How to start an EVCARD car?

The steps for starting an EVCARD car are as follows:

1. Fasten your seat belt and put the gear in P; step on the brake and push the key to the end (usually there is a key or power supply) There are two starting methods for the start button: if you have the key, turn the key, and if you have the power button, press the power button).

2. When you hear three "thump thump thump" sounds from the car body, wait until the green word READY is displayed on the instrument panel and there are no yellow warning lights on the instrument panel. The word "ready" is displayed, which proves that the car has started successfully.

3. Check the cruising range and lighting equipment: The mileage display position is on the left side of the instrument panel screen where the battery is correctly displayed to ensure that the battery is sufficient for the driving distance; lighting equipment is generally located on the left side of the steering wheel, commonly used ones are Check and adjust the left turn signal and right turn signal respectively to see if the lighting equipment is intact.

4. After the vehicle is started, shift the gear to D, release the brake, and step on the accelerator pedal appropriately. If you find that the car starts to move, it proves that the start is successful and the vehicle can drive normally.

Reference materials:

Baidu Encyclopedia - EVCARD

EVCARD official website