What is the printing guide length of Toyo automatic rotary screen printing machine in Japan?

The belt length of automatic rotary screen printing machine varies according to the number of printing equipment. If the circumference of standard rotary screen is 64.2 cm, the belt length occupied by each printing equipment is about 60-65 cm.

The belt length occupied by the cloth feeding device and the cloth discharging device is about 1- 1.5m respectively. Multiply the number of printing sets of the whole machine by 0.65, and then add 1.5+ 1.5 to get the length of the working face of the printing machine.

If you need to calculate the circumference of the whole belt, you can multiply it by 2.25.

This is a rough figure, because each machine has different kinds of additional equipment, and the manufacturer will lengthen or shorten the length of the belt appropriately according to the situation.

Calculation of belt length of planographic printing machine;

There is no fixed length for the belt of any planographic printing machine, because the screen printing pattern of planographic printing is designed according to the different requirements of different customers. Generally, the maximum pattern length multiplied by 1.5 times the total number of printing sets, plus the front and rear feeding/discharging devices (about 3m) is the total length of the printing table, and then multiplied by 1.25 is the total length of the entire printing belt.