Summary of work in March

Summary of work in March (selected 5 articles)

Time goes forward in order by the annual ring, and the work for a period of time has ended. Looking back on the work in the past, I have gained a lot, so it is time to do a good job summary. So how is the general work summary written? The following is a summary of my work in March (five selected articles), which I carefully arranged. I welcome you to learn from it and hope it will help you.

Summary of my work in March 1

Unconsciously, I have been in Sanli Benuo for more than three months. During these three months, I personally felt the changes that have taken place in myself. Ideologically, the anxiety caused by the new environment when I first joined the company is now very practical; In terms of working methods, it has changed from the working methods of the pure installation service industry to the working methods of the production industry. I am enjoying the present working atmosphere more and more.

As a new employee who enters a brand-new working environment, although he has accumulated some work experience in his past work, it is inevitable that he will have a lot of pressure when he first enters the company.

1. Everyone has a long or short adaptation process when entering a new environment. Moreover, this is the first time that I have changed my job after graduating from school and challenged the new environment. It is inevitable that my adaptability will be lacking. The harmonious working environment and the help from my colleagues around me took me to the workshops to understand the production equipment and technological process, so as to get familiar with the work as soon as possible. The department leader found me some drawings of equipment and process flow to familiarize myself with the study, so that I can meet the work requirements as soon as possible. I am eager to learn, and now is a very rare opportunity. I am glad that I am working hard in the right direction of life. At this point, I can bravely face all kinds of difficulties in the future, and I believe I can do it.

2. I have worked for more than three years before, but that was in the complete construction service industry, which is still far from the current working mode. I have been in contact with the construction management of equipment and process pipelines for the past three years, and the materials are mainly carbon steel. After coming to Sanli Benuo, I jumped into the ocean of knowledge like a frog in the well, and my vision became limitless, so I saw the direction of life. Of course, the pressure comes with it. The equipment that I contacted before, such as towers, heat exchangers and pressure pipes, are static equipment, and the materials are single, and the work repetition rate is high. What I learned naturally and accumulated experience have great limitations. Now it's different, and the work content is more abundant, not only the static equipment before, but also many dynamic equipment like pumps, centrifuges, compressors, various mixers, freezers and so on. Materials are not limited to carbon steel, but also all kinds of plastic equipment and pipelines, glass-lined, glass-reinforced plastics, all kinds of lining pipes, the performance and use of various materials, as well as the selection of equipment, the determination of the position of various equipment and the direction of process pipes in the process flow, and the daily management work, etc., all need to be understood and familiar with as soon as possible until they are mastered. In order to get into the working state and adapt to the working environment as soon as possible, and meet the work requirements, we should constantly study at work, consult leaders and colleagues in time if there are any problems, actively learn various professional knowledge needed for work after work, and strive to improve our working ability and business level.

after three months, the company's working style at the beginning of the job is far from what it used to be. At first, I didn't realize it. Fortunately, there are good reminders and guidance from time to time from department leaders and selfless help from department colleagues, which has made a qualitative change for me. Of course, there are still many problems in my work that I need to face bravely. I'm not afraid of problems. Only when there are problems can I make progress, and only when there is pressure can I be more mature.

after three months' work and study, I found that work experience is really an intangible great wealth, which is true for everyone, especially for a company. Of course, this kind of wealth takes time to accumulate, but if a person can pay attention to some details of his usual work and learn from his predecessors with an open mind, then the accumulation of experience will be faster in the same time, and he will make more contributions to the company's development and growth, and the company's return to you will be objective. Obviously, the development of the company and individuals is closely related. In the accumulation of this experience, I hope I can do well, and now is a good opportunity. The department leader is a teacher worthy of our young people's humble advice. Thanks to Sanli Beno for giving me such a good learning opportunity, which will be a very important work experience in my life.

Three months' working time is still a little short, so I feel a little ashamed that I can't give constructive suggestions to the company. However, there is a saying that should be the "magic weapon" for every company to grow and develop, that is, details determine success or failure. Paying attention to details can improve work efficiency, avoid potential safety hazards, reduce equipment breakage rate and improve the company's economic benefits. Every employee of the company should be in line with the "details", and the company will do better and have confidence in the company's future! Summary of work in March 2

We are about to go through 211, which is full of emotion and strength. For me personally, this has been a fruitful year.

In this year, I have experienced the same feelings as everyone else, such as moving, farewell, harvest, gratitude and hard work. Both my life and work have made me re-examine my attitude and way of doing things in the past, and I have grown up. Especially after taking part in the work, with the support and help of leaders and colleagues, I have benefited a lot from the exercise I got in all aspects. Here, I must sincerely express my deep gratitude to all the leaders and colleagues for their tolerance, encouragement and help during this time. The following is a brief review and summary of my thoughts and work study since I joined the work.

First, the change and promotion of ideological consciousness

I have just left the campus, without any work experience, and I have not participated in professional training at the beginning of my work. Although a lot of professional knowledge is very attractive to me, it is still very strange, and I know that there is a big gap compared with other colleagues. And I also know that one of my biggest shortcomings is impatience and carelessness, and many things are done too quickly, which leads to many mistakes. In addition, although I am in the production department, I am unable to do many things. So with these worries, the excitement when I first came here was gradually replaced by pressure, and I always felt guilty and blamed myself.

With everyone's help and self-study, I gradually entered the working state, and my anxiety and tension were gradually calmed down, and I also had self-confidence and determination to do a good job.

review and summary of work and study

I was deeply impressed by the series of safety education and training given to us by the old employees when I first entered the factory.

Because ignoring any small hidden danger may cause big accidents in the future. Although I am not engaged in technical and operational work, the relative risk of work is relatively small, but in my usual work, I always keep in mind the policy of "safety first, prevention first" and learn from old employees, so that my personal awareness of safety in production can be continuously improved and enhanced, and I will make my due efforts for the company to achieve accident-free throughout the year.

the probation period is the main stage of learning, so when I first came to the company, I spent more time on duty with my colleagues in the main control room. Through their careful and detailed explanations, I also learned a lot about the work involved in duty and the professional knowledge of substation equipment.

The work on duty seems to be the same, but patience and carefulness are indispensable, which I have not done enough. In this respect, the original learning foundation is not solid, with the passage of time, the workload increases, and there is little time to finish the whole day's work on duty. In addition, personal learning initiative is not strong, so many failures caused by C are still not remembered, and the operation steps on duty cannot be skillfully completed. I should strengthen my professional study in my future work.

making a monthly report at the end of the month is the first job I received.

Although most of the work has been completed by myself through continuous learning in the past few months, I still feel nervous in the face of huge data, because there is a world of difference between one more zero and one less zero. But the more impatient you are, the more likely you are to make mistakes, and the psychology of wanting to finish the work quickly is also the reason for the frequent occurrence of calculation errors.

I'm really embarrassed and guilty of mentioning this issue in my annual summary again.

in my future work, I will continue to learn from the old employees, be serious and responsible, and guard against arrogance and rashness, especially in the statistics of data, and I should carefully check it, even if I calculate it again, I must ensure its correctness.

in order to welcome the autumn inspection work of the head office, I, as a librarian and colleague, have finished the work of sorting, cataloguing, binding, supplementing, changing the equipment and labels, and inputting them into the microcomputer. Although I worked hard during the period, I have to admit that my work is not in place and the quality is not high in the face of facts. This is directly related to the fact that my understanding of the documents and materials in the reference room is not detailed, solid and sufficient. In the future, I will have a correct attitude towards the work of the reference room, take it seriously, and strengthen my initiative. By becoming more familiar with all kinds of documents and materials, the archival work will be brought into the standardized and refined track required by the company, and it will also be convenient for colleagues to consult.

in addition, it is also one of my main tasks to cooperate with my colleagues and earnestly complete the tasks assigned.

Although the work is trivial, I will still treat it with a positive attitude and try my best to finish it.

third, the existing shortcomings and the direction of future efforts

through three months of work, I found many shortcomings and deficiencies in myself. For example, there is little communication with colleagues, lack of initiative in study and work, lack of thinking at work, and lack of attention to summary, especially in work, which is easy to be impatient, immature in handling many things and unable to make overall planning. These are the main reasons that lead to mistakes in work and troubles for colleagues. In the future work, in addition to following the arrangement of leaders at all levels as always, we should learn from leaders and colleagues their serious attitude and strong sense of responsibility, and we should also strengthen communication with colleagues, increase our knowledge through continuous study and summary, gradually strengthen and enrich our business knowledge, and strive to improve our work level, so as to do every job well.

At the same time, we should strengthen personal cultivation, correct our own behavior and consciously strengthen our study.

I also hope that you can correct and criticize my bad work in time, and I will accept and correct it with an open mind. C making the above summary at the moment when the old and the new are alternating is a reflection on my past and an incentive for my future life and work. Looking forward to 29, I realize that only when I have a direction in my actions and a goal in my work can I really have a bottom in my heart, and I can be busy but not chaotic, tight but not scattered, well organized and clear-cut, and gradually get rid of the phenomenon of just burying my head in work and not knowing how to sum up.

In the face of the current difficult employment situation, I have always cherished and been grateful to be a member of the company and to know so many sincere and enthusiastic colleagues. In this team, I feel her energy and passion all the time.

Mr. Zhu led his predecessors to build the company's glory with sweat, and paved the way for the company's development.

We should inherit the fine tradition and style of this team, and even more, we should add luster to her through our own efforts to achieve a beautiful chapter of the company. Work summary in March 3

I have been working for nearly three months since I joined the Panyu Tung Chung Sewage Treatment Plant on July X and transferred to the Linhai Water Supply and Distribution Project on August X. According to the company's regulations, I will make a summary of my work in the past three months, because I don't have much time to work in Panyu Tung Chung Sewage Treatment Plant, and my main work in the future will focus on the current project, so I mainly make a summary of my current project.

I. overview of the project

1. overview of the project

project name: power supply and distribution project in the water purification plant of Guangzhou Linhai Water Co., Ltd. Project location: huangge town, Nansha District, Guangzhou. The project mainly includes: installation of some equipment in low-voltage electrical room, installation of some equipment in high-voltage electrical room, laying of cables, installation of power management system and installation of lighting systems in each electrical room.

2. Number of works (completed)

Low-voltage electrical room:

(1) 2 low-voltage power distribution cabinets, numbered 17B1-17B2；, are installed in the power distribution room of the backwashing pump room;

(2) In the power distribution room of the sludge dewatering room, 7 low-voltage power distribution cabinets (numbered 16B1-16B7；) are installed;

(3) Laying cables from the low-voltage side of the transformer to the distribution panel and closed bus duct respectively;

(4) install lighting system.

High-voltage electrical room:

(1) In the transformer room, 23 high-voltage power distribution cabinets are installed, numbered G1-G23；;

(2) Install two dry-type power transformers in the backwashing pump room, and set up transformer shielding, high-voltage side cable bracket and grounding wire for transformer shielding;

(3) Install 2 dry-type power transformers in the electric room of sludge dewatering room, with transformer shielding, high-voltage side cable bracket and grounding wire for transformer shielding;

(4) install lighting system.

3. Contract, cost and construction period

The construction unit of this project is Guangzhou Linhai Water Affairs Co., Ltd., the construction management unit is Guangzhou Nansha Industrial Park Construction and Development Co., Ltd., the supervision unit is Guangzhou Hengmao Construction Supervision Co., Ltd., and the construction unit is Guangzhou Fandian Group. The contract price of the project is 12,458,275 yuan. The contract period is 7 days.

II. Supervision:

At present, my professional position is on-site supervisor, and I usually do a good job of on-site inspection and standing by.

I require on-site construction to comply with relevant regulations on safe and civilized construction, and I also study and write meeting minutes and other relevant materials and read relevant documents. The following are the learning experiences in the past three months:

1. Carefully study and be familiar with the terms of the Construction Contract (including Drawings and Bidding Documents, etc.) and the Entrusting Supervision Contract for Construction Projects, and strictly follow the contract requirements during construction. In the process of construction supervision, the construction unit has made many inspections on whether the relevant personnel and equipment are invested according to the requirements of the bidding documents, ensuring the smooth completion of the project. In changing the design, we have been realistic.

2. Understand the management requirements and regulations of safe and civilized construction. Put forward or issue a supervision notice to the construction unit in time where there are potential safety hazards on the site, and remind or issue a supervision notice to the builder who has not achieved civilized construction. Now it has achieved the requirements of safe and civilized construction. For example, the on-site builders did not pay attention to wearing safety helmets during construction at ordinary times, but they have been corrected after several rectifications; There are also fire hazards in the construction site, so the construction unit is equipped with fire extinguishers to ensure construction safety.

3. Be familiar with the construction drawings, and know something about the equipment positioning and installation of the whole project. A more comprehensive understanding of the focus of this project and