Job Recruitment Website - Job seeking and recruitment - How to break the decoration of 20 16? In this particularly rainy year!

How to break the decoration of 20 16? In this particularly rainy year!

In June and July, heavy rains continued in the south, and in July and August, heavy rains came in the north. In recent months, Bian Xiao's circle of friends has been swept by the storm! In the rainstorm season, we must pay attention to the humid decoration environment, otherwise the expected decoration effect will not be achieved from the beginning. In addition, such links as painting, flooring, circuit transformation, etc., also need to be very cautious in this rainy season!

1. The plates should be prepared in advance.

In stormy days, the air humidity is high, and those materials that are easy to absorb moisture, such as boards and plasterboards, are easy to get wet during storage or transportation, and the damp boards will have mildew spots. The wooden keel and wooden finished products made of boards will gradually dry with the air, and the water in the materials will easily crack and deform after volatilization. So don't transport it in heavy rain, but prepare it in sunny days and put it in a closed room in rainy days.

2. Scrape the putty and dry it thoroughly.

Blow putty to prolong drying time. Generally, putty should be scraped 1-3 times before painting the wall, during which the normal drying time is 1 to 2 days. Therefore, before scraping putty in rainy days, wipe off the water vapor on the wall with a dry cloth, and try to extend the time for putty to dry thoroughly, generally 2 ~ 3 days is appropriate.

3. Put an end to bare wire transformation

Pay special attention to the circuit layout when decorating in rainy days. Bare wires can't be directly buried in walls or floors, and insulated wire tubes with protective functions should be added. Especially in places that are easy to get wet by rain, such as balconies, the exposed copper wire ends must be wrapped to prevent the wires from being short-circuited after being wet.

Don't let the cement get wet.

When laying bricks on the ground in rainy days, it is best to cover the cement surface with kraft paper or plastic cloth, and at the same time, try to stay away from the water source to prevent it from being damp or forming blocks after soaking. After the floor tiles are laid, don't step on them immediately, but set a springboard when you pass.

5. It is forbidden to paint wood products in rainy days.

For wood products, whether it is varnish or nitrolacquer when mixing oil, try not to brush it in rainy days. Because the surface of wood products will condense a layer of water vapor in rainy days, if paint is painted at this time, water vapor will be wrapped in the paint film, making the surface of wood products turbid. Many process steps in decoration have a "technical intermission time", for example, cement needs a 24-hour solidification period; The paint also needs to be dried thoroughly every time before being brushed for the second and third time. In rainy days, the intermittent time of this technology generally needs to be extended, so we must wait patiently.

6. The paint should be sealed and preserved.

Whether it is oily paint or water-based paint, if it has been opened for use, it needs to be sealed tightly on rainy days. If the paint products are stored outdoors or on uncovered balconies in a large area, it is best to cover them with plastic sheets or newspapers, otherwise the paint can't be used after being damp, which will cause waste.

(The above answers were published on 20 16-07-24. Please refer to the actual situation for the current purchase policy. )

Click to view more comprehensive, timely and accurate new house information.