How can there be good and bad relief in the carved area?

There may be several reasons why the relief effect in the carving area is good or bad:

Selection of boundary curve: boundary curve is one of the key factors affecting the relief effect. If the outline of the closed curve is irregular, or there is self-intersection or overlap, the relief effect will be poor. Therefore, when selecting the boundary curve, it must be carefully checked to ensure its accuracy and quality.

Relief parameter setting: Relief parameters include section shape, reference height, side angle, etc. The setting of these parameters will also affect the relief effect. If the parameters are set incorrectly or inappropriately, the pressure relief effect may be unsatisfactory.

Skilled in operation: The operation of engraving software requires certain skills and experience. If the operation technology is not skilled enough, there may be errors or inconsistent results.

Quality of equipment and materials: carving requires high-quality equipment and materials. If there are problems with the quality of equipment and materials, the disaster relief effect will be affected.

Therefore, in order to improve the regional relief effect of fine carving, we must optimize and improve the selection of boundary curve, the setting of relief parameters, the proficiency of operation technology and the quality of equipment and materials.