Color essence, red, yellow and black pigment, what proportion can be adjusted?

At present, the color of general furniture on the market can be adjusted by three kinds of flavors: red, yellow and black, but it depends on what brand of flavor you use. Because the essence concentration of each brand is different, the proportion of essence used in general furniture factories is above 100-300 kg. Without an accurate number, you can't say it all at once, but you can pay attention to the following points: 1 black. Color essence is used the least, its color is high, and it can only be added slowly. 2. Try to add less red essence to the light-colored things. It has high chroma and strong color-changing ability. Dark red or crimson can be asked not to engage in 3. The maximum dosage of yellow essence is not strong, and color matching is an advanced technology, which can only be achieved through long-term experience accumulation. Be careful when adjusting the color (1). Generally, the samples are tested first, and the amount of paint to be mixed is obtained initially, and then the samples are prepared according to the results of the samples. First, adjust the secondary color and secondary color in a small container. \x0d(2) First add the main color (the color with large dosage and low coloring power), then slowly and intermittently add the dark color (or color matching) with strong dyeing power, and observe the color change at any time. \ x0d。 Don't overdo it. \x0d(4) When matching colors, the colors of paint and dry film will be slightly different. The colors of various paints are generally lighter when wet and darker when dry. Senior Furniture Spraying Technician