Installation method of wooden floor in Chengdu

Chengdu wooden floor installation method is divided into the following steps:

1. Ready

Before installing the wooden floor, it is necessary to carefully measure the size of the room and calculate how many floors are needed. At the same time, the ground needs to be thoroughly cleaned and treated to ensure that the ground is flat, dry and smooth.

2. Determine the installation direction

Before installing the wooden floor, you need to determine the direction of the floor installation. In general, the installation direction of the floor should be perpendicular to the longest wall in the room. This can make the floor look more beautiful.

3. Laying building moisture-proof film

Before the floor is installed, the floor should be covered with a layer of building moisture-proof film. This can prevent the moisture on the floor from affecting the quality and life of the floor.

4. Start the installation

First of all, put the first floor on one side of the room to ensure that it keeps a certain distance from the wall. Then, use floor pliers to pull the first floor to the front joint of the second floor and connect them together. Continue to place and connect the remaining floors until the whole room floor is covered.

5. Install the floor edge

In the final installation of the floor edge, it is necessary to cut the floor into appropriate sizes with a saw and fix the floor on the ground with nails. This can ensure that the floor is firmly fixed on the ground after installation.

To sum up, before the wooden floor is installed, it is necessary to prepare the floor of the room, lay a moisture-proof film and choose the appropriate installation direction. Then, install the floor one by one until the whole room is covered. Finally, the edge of the floor is installed and trimmed to ensure that the floor is evenly connected and fixed on the ground.