Use of Receiving Shaft of Circular Knife Die Cutting Machine

1. Turn on the power and turn on the on-screen switch with the key.

2, put the raw materials on the reel, pull the raw materials to the tail, with the pressure shaft.

3. Stick 0.2mm PET on the lower template, stick 2mm foam on the surface of the mold to protect the mold, then stick the mold on the upper template, put the upper template on the mold base, and lock the mold with the left middle and right front locks.

4. Click on the screen menu to open the parameter setting, set the stretching length (stretching length is: die-cutting product width+jumping size), and set the production speed (3000- 12000).