How to dig Burmese jadeite?

How is the jadeite in Myanmar mining area dug up?

1, Myanmar jadeite raw stone mining depends entirely on experience and luck. I have no idea whether I can dig a better variety. I believe that jade gambling stone has aura. As long as I have good luck, I can dig a good jade. Although it is very hard, people are still the same year after year. The mining time of the jadeite rough stone mining area in Myanmar is from September to April of the following year.

2. Strange hand excavators and jade yard construction machinery (there are nearly 1,000 locally known strange hand excavators and 3,000 to 4,000 earth-moving vehicles), with large mining scale, many yellow sand and stones, frequent road diversions (roads are often cut off by jade digging companies), serious river sediment blockage and serious ecological damage, and the use of oil and explosives.

3. diving hole. Jade pickers wear a rope around their waist, a breathing hose in their mouth, an eye mask and a waterproof mirror, and dive into river waters with stones tied to them, and distinguish gravel from jade by touching their feet.

4. The jadeite placer in the highland gravel layer is a hill composed of stones, clay and jadeite. Workers first blow up the hard place with explosives, then lift the earth and stone with excavator bucket, and then slowly fall to one side.

5. The exploitation of jadeite is full of risks and bitterness: in Pagan area, mine accidents almost never stop because the management system of the mining area is not perfect. After long-term mining, the mining area has become a mess, with waste rocks piled up and vegetation destroyed, which greatly increases the risk of landslides.

How is jadeite mined and how to produce jadeite?

Relying entirely on manual excavation, the jade digger tied a rope around his waist, put on a breathing hose, put on an eye mask and a waterproof mirror, and sneaked into a river pond with stones falling from his waist. He found the original stone jade by touching his hands and feet, carried it ashore with a bamboo basket, distinguished the pros and cons and decided to abandon it.

Emerald can be mined in Myanmar. Speaking of the origin of jadeite original stone, it is of course Myanmar. Although there are many jadeite producing areas around the world, the quality is generally not high and the collection value is not high. Only North Myanmar can produce gem-grade jadeite. Mining jadeite raw stone in Myanmar is a job.

Flushing seedlings, this method is more suitable for areas with thin soil layer on the ground of mines. After the soil on the surface is washed away by water, the jade digger will use a water pump to sort it. If large stones are found, they will be identified after being sent out with shovels and crowbars.

The original jadeite stone is obtained by geological mining, which is generally carried out by advanced mechanized mining mode, so the mining scene of the original jadeite stone is very spectacular, and the quantity is relatively large, and there are jadeites of various qualities. There are four main mining methods of jadeite, namely, digging holes, opening ponds, flushing seedlings and salvaging.

How did Burmese jadeite come into being?

1, because the drifting Indian continental plate collided with the Eurasian continental plate 40 million to 50 million years ago. This force not only created the Qinghai-Tibet Plateau, but also provided high-pressure conditions for the formation of jadeite ore. Myitkyina area in northern Myanmar is endowed with unique advantages, and the pressure and temperature not only meet the requirements of jadeite mineralization.

2. Jadeite is a dense and massive aggregate formed by countless fine fibrous mineral crystallites, mainly jadeite. There are four main views on the formation of jadeite in nature: the desilication product of residual granite magma invading ultrabasic rocks under high pressure.

3. There is a view that the jadeite in Myanmar was formed by the extrusion of the Eurasian plate and the Oceania plate. Under the compression-torsion stress and low temperature caused by plate collision, albite first formed glaucophane schist with low metamorphic degree, and then became jadeite.

4. Because this place in Myanmar is in the violent geological movement at the junction of plates, many jadeite ores have been formed. The reasons for the formation of these jadeite ores are very complicated. There are so many jadeite mines in places like Myanmar that it is easier to form jadeite mines when the surface temperature is low, except for unique geographical reasons.

Jade with blood, compassion without tears, how the jade in Myanmar mining area was dug up.

Open the sluice and flush enough water from the reservoir directly into the cave at the foot of the mountain. Workers take advantage of the situation to start work on both sides, so that some jadeite buried in the shallow layer can usually show traces, and workers dig it out by hand.

Myanmar jadeite raw stone mining depends entirely on experience and luck. I have no idea whether I can dig a better variety. I believe that jade gambling stone has aura. As long as I have good luck, I can dig a good jade. Although it is very hard, people are still the same year after year. The mining time of the jadeite rough stone mining area in Myanmar is from September to April of the following year.

In the dry season in Shandong, jade diggers use the most primitive tools to dig deep into the ground like a well, then transport the stones to the ground and carefully select and identify the original jadeite stones. The construction of water tunnel can only be started in the dry season, and the method of "opening the pond" is adopted, and the jade digger digs horizontally and shallowly to open a pit the size of a fish pond.

How is the original jadeite stone mined? How to dig the original jade stone?

1, digging a hole is actually digging deep underground like drilling a well. If the stones are small after digging, transport them to the ground with hanging baskets, and then carefully select and classify them. If it is a relatively large stone, it will lead water to the bottom of the cave and wash away the sediment on its surface to see if it is jadeite.

2. The jadeite placer in the highland gravel layer is a hill composed of stones, clay and jadeite. Workers first blow up the hard place with explosives, then lift the earth and stone with excavator bucket, and then slowly fall to one side.

3. Method 1: "Chong Miao" Literally, we can also have a certain understanding of this jade mining method. The so-called "seedling flushing" means washing away some exposed mineral deposits with water. Workers followed the water to pick and choose, and when they saw a big stone leaking out, they quickly dug it out with a shovel.

4. There are usually four methods to mine jadeite, such as seedling washing, salvage, pit digging and pond opening.

Mining method of jadeite in Myanmar

1. Jade mining. After 1990s, the Myanmar government brought jade mining into management, and the land was auctioned by the government, only registered companies could enter. The mined stones must be registered and taxed, and then transported to Yangon for public auction before they can be exported by sea.

2. The jadeite placer in the highland gravel layer is a hill composed of stones, clay and jadeite. Workers first blow up the hard place with explosives, then lift the earth and stone with excavator bucket, and then slowly fall to one side.

3. The mining time of the jadeite original stone mining area in Myanmar is from September to April of the following year. The rest is rainy season, potholes and hot climate, which makes life and excavation very difficult.

4. Emerald can be mined in Myanmar. Speaking of the origin of jadeite original stone, it is of course Myanmar. Although there are many jadeite producing areas around the world, the quality is generally not high and the collection value is not high. Only North Myanmar can produce gem-grade jadeite. Mining jadeite raw stone in Myanmar is a job.