What's a forklift like?

The top of the high forklift is slender and the bottom is clumsy and bulky.

Only a forklift over 6 meters can touch the edge of a high-grade forklift, and a forklift over 10 meter is a real high-grade forklift, which best reflects the manufacturing level of the manufacturer. High-altitude pick-up forklift is a new type of electric forklift used for pick-up trucks, which can improve work efficiency and ensure a larger wheelbase. Small turning radius, suitable for narrow walkways, and can be loaded and unloaded on higher platforms.

Forklifts move forward, and generally forklifts are piled up in narrow passages. The port uses empty containers with high doorframes, which are suitable for high-rise indoor storage and docks. If the forklift operated by ordinary people is not the same model, they must be trained to drive. Forklift is the most widely used means of transportation at present, mainly used in ports, stations, airports, freight yards, factories and workshops.

Technical parameters of forklift truck

1. Rated lifting weight: The rated lifting weight of forklift refers to the maximum weight of the goods allowed to be lifted when the distance from the center of gravity of the goods to the front wall of the fork is not greater than the distance from the center of load, expressed in tons. When the center of gravity of the goods on the fork exceeds the specified distance from the load center, the lifting weight should be reduced accordingly due to the limitation of the longitudinal stability of the forklift.

2. Load center distance: Load center distance refers to the horizontal distance T from the center of gravity of the fork to the front wall of the vertical section of the fork when standard goods are placed on the fork, in mm. ..

3. Maximum lifting height: The maximum lifting height refers to the vertical distance between the upper surface of the horizontal section of the fork and the horizontal ground where the forklift is located when the forklift is fully loaded and lifts the goods to the highest position on the flat and solid ground.

4. Gantry inclination: Gantry inclination refers to the maximum inclination of the gantry forward or backward relative to its vertical position when the forklift is unloaded on the flat and solid ground. The function of inclination angle is to facilitate the fork to take and put goods, and the function of inclination angle is to prevent the goods from slipping off the fork when the forklift is driving with goods. Generally, the front angle of forklift is 3-6, and the front angle is 10- 12.