Why is it not recommended to install a windpipe loader?

It is not recommended to install the air duct loader, because of the high power consumption, expensive price, troublesome installation, poor aesthetics, inconvenient after-sales maintenance, poor heating effect, high noise, high energy consumption and easy leakage of pipes and air outlets.

First of all, the biggest drawback of the air duct machine is power consumption. Although it looks small and beautiful, because it is in the form of multiple delays, as long as one of them is turned on, the outdoor unit will run. Compared with ordinary hanging air conditioners and cabinet air conditioners, the power consumption of air duct machines is still very large.

Secondly, a 3P ventilator, including machinery, materials and labor, is equivalent to the price of a high-end cabinet machine. Because it is installed in the ceiling, it will cost more for the ceiling.

Moreover, the ventilator is installed in the ceiling like the central air conditioner. Air duct air conditioning is a fixed frequency technology, which adopts one-to-one mode, so it requires a lot of locations of external machines and is also very troublesome.

Precautions for installing air duct machine:

1. communicate with the designer before installing the air duct machine, such as installation location and thickness, so as not to affect the normal use of the air duct machine.

2. The hole in the wall should be aimed at the outlet of the air duct machine to ensure smooth water flow after the outlet is connected with pvc pipe, and the outlet pipe should be inclined.

3. When installing the indoor unit, pay attention to the outlet end of the drain pipe, which is conducive to the discharge of condensed water.

4. When installing the air duct machine, be sure to cover the heat insulation cotton on the copper tube, then pass the wire through the yellow wax tube, and finally wrap it with tape.

5. The installation power supply of the air duct machine shall comply with relevant safety standards and requirements, and at the same time ensure that the power supply wiring is correct and reliable to avoid safety accidents.