How to adjust the hot stamping holographic positioning electric eye

1. Manual bronzing machine adjusts the handwheel at the upper end of the machine to the required pressure. Install bronzing paper, automatically feed the paper for one stroke after power-on, and then automatically feed the paper for one stroke after each press and lift. The automatic paper feeding stroke length is controlled by time delay relay, from 0 to 10 second. The required automatic paper feeding length can be set by adjusting the time delay relay.

2. Set the pointer to the required temperature. After 2 to 3 minutes, the green light stops and the red light lights up. At this time, the temperature indicated by the thermometer above the table is the actual temperature of the platen, and the automatic temperature control will keep the temperature at the set temperature point.