Job Responsibilities of Lifter

Lifter job responsibilities (general 13 articles)

Nowadays, we can come into contact with job responsibilities in more and more places. The clarification of job responsibilities is important for enterprises to standardize employment and avoid risks. is very important. There are many things to note when formulating job responsibilities. Are you sure you know how to write them down? The following are the job responsibilities of crane workers that I have compiled. They are for reference only. You are welcome to read them.

Lifter job responsibilities Part 1

1. Responsible for the operation of the gantry crane. Drivers must hold an equipment operation certificate before they are allowed to operate. Operators must strictly abide by relevant safety regulations.

2. Before taking charge of work, all transmission devices, operating mechanisms, large and small trolley wheels, drums, hooks, pulleys, pins, wire ropes, etc. should be inspected for wear and tear in strict accordance with the inspection regulations. Bad place.

3. Responsible for checking that no objects are allowed to be parked on the crane track and within one meter on both sides. After rain, check whether the crane roadbed and track are in good condition.

4. Responsible for checking whether the signal bell, signal light and lighting equipment are complete, testing the lifting height and travel limit switch, and whether the brake actions are sensitive and reliable.

5. When operating, the driver only listens to one person's instructions. The driver and the commander should have obvious hand signals or audio signals. The driver should respond with an audio signal before executing the operation. If there is danger or the crane breaks down, no matter who the "stop" signal comes from, he should stop immediately.

6. Responsible for hoisting safety, the first hook should be tested for lifting first. When lifting the heavy object 200 mm from the ground, do a brake test and confirm that the hoisting is good before operating. During the movement, the hoisted heavy objects should be at least 0.5 meters higher than all objects in the movement.

7. Responsible for filling in inspection records and shift handover records. If any problems are discovered, promptly notify on-site maintenance personnel for repairs.

8. Responsible for the normal operation of the equipment every day. Lifter Job Responsibilities Part 2

1. Responsible for the operation of the truck and the loading and unloading and transfer of materials, and cooperate with warehouse, workshop, maintenance and other personnel to perform the truck operation.

2. Responsible for the distribution of all large incoming materials and production materials, hoisting during the transfer of the complete machine and shipment, and cooperating with the quality department in hoisting and turning over workpieces during the inspection process.

3. Classify and recycle packaging boxes and transportation tools in the work area.

4. Responsible for hoisting, installation, accurate coding, and coordinating machine installation in the factory. Electrical installers assemble products

5. Use appropriate methods and correct spreaders according to different components and materials to carry out lifting work.

6. Brutal operation and risky hoisting are strictly prohibited.

7. Strictly implement the ten no-hoisting rules to ensure hoisting safety.

8. Do a good job in the "6S" work in the responsible area in a timely manner every day, including daily inspection and maintenance of equipment and equipment, and the cleanliness, sanitation, neatness and safety of the environment.

9. Assist in warehouse inventory at the end of the month. Lifter Job Responsibilities Chapter 3

① Strictly abide by the company's rules and regulations, perform job responsibilities, and abide by operating procedures;

② Establish good professional ethics, obey management, and work together in unity , to ensure the completion of safe production tasks on duty;

③ Strictly abide by work positions, abide by labor disciplines, and shall not leave the post without reason;

④ Make all preparations before going to work, and do a good job Conduct pre-shift inspections to promptly remove various dangerous factors and obstacles that affect lifting operations to ensure safe operations;

⑤ If a crane malfunction or hazardous factors are discovered during the operation, the operation should be stopped and Immediately report to the relevant personnel. No operation is allowed until faults or hidden dangers are eliminated;

⑥Continuously improve professional quality, work ability and professional skills, and consciously perform maintenance and daily management of lifting machinery in accordance with the requirements of the use and maintenance instructions Work;

⑦ Carry out the handover of lifting operations according to prescribed procedures.

Lifter Job Responsibilities Chapter 4

1. Obey the administrator’s command and dispatch, complete crane production tasks on time, with quality and quantity; hand over the shift on time, and carefully fill in the crane work record on duty, and find equipment problems during work Report.

2. Strictly implement safety production management regulations and crane operation operating procedures to ensure the safety of crane operations.

3. Do the daily maintenance of the crane carefully, take good care of the machinery and equipment, and ensure that the crane is clean and the equipment is in good condition.

4. Work hard to learn business techniques and continuously improve operational skills.

5. Strengthen professional ethics, be civilized and polite, establish a good sense of service, and serve production enthusiastically.

6. Strictly abide by work disciplines. It is strictly prohibited to operate under the influence of alcohol. It is strictly prohibited to operate the crane while sick. The crane is not allowed to be used privately for other operations unrelated to production, and the crane is not allowed to be operated by unlicensed personnel.

7. Actively complete other tasks assigned by superior leaders. Lifter Job Responsibilities Part 5

1. Hoisting machinery operators referred to in this responsibility include drivers, ropers, and conductors.

2. The operator’s physical health examination has passed.

3. Only after receiving professional technical training in hoisting machinery maintenance and operation, and obtaining the relevant special operator operating license, can you hold a license to work.

4. The qualification certificates of operating personnel must be reviewed and trained in accordance with relevant national regulations.

5. Strictly abide by various rules and regulations and safe operating procedures. Obey assignments and complete your job.

6. Be familiar with and master the performance of lifting machinery, and establish operation and maintenance records of lifting machinery. Establish files such as lifting machinery service specifications, safety production systems, and standardized operating procedures. Cooperate with professional maintenance units to perform regular maintenance and upkeep of lifting machinery.

7. Before running every day, a simple check should be done. Only when it is determined that there is no fault can it run normally and keep daily running records.

8. If a malfunction occurs during the operation of the hoisting machinery, it should be immediately eliminated and the trapped personnel should be rescued, immediately reported to professional maintenance personnel for repair, and maintenance records should be kept.

9. Overweight lifting machinery is prohibited.

10. After each day's work is completed, the lifting machinery must be parked at the base station, the power supply must be cut off, and records must be kept.

11. Complete other tasks assigned by the leader. Lifter Job Responsibilities Part 6

1. The crane roadbed and track laying should comply with factory regulations, and the track grounding resistance should not be greater than 4Ω.

2. Gantry cranes that use cables should be equipped with cable drums, and the distribution box should be set in the middle of the track.

3. Cranes powered by slide lines should be marked with distinctive colors on both ends of the slide line, and protective railings should be installed on the slide line.

4. The track should be straight, the fishplate connecting bolts should not be loose, and there should be no obstacles within the operating range of the track and crane. The gantry crane should loosen the rail clamp.

5. Key inspection items before operation of gantry and bridge cranes should meet the following requirements:

⑴The appearance of the mechanical structure is normal, and the connecting parts are not loose;

　⑵The appearance of the wire rope is in good condition and the rope clamp is firm;

⑶All safety limit devices are complete and intact.

6. Wooden boards or insulating boards should be placed in the operating room. After the power is turned on, a test pen should be used to test the metal structure to confirm that there is no leakage before getting on the machine; special escalators should be used to go up and down the control room.

7. Before operation, no-load operation should be carried out. Operation can only be carried out after confirming that each mechanism is operating normally, the braking is reliable, and each limit switch is sensitive and effective.

8. Before starting, a sound signal should be given to indicate that the lifting and lowering of heavy objects should be carried out smoothly and at a constant speed. When lifting large items, it should not be fast, and a pull rope should be tied to prevent swinging.

9. When lifting and transporting flammable, explosive, harmful and other dangerous goods, it should be approved by the safety department and corresponding safety measures should be taken.

10. It is strictly forbidden to pass over people or equipment when lifting heavy objects. When traveling with an empty truck, the hook should be more than 2m above the ground.

11. Drive slowly after lifting heavy objects, and do not suddenly change speed or reverse while driving. When two cranes are operating at the same time, a distance of 3 to 5 meters should be maintained. It is strictly forbidden to use one crane to push another crane.

12. When the crane is traveling, the driving wheels on both sides should be synchronized. If any deviation is found, the operation should be stopped and the operation can be continued after adjustment.

13. During operation, it is strictly prohibited for anyone to cross from one bridge crane to another.

14. When the operator enters the bridge from the control room or performs maintenance and inspection, there should be an automatic power-off interlock device or the power supply should be cut off in advance.

15. When gantry and bridge cranes operating in the open air encounter strong winds of level 6 or above, they should stop operations and lock the rail clamps.

16. When the deflection of the main beam of the gantry or bridge crane exceeds the specified value, it must be repaired before use.

17. After the operation, the gantry crane should be parked on the stopping line, locked with a rail clamp, and the hook raised to the upper position; for an overhead crane, the trolley should be parked in the middle of the two tracks. , the hook is raised to the upper position. No heavy objects should be hung on the hook.

18. After operation, the controller should be set to zero, the power should be cut off, and the control room doors and windows should be closed and locked. Lifter Job Responsibilities Chapter 7

Job Responsibilities:

1. Collect technical information in professional fields and provide the collected information to the leaders of the department on a regular basis;

2. Propose product improvement suggestions and new product development suggestions

3. Participate in the research and development and design of the company's new products

4. Responsible for the feasibility of the structural design of the motor supporting trolley for the new product

5. Participate in the structural R&D and design of the company's new product motor supporting trolley;

6. Design products to meet product design requirements and determine product technical performance standards;

7. Participate in tracking the trial production process of new products;

8. Participate in writing new product research and development reports;

9. Supporting trolleys for the company’s existing products (complete Machine) improvement

10. Design a better supporting trolley solution for permanent magnet motors;

11. Design a trolley scheme that meets the customer's requirements to the greatest extent according to the different needs of customers;

12. Design trolley solutions for different industries to meet their needs;

Job requirements:

1. Have the ability to independently and reasonably design crane trolleys and optimize the design;

Job requirements:

p>

2. Be familiar with the design and manufacturing of mechanical processing technology, and understand and be familiar with the working characteristics of various types of machine tools;

3. Be familiar with the operating conditions and characteristics of various types of cranes and be proficient in general bridges Design of gantry cranes and other cranes;

4. Be familiar with the grades and properties of various metal and non-metal materials, and have certain experience in the application of materials;

5. Be proficient in using drawing software such as CAD and solidworks; Lifter Job Responsibilities Chapter 8

1. Driving operators should be trained before taking up their posts, carefully study the relevant provisions of the "Safety Management of Hoisting Machinery", and Improve your business skills based on the actual situation of the company.

2. Always keep the vehicle and related parts in good condition, the operating mechanism is sensitive and reliable, and the safety devices are complete and effective.

3. Be familiar with the driving performance of this workshop, understand the basic principles of machinery and electrical aspects, be skilled in operation, and achieve "stable, accurate, fast" safety and reasonableness.

4. Strictly abide by safety operating procedures, insist on "ten no hangings", and ensure safe production.

5. Strictly abide by the "Equipment Management System" and carefully inspect, maintain and clean equipment.

6. Effectively stop irrelevant persons from driving.

7. Lifting items must consider the reasonable use of lifting rigging and avoid overloading.

8. When lifting, operate according to regulations, and no one is allowed to pass under the lifted object.

9. Complete other tasks assigned by the leader. Lifter Job Responsibilities Chapter 9

1. Strengthen quality and safety education in this class, be familiar with and adhere to the safety technical operating procedures for lifting and lifting

2. Dispatch work reasonably and organize carefully Production, ensuring safe and reliable lifting of equipment and materials

3. Obey workshop instructions and actively cooperate with other types of work to improve production maintenance

4. Arrange production tasks for this shift and clarify the work Requirements and precautions: Check the lifting equipment and tools from time to time. If defects and unqualified tools and rigging are found, they must be clearly marked and stored in isolation and reported to the equipment department for repair or scrapping and updating to prevent accidents due to problems with the lifting equipment

5. A lifting plan must be developed for the lifting of large equipment and valuable equipment. Loads exceeding the capacity of the lifting equipment in the workshop and difficult lifting tasks must be approved by the relevant departments

6. Unified command during operations Work closely with the crane driver and be responsible for the service work of the class

7. Strive to improve the professional level and overall collaborative spirit of the employees in the class, and do a good job in safe production and civilized construction. Hoisting Job Responsibilities Chapter 10

　1. Responsible for the maintenance and repair of production workshop equipment, collaboratively completing large and medium-sized equipment repairs, equipment technical modifications, and installation and commissioning of new equipment to ensure the normal progress of production and daily work.

2. Assist the machine repair shop director in managing the maintenance group.

3. Comply with and implement the rules, regulations, safety measures and safety operating procedures of superiors regarding safe construction, be responsible for solving unsafe problems existing in the construction of this team, and effectively ensure safe construction.

4. Responsible for organizing team safety activities, conducting safety activities once a week, and summarizing the safety work of the team, so as to check safety before class and talk about safety after class. List safety conditions as an important content, so that safety must be arranged when arranging production.

5. Regularly provide safety education to team members and supervise team members to strictly implement various safety production rules and regulations.

6. Responsible for educating new workers on job safety operating procedures and safety knowledge, and designating a dedicated person to lead the new workers

7. Frequently check the safety conditions of the construction site, and be responsible for checking and Maintain production equipment, tools and safety protection facilities, use labor protection supplies correctly, and promptly correct illegal and risky operations.

8. Understand the physical, mental and technical conditions of the team workers and allocate work reasonably.

9. If a work-related injury occurs, you should report it immediately, protect the scene, and participate in the investigation and analysis of the accident.

10. Complete maintenance applications for your production workshop proactively and enthusiastically, and do not shirk at will. When encountering problems, actively cooperate with the workshop equipment safety officer or operator to solve the problem in a timely manner.

11. Continuously study business technology over a long period of time, and have work skills to promptly and accurately determine the cause of faults, repair them quickly or take effective measures.

12. Responsible for the work arrangements of the personnel on duty, leading the maintenance team to deal with various unexpected failures in a timely manner to ensure smooth production.

13. Conduct equipment inspections once a week to keep abreast of equipment operating status and reduce potential faults (once/week).

14. Fill in maintenance records, duty records, inspection records, etc. in a timely and standardized manner.

15. Maintain and keep the work tools of the position and the public tools and equipment of the machine repair shop.

16. Participate in various trainings and learn related professional knowledge and pass the examination.

17. Actively carry out repair and recycling work to avoid waste.

18. Implement the spirit of good work practices at work, keep all workplaces clean and hygienic, and be responsible for all 6S tasks in the workshop.

19. Participate in maintenance quality work meetings every quarter to summarize and improve (once/quarter).

20. Strengthen work communication with the production workshop and coordinate the working relationship with the production workshop.

21. Assist the machine repair shop director to complete the annual cost budget (once/year).

22. Complete the half-year/year-end work summary of the team (twice/year).

23. Complete other tasks assigned by the workshop and leaders. Hoisting Machinery Job Responsibilities Chapter 11

Hoisting machinery safety management personnel should master relevant safety technical knowledge and be familiar with the regulations and standards related to special equipment. They must be certified by the quality inspection department after passing the assessment, and work seriously Perform the following responsibilities:

1. Be fully responsible for the management of the use of special equipment in the unit;

2. Establish, improve and manage safety technical files for the use of special equipment;

3. Establish and improve the corresponding safety management system for the use of lifting machinery, and regularly supervise and inspect its implementation;

4. Prepare routine inspection plans and periodic inspection plans, and implement the inspection application for periodic inspections;

5. Frequently go to the site to check the usage status of the lifting machinery, check and correct violations of the use of special equipment;

6. Participate in the investigation and analysis of lifting machinery accidents to find out the causes, Formulate preventive measures;

7. Organize a special equipment emergency rescue drill every year, record and archive the drill;

8. Organize the study and implementation of the superior department’s instructions on special equipment management The spirit of laws, regulations and documents; regularly organize operators to carry out safety education, training and assessment of work capabilities, and improve the professional quality and technical level of operators and maintenance personnel. Lifter Job Responsibilities Part 12

(1) Responsible for the safe operation of the crane in accordance with the crane instructions and safe working systems. Strictly implement the operating procedures and relevant management systems of lifting machinery;

(2) Participate in relevant education and training regularly, consciously learn theoretical knowledge of lifting machinery, and train excellent operating skills;

(3) Carry out daily maintenance and self-inspection of the crane, and keep records;

(4) Master corresponding basic emergency rescue skills;

(5) Discover potential accident hazards or Other unsafe factors should be reported immediately to the on-site management personnel and the relevant person in charge of the unit. When potential accidents or other unsafe factors directly endanger personal safety, stop operations and take possible emergency measures before evacuating the work site;

(6) Except when receiving a stop signal, only Ability to obey clearly identifiable signals from command personnel. Lifter Job Responsibilities Chapter 13

(1) Be able to make standard command gestures;

(2) Be familiar with the performance and related parameters of the crane, and have the ability to command the crane and move it safely Ability;

(3) The rigging personnel are responsible for hooking and unloading heavy objects on the hoisting machinery's spreaders, and selecting applicable spreaders and lifting equipment according to the corresponding load positioning work plan;

(4) The commander is responsible for transmitting the signal from the crane operator to the driver;

(5) Strictly implement the crane operating procedures and relevant safety management systems, and strictly prohibit illegal operations;

(6) Regularly participate in relevant safety education and training, continue to delve into theoretical knowledge related to hoisting, and summarize practical experience;

(7) Responsible for the safety hazards at the hoisting operation site Investigation;

(8) Responsible for supervision during the operation;

(9) Responsible for the maintenance of slings;

(10 ) Master the corresponding basic emergency rescue skills;

If any accident hazards or other unsafe factors are discovered, they should immediately report to the on-site management personnel and the relevant person in charge of the unit. When potential accidents or other unsafe factors directly endanger personal safety, stop operations and take possible emergency measures before evacuating the work site; ;