Responsibilities of measuring and setting-out personnel

Responsibilities of measuring and setting-out personnel

In the process of engineering construction, surveying and setting out is the most important. So, what are the responsibilities of the survey and setting-out builder? Let's have a look.

operating duty

A, familiar with drawings, carefully understand, review drawings before implementation, and confirm the accuracy of punctuation and marking of drawings.

Second, strengthen the management process of construction survey control, and carefully review the baselines and points (including coordinate points and leveling points) handed over by Party A or the design unit.

Three, according to the needs of construction, reasonable arrangement of field survey control network, and closed survey according to the requirements of specification.

Four, strictly control the accuracy of measurement, measuring instruments and tools, according to the relevant requirements of the national measurement management, regular performance or inspection.

Five, measuring instruments should be regularly checked and calibrated when in use. If the instrument is found to be inaccurate or accidentally dropped or collided, it should be stopped immediately and sent to the designated measurement and testing institution for identification and maintenance.

Six, do a good job in the custody of measuring unreeling instruments and their accessories and tools to ensure their effectiveness.

work summary

Time flies, it has been a year since I came to the * * * project department. Looking back on my work in the past year, with the support and help of company leaders and colleagues, I have been strict with myself and completed my work well according to the requirements of the company. Through one year's study and work, the working mode has made a new breakthrough and the working mode has changed greatly. Now I will summarize my work for more than a year as follows. I came to the * * * project department this year as a civil engineering pay-off technician. This is both an opportunity and a challenge for me. Because everyone is new to the initial project, the workflow, working mode and working method of each other and the whole project department are not very clear, and there is a lot of pressure at first. In this case, in order to do a good job, I am not afraid of trouble, ask the leaders, learn from my colleagues, and explore the practice myself. In a short time, I became familiar with the work, completed the role transformation process, defined the working procedure and direction, improved my working ability, and formed a clear working idea in specific work, so that I could carry out my work smoothly and finish my work skillfully and successfully. Engineering construction is a process of transforming designers' thoughts from ideology to material form according to design drawings. To do a good job in engineering construction, we must first be familiar with the construction drawings, master the designer's intention, complete the process of understanding the design intention from the drawings and then go back to modify the drawings (that is, complete the joint review of the drawings before construction), then strengthen the understanding of the drawings, familiarize ourselves with the basic situation of the project, consider the specific construction plan, and preliminarily clarify the key points and difficulties of engineering and technical construction, so as to prepare for the future construction operation.

In the process of engineering construction, surveying and setting out is the most important, which runs through the whole engineering construction and is the soul of engineering construction. The project must be done well, and the survey and setting-out work must be done well, so the procedures of measurement, proofreading and rechecking must be indispensable (the survey and rechecking work must not be done by the same person); Secondly, it is necessary to proofread each construction layer, construction section and construction point in combination with a full set of drawings to avoid missing a small part of the project; Thirdly, it is to check and implement whether the understanding of the actual operation layer of the project is consistent with your own ideas, communicate in time when problems are found, and prevent problems before they happen.

After the construction of a certain engineering section is completed, it is necessary to check and accept it in time, sum up experiences and lessons, correct the problems found in the next construction section in time, and reduce the continuous occurrence of errors.

Engineering construction is a very rigorous work, and engineers and technicians must carve it as their own artistic products, strive for perfection, have a good work style, work with a responsible attitude towards the country (not wasting resources), society and owners, and have the determination to "do a project, build a monument and win a reputation" in order to do a good job and become a qualified project.

Engineering construction is a group work, which cannot be completed by one person or several people. This is a complicated job, which requires the close cooperation of quality inspection stations, design institutes and workers. Therefore, it is particularly important to do a good job in mutual contact and cooperation, otherwise, doing a good job in the project will become an empty talk. ? As the saying goes, if a migrant worker does not consider the economic benefits of his boss and company, he will ruin his future, and he will not be a qualified migrant worker and will be eliminated by society sooner or later.

A person's ability and energy are limited. In order to better understand the drawings and specifications correctly, frequent communication and asking for instructions in advance can avoid many unnecessary arguments and rework, unify everyone's thinking, and make the project meet the planned requirements smoothly and on schedule.

Although I am young, with little work experience and limited construction experience, I will give full play to the advantages of young people, such as studious, diligent, energetic, make up for the above shortcomings, ask questions diligently, strive to become an excellent technical talent and do my part for the development of the company. I like my major and I love my post even more. I believe that under the guidance of Party A and the Engineering Department, the * * * project can be successfully constructed and the completion acceptance task can be successfully completed according to the contract requirements.

;