Responsibilities of laboratory technicians

Responsibilities of laboratory technicians (General 12)

In today's social life, various job responsibilities frequently appear, including the scope of work, the responsibility to achieve work goals, the working environment, job qualifications and the relationship between various jobs. So, have you mastered the format of job responsibilities? The following is the job responsibilities of the chemist (GM 12) that I sorted out for you. Welcome to read, I hope you will like it.

Chemist's responsibilities: 1 1, responsible for the laboratory work of the group company and the company.

2, laboratory personnel in chemical experiments, must strictly abide by the operating rules, to avoid all kinds of accidents.

3, carefully record the chemical experiment, correctly handle and sort out the test data.

4. Fill in the test report correctly, so that the project is complete, the handwriting is clear and correct, and there are signatures of experimenters and testers. Important chemical inspection items and inspection reports sent to units outside the group company must be signed by the section chief or competent leader.

5, laboratory personnel should take good care of the instrument, and do a good job of maintenance.

6. Provide accurate and reliable analysis reports for the experimental research of new technologies, new materials and new products of the company and the group company.

7. In accordance with the relevant regulations, do a good job in the collection, storage and safe use of chemicals, especially the storage of highly toxic, explosive, concentrated acid, alkali and other items, to prevent the loss and damage of chemicals, so as not to endanger personal safety.

8. Professional technicians are responsible for the technical guidance of other personnel in this room and the verification of important test results. The verification of phosphating solution can be carried out by the operator himself.

9. Be responsible for the inspection results.

10, complete other work assigned by the leaders.

Responsibilities of Laboratory Technician 2. Carry out inspection and analysis according to the inspection methods and standards of each inspection item, be familiar with the operating procedures of the instruments and equipment used, and fill in the working conditions of the instruments and equipment carefully and record them.

Second, fill in the sample handover form carefully.

Three, abide by the analysis and measurement control procedures, fill in the original inspection records, ensure the accuracy and reliability of the analysis data, and be responsible for the inspection quality.

Four, found abnormal test results, to find the reason, to determine the sample, and promptly report to the person in charge.

Five, do a good job of cleaning laboratory equipment, classified storage, keep the room clean and tidy.

Six, study hard business knowledge, study hard detection technology, explore the analytical methods mastered, and constantly improve the detection level.

Seven, consciously abide by the rules and regulations of the factory, stick to their posts, pay attention to safe operation, and check whether the water, electricity, doors and windows are closed before coming off work.

Eight, familiar with the relevant laws, regulations, standards and rules and regulations of sewage treatment, testing and discharge, strictly abide by professional ethics, and do a good job of testing in a realistic way.

Job responsibilities of laboratory technicians 3 1. Every day, the water quality in the boiler should be sampled and tested to ensure that the water quality is qualified.

2. Use a burette to extract boiler water to determine the alkalinity of boiler water, with no more than 20 drops per day.

3. Test the hardness index of soft water with test paper. The standard is PH value, which can't exceed 7, and can't exceed 0.3 when measured by hydrometer.

4. If the measured water quality exceeds the standard, replace the salt and backwash the ion exchanger with salt. It can only be used normally after it is washed qualified.

5, after the test to clean up all kinds of instruments, reserve samples, salt, etc. , reasonable collection.

6. Determine the PH value of the water in the desulfurization pool and report the measurement results to the superior monitor on duty in time.

7, do a good job of inspection and maintenance of water quality treatment equipment.

8, completes the temporary tasks arranged by the superior leadership.

9, make records every day after the test, succession seriously.

Chemist's job responsibilities 4 1, responsible for the inspection of raw and auxiliary materials, packaging materials, semi-finished products and finished products;

2. Make inspection records carefully and correctly handle and sort out inspection data;

3, strictly implement the registration procedures of measuring instruments and inspection equipment, establish ledger files, so that the accounts are consistent;

4. Supervise the production work. Strictly follow the process documents and quality control procedures to help production workers analyze the causes of quality problems;

5. Non-conforming products shall be identified, recorded, evaluated and isolated as required, and disposed of;

6. Issue inspection report and be responsible for the correctness of the report.

Chemist's responsibilities 5. Chemist's responsibilities of water quality testing center:

1. Seriously implement the water quality standards and be responsible for the correctness of the test results; Complete the inspection task on time to ensure the smooth progress of the production task.

1. Actively participate in various assessments to ensure the accuracy, scientificity and fairness of data; Fill in the original inspection records carefully to ensure that the figures are accurate and the handwriting is clear.

3. Operate the instrument in strict accordance with the operating rules of the instrument, keep the use records and daily maintenance of the instrument, and keep the testing room and surrounding environment clean and tidy.

4. Major quality problems should be reported to the competent leader immediately, so as to take timely measures to reduce losses; In case of emergency and customer service hotline, accept instructions and show up at the scene for testing in time.

5. Cooperate with the internal audit work of the internal audit team and implement the rectification of the corrective measures proposed by the internal audit team.

6. Keep all kinds of records, that is, technical conditions, confidential during the test of this site.

7. The director of the collaboration room provides the purchasing plan of instruments, equipment and consumables.

8. Waste residue, waste liquid, waste culture medium and toxic and harmful substances produced during the experiment shall be treated according to relevant regulations.

9. Seriously participate in training and study, and strive to improve their overall quality.

10. Complete other tasks assigned by the leaders.

Workflow of Chemists in Water Quality Testing Center

1. Sample detection and analysis process:

After receiving the water sample, the relevant testing room shall analyze the sample according to the items in the testing task list, the detailed rules for the implementation of water quality testing in 20xx and the standard methods issued by the state, industry and Ministry. When testing, the original records and inspection reports of the tested items should be filled in according to the requirements of Record and Data Control Procedure, and submitted to the director of the room after signing, and then submitted to the quality director after being audited by the director of the room.

2. On-site detection and analysis process

First, prepare drugs, standard samples and instruments for field use; Secondly, according to the water quality detection method of this station, the water quality of the roof is detected to ensure the accuracy of the detection results. Finally, review the test results, issue a report and fill in the field records.

Chemist 6 1 job responsibilities, product inspection, inspection record management, submitted to the superior leadership;

2, found that the product is abnormal or does not meet the requirements, issue a nonconformity report;

3, master the product acceptance criteria, and identify the product status and product traceability;

4. Management and maintenance of laboratory instruments and equipment

Responsible for the ordering and follow-up of packaging bags, and make inspection reports.

6. Complete other tasks assigned by the leaders on time, and be responsible for tracking.

Responsibilities of laboratory technicians. Working principles of laboratory technicians: objective and fair, seeking truth from facts, rigorous and honest, and ensuring the quality of raw materials and products.

2. All quality inspectors should follow the sampling rules.

3. Responsible for sampling and sensory inspection of incoming raw materials.

4. Responsible for the inspection and testing of finished products and raw materials.

5. The routine inspection items of each batch of raw materials shall be carried out according to the relevant provisions of raw material acceptance standards.

6. The original records of each batch of raw material test and finished product test are loaded into the file and clearly available.

7. Summarize the test results in time every day and record them in the designated file. In principle, the finished products and raw materials produced every day must be tested on the same day and reported to the section chief.

8. All laboratory records shall not be changed at will. If a small amount of data needs to be corrected, you should cross the original data and write the correct number next to it, so that you can clearly identify the original data.

9. The original records of all standard liquid preparations are clearly identifiable.

10. Chemists should be responsible for their own test results. Therefore, the test name must be marked after the test record.

1 1. Chemists should have a correct understanding of their test results. If they doubt their own testing for special reasons, they should report to the department head in advance to prevent quality accidents.

12. Do a good job of keeping the samples of raw materials and finished products on that day and stack them neatly in the sample cabinet.

13. Observe and record the observation records of finished products.

14. Make monthly quality reports of raw materials and products on a regular basis.

15. Keep the laboratory clean and tidy. At the end of the test, ensure that all instruments are cleaned according to the specified requirements. The laboratory work platform must be cleaned once a day. All laboratory instruments shall be placed in an orderly manner and shall not be piled up at will.

16. Complete other tasks assigned by company leaders.

Responsibilities of laboratory technicians. Seriously study the national standards for grain and oil inspection and relevant laws, regulations and operating procedures.

Two, responsible for sampling, inspection and testing of grain and oil in and out of the warehouse, and issue a quality inspection report according to the inspection results.

Three, the chemist according to the national grain and oil quality standards, in accordance with the warehouse for each batch of grain and oil purchase, delivery quality regulations, do not meet the quality standards of grain and oil to refuse to accept, and promptly report to the leadership.

Four, the use of inspection and testing equipment, to do a good job of maintenance, to ensure the accuracy of inspection and testing data.

Five, the use of dangerous drugs and toxic reagents, should be used in accordance with the operating procedures and precautions, to do a good job of keeping all kinds of drugs and reagents, to ensure safety.

Six, do a good job of quality appraisal twice a year, and submit the inspection results to the library leaders in time to provide a scientific basis for the rotation of grain and oil reserves, and ensure that the grain and oil reserves are always new.

Seven, complete other tasks assigned by the superior.

The duties of a laboratory technician. Chemists should consciously abide by the company's rules and regulations, stick to their posts, check their daily work on time and accurately, and ensure the fairness and seriousness of the inspection work.

2, laboratory personnel must be in strict accordance with the current quality standards for sampling, inspection, calculation or judgment, etc. Pay attention to observe various phenomena in the experiment, make original records in time, and strictly prohibit scripted or rote learning, change inspection standards and make subjective conclusions without authorization, and strictly control the quality.

3. Complete the inspection work on time, and achieve "three in time" (timely sampling, timely inspection and timely report) and "five in accuracy" (accurate sampling, accurate instrument, accurate analysis, accurate record calculation and accurate report).

4. The inspection of the original records should adhere to the principle of seeking truth from facts. The original records are true and complete, and they should be responsible for the inspection results and conclusions, and the confirmer should sign them.

5, laboratory personnel should be familiar with the test methods of the tested samples, skilled use of relevant pharmaceutical reagents, should be carried out in the designated area, and pay attention to the safety of operation, to prevent errors and accidents. Skillfully use all kinds of testing instruments and equipment, take good care of them, check them regularly, and do a good job in cleaning and maintenance.

6, at any time to the relevant departments to reflect the quality problems, and put forward suggestions.

7, strengthen learning, and constantly improve the technical level, do a good job of technical data collection, storage and archiving.

8. Laboratory personnel should take turns to clean the laboratory. Daily cleaning contents include: desktop (chemical composition, instrument composition), dust on instrument surface, floor cleaning and mopping. Pay attention to safety, fire and theft prevention. Dress according to the regulations at work and do a good job of personal hygiene.

9, laboratory personnel have the responsibility to buy reagents, instruments and appliances used in the analysis, and sign when buying.

10. The standard reagents commonly used for analysis are prepared by analysts in turn. If it is impossible to prepare for leave or business trip, the personnel on duty will prepare it, which is not included in the rotation. In the process of preparation, it is the Lord's turn to prepare, and others assist in preparation. Division of responsibilities: the main distributor is responsible for 80% and the auxiliary distributor is responsible for 20%. Assist the main distributor, check the results and sign them. The prepared standard solution should be labeled, indicating the name, concentration, preparation date, expiration date, main dispenser, auxiliary dispenser and other information.

1 1. Laboratory personnel take turns to add liquid, calibrate, record and sign Karl Fischer for moisture analysis in the production workshop every week. Confirm the error range of gas chromatography. When the error range of gas chromatography exceeds 0.2% and there is no other reason, the machine must be debugged, and the debugging results should be taken care of by yourself, recorded properly, and confirmed and signed by the personnel on duty in the distillation column.

12. Before leaving the analysis room after work every day, pay attention to water, electricity, gas, doors and windows, and take all safety precautions (except in special circumstances).

Lab technician job responsibilities 10 Lab technician job responsibilities In order to standardize lab technician job procedures, clarify lab technician job responsibilities, and improve lab technician job responsibility awareness, the following provisions are formulated.

1. Chemists should be familiar with the relevant laws and regulations, industry policies, national and industry standards of the industry, and carry out testing work in strict accordance with the existing effective technical standards at all levels.

2. Chemists should receive relevant job training, hold relevant certificates after passing the examination, and be familiar with the testing items carried out in our laboratory. Continuously improve business level and operational skills.

3. Chemists should consciously accept the assigned detection tasks and carry out detection work in time according to appropriate standards and analytical methods.

4. The laboratory technician shall be responsible for the reported inspection results, ensure the authenticity, accuracy and reliability of the inspection results, and fill in the use records and original records of instruments and equipment carefully, so as to ensure the accuracy, completeness and clarity of the records and ensure the reproducibility of the inspection process.

5. Chemists should be familiar with the operation methods and maintenance knowledge of various instruments and equipment used in the detection process, and operate according to the specifications.

6. Laboratory technicians are responsible for receiving, storing and circulating the designated samples during the testing process, and are responsible for the validity, integrity and representativeness of the samples.

7. Chemists are responsible for preparing all kinds of reagents and standard solutions used in testing projects to ensure their effectiveness, regularly calibrating the standard solutions to ensure the accuracy of their concentrations, verifying them with standard samples and making relevant records.

8. Chemists should monitor the laboratory environment at any time to eliminate the harmful effects of environmental factors on the test results, and make relevant records.

9. All kinds of drugs, reagents, consumables and labor protection articles used in the inspection process should be used correctly and reasonably to prevent waste, and must be registered when receiving.

10, the laboratory technician should do a good job of housekeeping in the laboratory to ensure that the table and floor of the laboratory are clean and tidy, and the experimental instruments are placed in an orderly manner. Waste gas, waste liquid and solid waste generated by the experiment should be discharged or discarded after proper treatment.

Responsibilities of laboratory technicians 1 1 1. Carefully do a good job in water quality testing, effectively control the quality, and ensure that the water quality of ex-factory products is 100% qualified.

Two, every day in the finished product packaging workshop or barrel workshop sampling inspection. During operation, the straw is cleaned with sterile water first, and then put into the pressure cooker for disinfection to ensure that the whole test process is completed in a sterile state.

Three, found that the test results exceed the standard or there are signs of exceeding the standard (less than three Escherichia coli per 100 ml, and the number of bacteria per ml is less than 100), to directly sample the water treatment for further testing, and analyze the reasons.

Four, after the test results come out, we should carefully fill in the test sheet, so that the figures are accurate and the information is complete, and send it to the leader in charge of production for signature.

Five, the laboratory instruments should be cleaned in time after use, and the laboratory room should always be kept in a good sanitary condition, so that the windows are clean and spotless.

Six, in addition to the water quality test work, according to the needs and leadership arrangements, complete the finished product packaging and other tasks.

Responsibilities of laboratory technicians 12 Responsibilities:

1, carry out daily inspection work under the leadership and guidance of the director;

2. Analyze the collected project specimens, and get effective data according to the test results, so as to provide effective basis for clinic;

3, undertake specimen processing, registration, technical operation, inspection results and other inspection work; Manual preparation of special reagents; Responsible for the daily maintenance and regular inspection and calibration of instruments to prevent all kinds of errors and accidents;

4, responsible for the professional quality control work, strictly implement the inspection rules and regulations and technical operation procedures.

Requirements:

1, graduated from medical laboratory, with the qualification certificate of medical laboratory technician (division);

2, skilled operation of inspection instruments, and understand the basic situation of inspection;

3. Have a good learning attitude, be serious and responsible, and have a team spirit.

;