsibilities, relevant technical operation procedures and supplementary documents of this position.

3.7.3. Participate in identifying the on-site risk factors of the department and formulate the safety management plan.

3.7.4. Lead the dispatcher to organize and coordinate daily safety production, stop illegal activities in production, and put forward new potential safety hazards in time. Strictly implement various safety rules and regulations and environmental protection rules and regulations, and participate in the implementation of emergency measures.

3.7.5. Be responsible for the consumption management of billet raw materials, scrap metal materials and scales in this department. 3.7.6. Assist the director to implement the rectification of nonconformities and potential safety hazards.

3.7.7. Summarize the good experience of popularizing safety production, conscientiously implement the "five simultaneities" of safety production, and strive to eliminate unsafe factors in production, technology and equipment.

3.8. The dispatcher's safety production responsibilities

3.8. 1. Assist the scheduling supervisor to maintain the normal operation of the daily work of the production department.

3.8.2. Be responsible for organizing and coordinating the safety production during the shift, stopping the illegal behaviors in production, and putting forward new potential safety hazards in time. Strictly implement various safety rules and regulations and participate in the implementation of emergency measures.

3.8.3. When arranging production tasks, arrange safety precautions at the same time. When conducting on-site command, be responsible for controlling the on-site security situation. Have the right to refuse to perform tasks without security.

3.8.4. When production is abnormal, the following measures should be taken to ensure safety and avoid abnormal consumption of resources:

First, slow down the production speed;

B, require relevant department managers and technicians to be present for processing;

C. report to the dispatching supervisor and department supervisor;

D, report the total scheduling request coordination processing.

3.8.5. Assist the dispatching supervisor to manage the consumption of billet raw materials, scrap metal materials, mill scale and gas in this department.

3.8.6. Summarize the good experience of popularizing safety production, conscientiously implement the "five simultaneities" of safety production, and strive to eliminate production, technology and equipment.

Job responsibilities of steel rolling 3. Job responsibilities of the office

1. Director: Responsible for the implementation of the quality, safety and environment management policies, management objectives and factory-related systems promulgated by the company in this unit. Responsible for the greening management of the whole plant.

2. Promoter: responsible for the supervision of the factory department, the printing service of the whole factory, and the management of the propaganda work of the whole factory.

3. Clerk: responsible for the management of family planning work of female employees in the factory. Responsible for the issuance, recovery and failure management of documents.

Second, the equipment safety responsibility

1. section chief: responsible for the implementation of the quality, safety, environment and other management policies, management objectives and factory-related systems promulgated by the company in this unit. Responsible for the management of equipment, safety, environment, monitoring and measuring equipment.

2. Deputy Chief: responsible for organizing the formulation, revision and implementation of the three major regulations for equipment. Responsible for the management of equipment, safety, environment, monitoring and measuring equipment.

3. Equipment technician: responsible for the control and management of production equipment, as well as the management of equipment accidents and failures.

4. Spare parts clerk: responsible for the management of equipment, spare parts and fixed assets.

5. Clerk: Responsible for the management of technical drawings.

6, security officer; Responsible for safety and environmental management of production line.

III. Job Responsibilities of the Technology Department

1, section chief; Be responsible for the implementation of the quality, safety and environmental management policies, management objectives and factory-related systems promulgated by the company in this unit, and be responsible for the overall work of process management, quality management system operation management and spare parts management.

2. Vice President: Responsible for the technical management, spare parts management and operation management of quality management system of rod and wire, high-speed wire and rod and wire winding.

3. Artisans; Responsible for the collection and arrangement of on-site process parameter data of bar wire, high-speed wire and bar winding and process technology management.

4. Clerk: operation management of quality management system, housekeeping and attendance management of technical department, procurement, acceptance and management of spare parts.

IV. Responsibilities of the Finance Department

1, section chief; Be responsible for the overall work of this department, and the implementation of the quality, safety and environmental management policies, management objectives and factory-related systems promulgated by the company in this unit.

2. Cost accounting: responsible for the cost accounting of the three lines, the supervision and assessment of the cost accounting system, the registration of self-purchase contracts, the receipt and delivery of invoices, and the handling of payment procedures.

3. Personnel: responsible for the education and training of on-the-job employees, the issuance of workers' technical grade certificates and qualification certificates, the filing and storage of training materials, and the distribution and management of general managers and professional and technical personnel.

4. Cashier: responsible for the management of factory cash accounts, the management of employees' share capital and the distribution of dividends, the establishment and handling of employee loan procedures, the transfer of current account procedures of the finance department and the preparation of factory cash balance.

Five, the operation department job responsibilities

1. Director: responsible for the overall work of the dispatching room, and the implementation of the management policies, management objectives and factory-related systems promulgated by the company in this unit.

2. Deputy Director: Responsible for the on-site dispatching management of high-speed wire rod winding and rod wire respectively.

3. Statistician: responsible for sorting, counting, reporting and paperwork of various reports in the rolling mill.

4. On-site administrator: responsible for the management of the third-line 5s.

5. Duty shift supervisor: responsible for organizing and coordinating the on-site production of high-speed wire rod, bar winding and bar wire rod respectively, and familiar with the hazards and environmental factors of this position.

6. Dispatcher: responsible for the field production records and information transmission of high-speed wire rod, wire rod winding and wire rod respectively, and familiar with the hazards and environmental factors of this position.

Six, high rolling workshop job responsibilities

1, workshop director: lead all staff in the workshop to complete various production tasks assigned by the company and the factory department; Do a good job in the management of workshop production, technical transformation, quality, safety and environmental protection, and do a good job in the management of workshop personnel and materials; Timely convey the work requirements of superiors and the spirit of meetings and documents, do a good job in training workshop staff and bring a good team of workshop staff; Complete other temporary or mandatory tasks assigned by relevant leaders in time.

2. Deputy Director: responsible for all work in the heating furnace area; Responsible for all the work in the rolling area; Assist Director Gao in charge of all the work in the steel rolling area and be responsible for the safety and health work.

3. Technician: responsible for technical management of the workshop; Responsible for the operation of quality system; Responsible for 5S management; Responsible for quality control.

4. Heating furnace supervisor: responsible for all the work of the heating furnace; Workshop safety work; Measuring tool certification and workshop-related outsourcing work

5. Clerk: responsible for bonus calculation, salary creation, daily statistics and labor insurance collection and distribution; Responsible for picking, consumption and cost accounting; Responsible for daily office work and temporary work issued by the branch workshop.

6. Team leader: responsible for the overall work of the team; Responsible for organizing and coordinating the production of the team; Be responsible for the quality system operation, safety and environmental sanitation of the team; Responsible for the management of hazard sources and environmental factors of the team; Responsible for completing other related work or temporary tasks arranged by the branch workshop;

7. Raw material worker: responsible for receiving, distributing and inspecting raw materials; Responsible for the "5S" work in this area; Be responsible for the operation of the post quality system, the establishment and filling of post records; Be responsible for the management of hazards (points) and environmental factors in this position.

8. Steel loader: responsible for the operation and monitoring of steel loader; Responsible for loading steel according to the production plan; Responsible for the "5S" work in this area; Be responsible for the operation of the post quality system, the establishment and filling of post records; Be responsible for the management of hazards (points) and environmental factors in this position.

9. Tapping worker: responsible for the operation and monitoring of tapping equipment; Responsible for tapping operation according to production requirements; negative

Responsible for the "5S" work in this area; Be responsible for the operation of the post quality system, the establishment and filling of post records; Be responsible for the management of hazards (points) and environmental factors in this position.

10. Raw material crane operator: responsible for the use and daily maintenance of the raw material crane; Responsible for discharging raw materials and charging blanks into the furnace according to the production plan; Responsible for whitewashing the end of raw materials; Responsible for the "5S" work in this area; Be responsible for the operation of the post quality system, the establishment and filling of post records; Be responsible for the management of hazards (points) and environmental factors in this position.

1 1. firecrackers: responsible for heating the billet according to the production plan and process requirements; Responsible for spot inspection (patrol) and operation monitoring of related equipment in heating furnace area; Responsible for the "5S" work in this area; Be responsible for the operation of the post quality system, the establishment and filling of post records; Be responsible for the management of hazards (points) and environmental factors in this position.

12. Rough rolling: responsible for setting, monitoring, adjusting and handling process and equipment accidents in this area according to the production plan and process requirements; Responsible for the use, maintenance and replacement of rollers (grooves) and guide rails in this area; Responsible for spot (patrol) inspection and operation monitoring of relevant equipment in this area; Responsible for the "5S" work in this area; Be responsible for the operation of the post quality system, the establishment and filling of post records; Be responsible for the management of hazards (points) and environmental factors in this position.

13, main console, pre-finish rolling and pinch roll: responsible for setting and calling rolling program and modifying related parameters according to production plan and process requirements; Responsible for starting, monitoring and stopping the production process, and responsible for the production and coordination of the team; Responsible for setting, monitoring and adjusting the material shape of the pre-finishing rolling area, handling the process and equipment accidents in this area, maintaining and replacing the pre-finishing roll ring and guide; Responsible for the replacement and adjustment of pinch roller and the setting of related parameters; Set and adjust relevant parameters according to the requirements of controlling cooling process; Responsible for the use, maintenance and calibration of calipers; Responsible for spot (patrol) inspection and operation monitoring of relevant equipment in this area; Responsible for the "5S" work in this area; Be responsible for the operation of the post quality system, the establishment and filling of post records; Be responsible for the management of hazards (points) and environmental factors in this position.

14, finish rolling: responsible for setting, monitoring and adjusting the material shape in the finish rolling area; Responsible for handling the process and equipment in this area.

Prepare for the accident; Responsible for the use, maintenance and replacement of finishing roller rings and guide rails; Responsible for spot (patrol) inspection and operation monitoring of relevant equipment in this area; Responsible for the "5S" work in this area; Be responsible for the operation of the post quality system, the establishment and filling of post records; Be responsible for the management of hazards (points) and environmental factors in this position.

15. Air cooling line: responsible for monitoring the coiled material running on the air cooling roller table; Be responsible for cutting off the big circle at the tail when the specification is small; Responsible for handling process and equipment accidents in this area; Be responsible for straightening the tail according to the process requirements to ensure the beautiful shape of the disc; Responsible for spot (patrol) inspection and operation monitoring of relevant equipment in this area; Responsible for the "5S" work in this area; Be responsible for the operation of the post quality system, the establishment and filling of post records; Be responsible for the management of hazards (points) and environmental factors in this position.

16, CP3: responsible for the start-stop, operation monitoring and control of equipment in this area; Responsible for the centering operation and recording of mandrel; Adjust the opening and air volume of the fan according to the process requirements; Responsible for spot (patrol) inspection and operation monitoring of relevant equipment in this area; Responsible for the "5S" work in this area; Be responsible for the operation of the post quality system, the establishment and filling of post records; Be responsible for the management of hazards (points) and environmental factors in this position.

17, cutting head and tail: responsible for cutting head and tail defects; Responsible for cleaning up the chaotic lines; Responsible for the "5S" work in this area; Be responsible for the management of hazards (points) and environmental factors in this position.

18. Labeling and unreeling: Labeling and unreeling shall be carried out correctly according to process requirements and relevant systems; Responsible for spot (patrol) inspection and operation monitoring of relevant equipment in this area; Responsible for the "5S" work in this area; Be responsible for the management of hazards (points) and environmental factors in this position.

Seven, bar rolling workshop job responsibilities

1, workshop director: responsible for the overall work of the workshop; Responsible for the implementation of the company's three-system policies, objectives and factory-related systems in this unit; Responsible for the formulation, revision and implementation of the three major regulations for equipment in this workshop; Implement factory training plan; Responsible for the management of workshop hazards and environmental factors.

2. Deputy Workshop Director: Assist the director in charge of workshop work and be responsible for the implementation of the company's three-system policies, objectives and factory-related systems in this unit; Responsible for the formulation, revision and implementation of the three major regulations for equipment in this workshop; Implement factory training plan; Responsible for the management of workshop hazards and environmental factors.

Job responsibilities of steel rolling. Job responsibilities of the factory director

1 post function: maintain and improve the production of the rolling mill, and supervise the work of each post on the machinery, electricity and equipment of the whole plant.

Check the process equipment and keep the equipment running well. Produce appropriate quantity and quality of wire and bar.

Responsibilities: According to the company's long-term planning and annual production and operation objectives, combined with the actual situation of our factory, we are committed to improving safety, health and environmental protection, quality, productivity and cost, and cooperate with the company's business policy to achieve the overall goal of the company.

3 Safety, health and environmental protection

(1) According to the company's safety, health and environmental protection policy, formulate the safety, health and environmental protection measures of this unit to ensure the safety of personnel and equipment and environmental protection.

(2) Organize supervisors at all levels to carry out various safety inspections regularly, determine the environment of the factory and review whether the safety operation procedures meet the safety regulations, and take necessary measures.

(3) Strictly require subordinates to abide by laws and regulations on safety, health and environmental protection, and take direct responsibility for the safety, health and environmental protection of their personnel and equipment.

(4) Responsible for cleaning, protecting and greening the internal environment in the area of responsibility of the unit.

4 product yield and quality

Abide by the relevant operating rules, improve the process, and ensure and improve the product output, quality, work quality and service quality of the unit.

5 productivity

(1) Organize the preparation of appropriate post personnel to realize the operation function of the cost unit.

(2) Responsible for training every employee, completing the assigned work safely and effectively, and enhancing the centripetal force of employees to the company.

6. Coordination and contact: Coordinate and contact with relevant units to deal with any special problems and incidents. 7 management activities: cooperate with the implementation of various management activities of the company, and regularly review the implementation.

8 cost management: control all costs of the unit and establish complete records. Responsible for inculcating the concept of cost, researching and implementing various methods to reduce costs.

Others: Perform temporary tasks assigned by superiors.

Job responsibilities of production director

1. Job functions:

(1) Be responsible for the production management, production organization and safety work of the rolling mill, and supervise each operation area to make it safe.

The improvement of production index.

(2) Organize the formulation of various production systems of the branch factory and supervise their implementation.

(3) Communicate with the company's production department and prepare the production plan in time. Coordinate all departments, operation areas and teams to complete the production plan.

2. Safety and health

(1) Assist the factory director in formulating the safety and environmental protection measures of the unit to ensure the safety of personnel and equipment and environmental protection.

(2) Organize supervisors at all levels to carry out weekly safety inspection, and evaluate and improve the problems existing in the inspection.

(3) Participate in the joint safety investigation of the company as required.

3. Product output

(1) Organize daily production scheduling meeting of rolling mill.

(2) Organize the daily maintenance of the rolling mill.

(3) Organize the analysis of production accidents in rolling mills.

(4) Organize monthly production summary of rolling mill.

4. Others: Perform tasks temporarily assigned by superiors.

Job responsibilities of technical factory director

1. Be responsible for the technical management of the whole plant under the leadership of the factory director.

2. Be responsible for leading the work of Technical Quality Department.

3. Be responsible for the technical guidance of all functional departments and relevant branches of the plant.

4. Be responsible for the process technology and new product development of the whole factory.

5. Be responsible for the energy and technical transformation of the whole plant.

6. Be responsible for the management and technical management of rollers, lathes and rolling mill assemblies.

7 responsible for the implementation of the economic responsibility system in charge of the department.

8. Responsible for the management and supervision of manipulation technology.

9. The execution of the process system has the right of reward and punishment and inspection.

10. Responsible for completing the temporary work assigned by the factory director.

1 1. Responsible for the training of employees in the whole factory.

12. Organize the analysis, inspection and rectification of quality accidents.

Job responsibilities of equipment factory director

1. Be responsible for the equipment management of the rolling mill, supervise the workshop to check the mechanical and electrical equipment, and keep the equipment in good condition.

2. Organize equipment daily meeting, weekly summary and monthly summary.

3. Organize supervisors at all levels to conduct weekly equipment inspection, and evaluate and improve the problems existing in the inspection.

4. Organize equipment maintenance and emergency repair.

5. Review the plan submission and spare parts storage of equipment spare parts.

6. Control equipment maintenance cost and spare parts cost.

7. Organize the analysis and summary of equipment accidents.

8. Establish and improve the equipment management system: special management of industrial furnaces, special equipment, industrial buildings and equipment deterioration.

9. Others: Perform tasks temporarily assigned by superiors.

Responsibilities of the director of the comprehensive office

1. Lead the overall work of the branch, supervise and implement the job responsibilities of each post of the branch, and ensure the smooth completion of all work.

2. Responsible for the activities of various departments in the factory to ensure the smooth development of the factory work.

3 responsible for the management and use of seals, letters and certificates, and formulate a system for this purpose. Seals and letters of introduction should be protected by designated personnel. Records should be kept when using.

4. Responsible for the external reception and coordination of the cooperative units in the factory.

5. Be responsible for the use and management of meeting rooms and photocopiers, and the sorting and distribution of meeting minutes.

6. Responsible for arranging car use and vehicle management.

7. Responsible for the hygiene and customization management of the factory.

8. Strengthen ideological and political work, mobilize the enthusiasm of employees, strengthen unity and improve the overall quality of employees.

9. To undertake matters assigned by the collective decision-making and individual leaders.

Job responsibilities of statistical accountants

1. Responsible for index statistics and cost accounting of rolling mills. Analyze the process cost and expense consumption of high-speed wire and bar, and report to the factory director once a week.

2. Be responsible for the month-end visa settlement of foreign material consumption, energy consumption, automobile transportation fee and safety fee.

3. Be responsible for daily costs, establish original records and collect original data.

4. Be responsible for the inventory and check of raw material warehouse and finished product warehouse, analyze the material balance of the process, and timely grasp the difference between the physical quantity and the book quantity in the reservoir area.

5. Be responsible for the classified management and registration of all kinds of documents in the rolling mill.

6. Responsible for conveying and implementing the important documents issued by the company, and inspecting and assessing the implementation.

7. Be responsible for the amateur cultural life of the workers in the rolling mill, actively participate in various cultural and sports activities organized by the company, and do a good job in publicity and reporting.

8. Be responsible for the daily reception and handling of rolling mills, and prepare for plant-level meetings.

9. Complete all temporary tasks assigned by the leaders.

Job responsibilities of comprehensive personnel

1, responsible for the post setting and staffing of the rolling mill.

2, responsible for the steel rolling mill personnel handover procedures.

3. Be responsible for the attendance and salary audit of the staff of the rolling mill.

4. Be responsible for the statistics and implementation of performance appraisal of rolling mills.

5. Be responsible for establishing the personnel information account of the rolling mill.

6. Complete the tasks temporarily assigned by the leaders.

Responsibilities of equipment engineer (hydraulic, electrical, mechanical)

1, responsible for the management of equipment inspection, maintenance, equipment technology, technical transformation and technical supervision of the rolling mill.

Work. Ensure that the equipment performance of the rolling mill meets the production requirements, so that the equipment is always under control.

2. Responsible for revising the equipment in charge, improving the equipment maintenance procedures, and revising and perfecting the equipment.

Technical standards (spot inspection standards, maintenance technical standards, maintenance operation standards, grease supply standards) and other basic data, and modify and supplement according to the equipment usage. Implement specialized management of equipment.

3. Carefully carry out professional spot check operations as planned, and carry out spot check dimensions for post operators or operators.

Maintenance business guidance, participate in precision inspection.

;