How to set the tapping of the second spindle in Mitsubishi system

Setting the tapping of the second spindle of Mitsubishi system can be carried out according to the following steps:

1. Determine the parameters of tapping: First, determine the size and type of tapping, including thread diameter, pitch and tooth type. These parameters can be determined according to the specific requirements and the requirements of the workpiece.

2. Setting the spindle speed: according to the tapping type and material, choose the appropriate spindle speed. Generally speaking, proper tapping speed should be selected to ensure cutting effect and tool life.

3. Set the feed speed: select the appropriate feed speed according to the tapping size and material. Too fast feed speed may lead to chip accumulation, and too slow feed speed may lead to increased tool wear.

4. Setting the cutting depth: according to the tapping size and the requirements of the workpiece, determine the appropriate cutting depth. Generally speaking, the cutting depth should be gradually increased to avoid excessive tool wear.

5. Set coolant: For the cutting heat problem during tapping, coolant can be used for cooling and lubrication. Coolant can effectively reduce cutting temperature and prolong tool life.

To sum up, setting the second spindle tapping of Mitsubishi system needs to determine tapping parameters, spindle speed, feed speed, cutting depth and coolant. The rationality and accuracy of these settings will directly affect the tapping effect and the quality of the workpiece. Therefore, the setting needs to be adjusted and optimized according to the specific situation to achieve the best tapping effect.