Job Recruitment Website - Job seeking and recruitment - General dimensions and measuring methods of indoor wooden doors

General dimensions and measuring methods of indoor wooden doors

When consumers buy furniture brands and wooden doors, the first thing to consider is the size of furniture and wooden doors. As we all know, if the door opening of the indoor door is not well measured, the wooden door will not be installed, and the furniture size will not meet the standard, which will bring a lot of inconvenience to consumers. Next, I will tell you about the conventional dimensions and measurement methods of indoor wooden doors. I hope I can help you!

Door opening size standard

The standard size of the indoor door is: 860mm×2050mm×240mm.

The standard size of the entrance door is: 950mm×2050mm×90mm or 50 mm× 2050 mm× 220 mm

Measurement method of door opening size

Note: The measurement of the doorway shows that the following doorway is the size of the decorated doorway, and it will not be modified. For doorways that are still under renovation, it is suggested to make a doorway with a height of 2050mm and a width of 860 mm. Make doorways according to this size, and the display effect of finished doors is the best. Accord with ergonomics and aesthetics.

Measurement method of door opening size

1. actually measure the width and height of the doorway. It is necessary to measure whether the top, middle and bottom of the doorway are consistent. In case of inconsistency, the narrowest part shall prevail, but the error shall not exceed 20mm.

2. If the error exceeds 20mm, the holes in the wall should be corrected by cement mortar or lime.

3. The thickness of the door wall should be measured at the top, middle and bottom to see whether the thickness of the wall is the same, and whether the thickness of the left and right walls and the wall at the top of the door are the same, and their maximum values are different, but the error shall not exceed 5㎜.

4. If the wall thickness error exceeds 5㎜, it needs to be corrected.

5. If the wall is a T-shaped wall, it is necessary to use blockboard as a fake wall with a width of 50-60mm, and place the door cover line. The thickness is the same as that of the wall.

6. The minimum thickness of the door wall is not less than 80㎜. Low 80mm door frame strength is not big, the support for the door is not enough.

If it is less than 80 mm, it is necessary to add a thick wall to more than 80 mm. When there is a protruding beam above the door, the door cover line cannot be installed. It is also necessary to make a fake wall 50-60mm high, the length is the same as the width of the doorway, and the depth is the same as the thickness of the doorway.

8. There are steps at the door. The step height should be added to the sleeve line with step edge, and the specific size depends on the step height.

9. Pay special attention to the wall thickness of the bathroom and kitchen entrance. Generally, single-sided bricklaying is 25㎜ thick and double-sided bricklaying is 50㎜ thick. The details are signed by the designer, the customer and the decoration company. The final dimensions shall include the thickness of the wall tiles. You'd better measure the wall tiles after they are pasted.

10. Pay attention to the opening direction of the door when measuring. The door opening direction is defined as: viewed from the front of the door, the handle is on the left and the handle is on the right.

1 1. The measurement of dumb mouth and window cover is basically the same as that of the door opening, but the dimensions are recorded according to the measured results without deduction.

Dumb mouth: refers to the wall opening without doors or other things, such as the opening between living room and balcony, bedroom and balcony.

Window cover: refers to the wooden cover (or other materials) wrapped around the edges of window frames and door frames, ranging from a few centimeters to the wall.

Mute window cover one-sided dumb mouth: only dumb mouth with door cover line on one side is one-sided pass.

For example, entering the house is dumb. Bilateral dumb mouth: dumb mouth with doorways on both sides is bilateral communication. It's like the balcony is dumb.

My conclusion: The above is the general size of indoor wooden doors.