What does a car stopper do?

Car stopper is a kind of work in textile mills.

Pullman is a common job in garment factories, and practitioners need good eyesight and hard-working spirit. A car stopper is a job whose main responsibility is to command and control the driving, parking and loading and unloading of cars or other motor vehicles.

Its work contents include: entering the workshop in advance and doing well the handover related matters; Check whether the raw materials are consistent with the production progress before starting the machine, suspend the machine and report to the superior if it is abnormal; When working, patrol the machine and check whether the yarn path is normal. If defects are found, stop the machine in time and contact relevant personnel. Strictly abide by the technological process, and may not settle down without approval; Keep the working environment clean and orderly, and put the materials and equipment back in time after use.

The specific work of the car stopper

1. Keep the machine clean and check whether all mechanical parts are in place before starting.

2. The car stopper will be released as planned, and if there are any production problems on the way, report to the superior in time.

3. If you need to proof or turn over the sample, you should actively cooperate with the programmer and don't modify the program or pattern without authorization.

4. When producing large goods, pay attention to the bobbin number and color matching. The next piece can only be produced after it is submitted to the quality engineer for acceptance, and the workload completed that day is recorded.

5, regularly do a good job of machine dust removal, refueling and other maintenance work. Keep all mechanical parts lubricated smoothly.

6, do a good job of succession, have something to ask for leave in advance, obey the arrangement of the superior, do a good job.

7, in case of machine failure, troubleshooting rear can continue to run.

8. Check whether there is any leakage in the garment piece, strictly control the size of the lower piece, and reduce the production loss.