How to set up Fiji K2 router?

How to set up Fiji K2 router? In fact, many routers have similar internet access settings, and some just have different addresses for logging in routers. So how is Fiji K2 set? Let's take a look at Bian Xiao!

I. Connect the Fiji K2 router.

1, Fifi K2 wireless router has five network cable interfaces: 1 WAN interface and four LAN interfaces: LAN 1, LAN2, LAN3 and LAN4.

2. The WAN interface is connected to the cat; The computer can be connected to any interface of LAN 1, LAN2, LAN3 and LAN4 with a network cable.

note:

After the 1. Fiji K2 router is connected correctly, the computer is temporarily unable to access the Internet. After this Fiji K2 router is successfully set up, the computer can automatically access the Internet.

2. When setting up the Fiji K2 router, you don't need a computer to access the Internet. As long as the connection is correct, you can use a computer browser to open the settings page of Fiji K2 router.

Second, set the computer IP address.

Before setting up the Fiji K2 router to surf the Internet, you need to set the IP address as "Automatically obtain IP address" in the local connection of the computer, as shown in the following figure.

Third, set up Fiji K2 router to access the Internet.

Open the settings page

Open a browser on your computer and display the location of the URL at the top of the browser. Enter: p.to or192.168.2.1-and click "Experience Now".

Select "Internet Access Mode"

"Internet access mode" is determined by the type of broadband service handled by users. Therefore, in Fiji K2 routers of different users, the choice of "Internet access mode" is different. If the Internet Access Mode is selected incorrectly, you will not be able to access the Internet after setting. Let's teach you how to judge the broadband at home.

Broadband account

When you open broadband service, the operator will provide you with "Internet account" and "Internet password". And when the router is not used, the computer needs to use "broadband connection" to dial, and the computer can access the Internet only after successful dialing.

If your broadband is consistent with the above description, you should choose a broadband account, fill in the account: Internet account-password-then set the wireless name and wireless network password-and click Finish.

Automatic detection and tracking

Without using a router, the computer can automatically surf the internet after connecting to the cat. If your broadband is consistent with the above description, you should select "Internet access mode" in Fiji K2 router: automatically obtain it-then set "wireless name" and "wireless network password"-and click "Finish".

Static address

When broadband is enabled, operators will provide static IP, subnet mask, default gateway, preferred DNS and alternate DNS addresses. When a computer accesses the Internet without using a router, it is necessary to fill in the static IP, subnet mask, default gateway, preferred DNS and alternate DNS address provided by the operator in the local connection. Then the computer can surf the internet.

If your broadband meets the above description, then the "Internet access mode" in Fiji K2 router should choose: static address. Then fill in the IP address, subnet mask, default gateway and DNS server provided by the broadband operator-set wireless name and wireless network password-and click Finish.

Automatic restart router

Fiji K2 router will automatically restart. If the previous settings are correct, then after restarting, you can surf the Internet normally.

Fourth, check whether the setting is successful.

1. After restarting, the login page will automatically open-enter: admin-click the "Login" button and log in to the setting page of Fiji K2 again.

Note: If the Fiji K2 router is restarted, the browser will not automatically open the login page. Please manually enter: p.to or192.168.2.1open in the browser address bar.

2. Click "Equipment Information", as shown in the figure below.

3. Check the "WAN Port Status" to determine whether the setup of Fiji K2 router is successful.

If there are IP address parameters behind the IP address, subnet mask, default gateway and DNS server under the WAN port status option, it means that Fiji K2 router has been successfully set up and can surf the Internet normally.

If all zeros are displayed after the IP address, subnet mask, default gateway and DNS server under the WAN port status option, it means that the setting of Fiji K2 router is unsuccessful and it is impossible to access the Internet.

Verb (abbreviation of verb) abstract

If your Fiji K2 router has been set up before, you can press and hold the WPS/RESET key next to the power socket for about 10 seconds to restore the factory settings, and then set it according to the method in this article. It is suggested that you call the broadband customer service phone to inquire about your broadband "Internet account" and "Internet password" information to ensure that the information filled in the router is correct.

Heart of the King 2 Click on the demo.