What are the advantages, construction and post-maintenance of household film?

The performance of ordinary glass is very simple, generally transparent, and then easily broken when touched. Ordinary glass can have the properties that everyone wants glass to have after using household film. Family stickers have become a popular mode in family life. Basically, families use home stickers. Some just don't know what home stickers are, but they are already in use. The following small series will introduce the advantages of home film, as well as the construction and post-maintenance of home film.

What is a family movie?

Home laminating is a technological revolution in laminating industry and an innovative home building material product with excellent "energy-saving" performance. Directly attached to the surface of window glass is a scientific and technological product that transforms ordinary glass into high-performance window glass. It has been widely used abroad, and now it is used in Shanghai, Beijing, Guangzhou and Shenzhen in China!

Advantages of home film

Save energy and electricity

Advanced household film has excellent thermal insulation performance.

In midsummer, it can block up to 80% of solar energy, reduce the indoor temperature by 2-5℃, and save the cost of air conditioning and refrigeration. In winter, it can reduce heat loss, keep indoor warm and save heating costs. After the product is used, it can save about 30% of the cooling and heating costs on average, and the cost of sticking film can be recovered in three years.

Reduce fading and protect property.

This film can block up to 99% harmful ultraviolet rays and a lot of solar heat energy. It is helpful to reduce the fading of decoration and prevent indoor items (carpets, sofas, art paintings, curtains, etc.) from fading and aging. ) and prolong the service life of TV sets and monitors.

Improve safety and protect your family.

Generally speaking, broken glass is a potential danger at any time in the case of accidents, storms or broken windows.

If the household film is pasted on the inner surface of the glass window, it can form an "invisible tough barrier" on the glass, which is helpful to improve the safety factor of the glass, prevent the glass from splashing damage caused by natural disasters and terrorist explosions, reduce the possibility of personal injury, protect property and prevent thieves from breaking the window and stealing. It is an effective way to ensure the safety of family members, and upgrade the existing glass windows with low cost and quick operation to meet the safety regulations.

Increase privacy

Metallized household film forms a "mirror" effect on glass. During the day, it can effectively block other people's peeping eyes, and does not affect the clear view of the outdoor landscape from indoors.

The decorative film series of home adhesive film not only has a good privacy effect, but also can match the indoor environment and create a unique privacy space.

Quick installation and convenient maintenance.

Fast construction speed, long service life, daily maintenance-free, one-time installation and lifelong use.

Home film pasting construction

1. According to the needs of the project, the film can be divided into two types: pasting on the existing building glass and installing the building window film.

2. When installing the film on the glass of the existing building, remove the objects that hinder the construction. The construction site should be kept clean, and waterproof canvas or plastic film should be used to protect the film glass from pollution.

3. When coating in the glass deep processing workshop, the coating workshop should be kept clean and tidy to prevent dust from adhering to the glass surface.

4. Before sticking the film, use a special cutter to remove the mud and dust, paint, silicone adhesive and other attachments on the glass, wipe the dust around the window frame with a soft lint-free cotton cloth, and wipe all the window corners, notches and accessories clean.

5. After the dirt on the glass surface is removed, fully wet the glass surface with special cleaning solution, evenly scrub the whole surface, and wash away the oil stains and floating dust on the glass surface.

6. Before the glass surface is removed, do not scrub the glass surface seriously polluted by sand with cleaning solution; Special tools should be used when scraping the adhesion on the glass surface, and accessories such as glass, window frames and sealing strips should not be damaged.

7. Dust and sewage should be prevented from infiltrating into the colored window frame and glass surface along the edge of the window frame, and the window frame should be sealed with masking tape before construction.

8. After cleaning, wet the whole glass evenly with the installation glue for the first time, and then scrape the installation glue off the glass surface with an ordinary rubber scraper to completely remove the dust and sticky dirt left on the glass.

9. After spraying the installation glue evenly on the whole glass surface again, immediately float the film on the glass surface and slide it to the correct position.

10. Carefully and evenly scrape off most of the installation glue under the film with a special scraper tool to prevent moisture and air at the film edge from infiltrating under the film again. At the same time, make sure there is a gap on the edge of the glass or window.

1 1. After the glass is pasted, the surface of the pasted film and the window frame can be cleaned with a window film cleaner without ammonia ions.

12. During construction, local heating of glass is not allowed.

13, the sealant matching with the film can not be constructed until one month after the film is pasted.

14. Waterproof measures should be taken after glass film pasting construction to avoid rain affecting the drying of installation glue and sealant.

15. Splicing and edge fixing of adhesive film

16. When splicing glass films on glass, the joints should be symmetrical and coordinated with the surrounding environment, and there should be no visible color difference between the two pieces. The splicing method is as follows:

17, overlapping mode: the overlapping width should not be greater than1.5 mm;

Flat-fell seam method: the flat-fell seam width should be less than 0.5mm.

18. The edge of the building safety membrane should be fixed with the frame, and the fixing material should be neutral silicone sealants, so that the frame and the membrane can be firmly connected, and the connection width should not be less than12 mm. 。

Use and maintenance of household adhesive film

1. The film glass shall not be moved within 3 days after the film construction.

2. Do not scrub the film glass with water within 15 days after the film construction.

3. Don't use suction cups to hang or fix anything on the surface of coated glass.

4. Acetone or anhydrous ethanol can be used to remove the adhesive and other dirt adhering to the film.

5./kloc-After 0/5 days of film pasting construction, the window film can be scrubbed with glass cleaner and soft rubber scraper.

6. Do not use scouring pad, wire, brush and cloth containing sand to clean the film glass.

What are the advantages of home film, what is the construction process of home film, and how to maintain and use it in daily life after using it? These problems have been introduced in detail in the above article. The use of household film is very common, and different films have different characteristics. Making good use of home movies will make everyone's life better. There are many kinds of household films on the market, so you should consider what kind of household film you want before choosing.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~