How to adjust the hydraulic pressure of Linde electric forklift

1. When adjusting, first open the angle needle valve on Linde electric forklift, loosen the positioning nut and turn the top adjusting lever counterclockwise.

2. Secondly, open the inlet valve at the front end of the pressure reducing valve. 4. Tighten the top adjusting lever in time according to the pressure gauge, and start the water pump to check the highest pressure. 6. Adjust the angle needle valve to make the pressure as stable as possible.

3. Finally, turn off the water pump, check the full shut-off pressure, and lock the positioning screw 9. Repeat the above steps to confirm the effective setting of 10, and put it into use after adjustment.