Home 1.5m corridor, with 800x800 tiles. How to paste the wave conductor?

If your corridor and the middle floor of the living room are distributed as a whole, the waveguide in the corridor area should be aware of the connection and coherence with the waveguide in the living room area. For example, the waveguides in the living room are distributed along the wall root, so that the waveguides in the corridor are the same, so that the waveguides in all indoor spaces can be connected, which is more beautiful and elegant. If there is something similar to the door stone separating the crossing and the living room, then the indoor space of the corridor can be considered as an area independently, and it is not necessary to fully consider the connection and coherence with the waveguide body of the living room, like you said, sticking 800*800 floor tiles.

When the floor tile is laid obliquely in that way, the diagonal length of the floor tile is 1 13 1mm, so a dark waveguide is added on both sides of the floor tile, which is equivalent to the waveguide in the corridor area forming a closed loop, and the total width of the waveguide can be selected according to the color of the floor tile. Corrugated conductors represent boundaries and refer to the edges of floor pavements. Also known as waveguide, also known as lace diagram or boundary line. , mainly used near the ground or in corridors, doorways and other areas. Generally, it is a decorative line made by the floor (ground) surface of block material along the corner; There are always different widths.

In order to improve the design effect, a contour different from the overall ground color is added to the floor construction method. Actually, in your case, there are two solutions. One is the peripheral waveguide, the center of which is divided into two parts, and the other is a whole floor tile in the middle. Personally, I suggest choosing the second scheme. Why? As long as we adhere to the principle of floor tiles with as few seams as possible, there is another reason, that is, from the perspective of geomantic omen, if there is a seam in the middle, it is unlucky to face the door or somewhere.

Views like nature have no scientific basis. Listen and laugh. Glass transmission line is a wire frame used for decorative design of floor tiles to improve visual impact. It can be designed and pasted in any way. Just calculate the specifications and you can remove the whole brick in the middle. How wide the remaining specifications are and how much glass transmission lines are made are all personal preferences. The employee's charge is that the bigger the glass transmission line, the higher the charge standard. It is suggested to lay a prism in the middle of "three glass transmission lines". If the prism is laid, the embedded part in the middle is1.13m, and the rest is 0.37m for the glass transmission line. It can be evenly distributed according to the arrangement of large, medium and small.