Monthly work summary of equipment maintenance

Summary of equipment maintenance work in XX month The equipment maintenance work in XX month in 20xx year is coming to an end. This month's equipment maintenance work is mainly reflected in the aspects of base station power supply guarantee, patrol inspection, fault handling of base station and repeater, etc. Now the main work of this month is summarized as follows, and I won't elaborate here.

existing problems

The base stations newly built in 1 and 20XX and the base station of village-to-village communication project have not been accepted for various reasons, and the problems existing in the accepted base stations have not been rectified.

2. The problems reported this month have not been solved, such as the window seal of Gequan pharmaceutical base station will collapse, the door and nose of the base station will be welded off, and so on. If the above problems cannot be solved by the center, report them to the maintenance center for solution.

Summary of base station equipment maintenance this month

1. The base stations that have not been inspected so far this month include Hongqi Village-Hongliuhe, Masako Spring, Shaer Station, Baishanquan, Tugragen, Ya Mine, Cihai, M 1033, Nanjinshan and Changhe Group Copper and Gold Mine.

2. (Power supply in Shannan region) This month, six solar base stations on the west line of Hami will be guaranteed to supply power for more than 480 hours eight times, three solar base stations on the south line of Hami will be charged for more than 220 hours seven times, and six solar base stations on the east line will be charged for more than 240 hours four times. In addition to solar energy base stations, base stations such as gymnasium, Baiyanggou, Red Star No.2 Ranch, Red Star No.4 Field and No.2 Field Company will be charged. The charging time this month is about 970 hours.

3. Cooperate to complete two surveys of 33 base stations in urban areas, one in terms of space, power supply, storage battery, etc. There is also a base station transmission equipment. I hope this kind of work can be done together in the future, saving time and unnecessary waste of resources.

4. This month, we completed the replacement of the old carrier frequency at Mountain Area 1 No.2 and the faulty carrier frequency at No.2 Ranch, as well as the temporary expansion of Dun Station, Hongdu Station and Room 13, and the idle carrier frequency and capacity reduction of some base stations.

5. Cooperate to complete the entrance guard installation of the new base station in 2009.

Cooperate with the network optimization center to complete the antenna adjustment of some base stations in the city. Summary of maintenance work of tower antenna feed this month

1. This month, the verticality inspection of the antenna, cable and tower of the base station in Bailifeng District 14 of Hami West Line was completed, and the feeder card was filled in or tied and fixed in time.

2, complete the telecommunications * * * Enjoy our tower, whether the equipment installed on our tower is standardized, whether it affects our communication facilities and so on.

3. Reinforce the simple brackets of base stations in two cities, namely, the railway station and the municipal court, replace all brackets originally tied with cable ties, and check and fix cables.

In addition, several base stations, such as Fiona Fang Hotel in the urban area, were inspected accordingly. Repeater and indoor distributed base station maintainer summary Repeater and indoor distributed base station maintainer summary

1, this month's repeater and indoor distribution maintenance work mainly showed fault handling, which failed to be fully inspected during repeater inspection.

2. Complete the debugging of frequency selective repeater on Hami East Line, and install and debug the monitoring card of city repeater.

3. Complete the troubleshooting of repeater equipment such as Mutoujing, Naomaohu Annex, Baishan Molybdenum Mine, Regional Hotel, Xiagou Reservoir, Shadunzi, Huadian Building and China Railway Fourth Bureau. Internal Training There was no internal training in technical training this month. Instead, they learned about safety in production, protecting the safety of maintenance personnel, ensuring the safety of equipment and preventing vehicle accidents, so that maintenance personnel put safety in production and preventing accidents in the first place in any work.

Article 2:

According to the instruction of XX Center, there was no accident activity in the second hundred days of 20xx. The guiding ideology of the activity is to adhere to the principle of safety first and prevention first, and firmly establish Scientific Outlook on Development; Adhere to the goal of creating an intrinsically safe enterprise and further improve the construction of environment, quality and responsibility; Adhere to the strategy of developing Xing 'an through science and technology and developing Xing 'an through business, and improve the level of production safety guarantee; Adhere to safety education and training, and comprehensively improve the safety technical quality of employees; Adhere to be prepared for danger in times of peace, combat arrogance, break the routine, ensure safety in production, and achieve zero March. The specific work is as follows

1. Equipment maintenance: in XX years, each branch factory stopped production for less maintenance time, and three maintenance classes repaired the equipment.

40 maintenance tasks were completed, including 8 first-class maintenance tasks, 8 second-class maintenance tasks and 24 third-class maintenance tasks. Overhaul projects include: replacing the toothed roller, toothed plate and toothed roller bearing of the 360 crusher in Daliuta Plant, 3 12 bucket elevator, and 3 16, 427, 428 and 429 clean coal screen welded beams; The whole machine of 308 screen in Shangwan Factory was replaced, the reducer in the groove of 3 19 filter press was replaced by scraper, and the screen of 22 1 screen was welded; Lian Bu Iron Tower Factory 305 screen machine welded the vibration exciter beam and screen bar, 329 screen machine punched the crack stop hole, and scraper replaced the reducer and input shaft oil seal; 827 in Jialiang Plant, 4 14 high-frequency screen frame beam was welded, 406 clean coal screen vibration exciter beam was welded, 303, 305 and 323 screens were cracked, 465 crusher was replaced with toothed roller, and 4 12 magnetic separator was replaced with magnetic roller; The scraper, chain, upper and lower slideways and head and tail wheels were replaced in 304 shallow trough of Wulan Mulun Factory, and the reducer was replaced in 2 13 scraper, and so on. The first, second and third maintenance classes also use the time not to go out for maintenance to weld the toothed roller and the process air duct.

In XX, due to many non-standard processing tasks and tight time, the equipment to be repaired is short of spare parts, and there are relatively few old waste equipment, with 9 pieces. When the non-standard processing is full, the factory has completed various tasks by reasonably arranging off-duty and allocating tasks to squeeze time. The main production and processing are: shallow trough bottom plate, three speed bumps installed on the highway, Shangwan Wuxi Sunxi air duct about 120m, 24 support frames, 6 qualified coal quality tests, 20 air conditioning covers, 6 fleet radiators and 6544 drum covers of Yushu magnetic separator. Items added by the machine. In addition, there are more than 30 processing projects, which save a lot of money, reduce costs, improve the operating efficiency of central equipment, and provide a strong guarantee for the normal and orderly production.

2, basic management: XX month according to the requirements of the center, pay close attention to team building, team basic management.

The construction work should be detailed to every link, the basic information of team building should be sorted out, and the activity records and learning records of the safety team should be increased. Strengthen the assessment of teams and groups, refine the assessment standards of teams and groups, and implement the assessment in daily work. According to the assessment standard of central team construction, each team was assessed, and the team assessment form was revised again. The assessment content of the new team mainly includes six aspects: quality standardization, work tasks, labor attitude, maintenance quality, safety awareness and learning innovation. The monthly assessment score is linked to the monthly salary. A good team will be rewarded and a poor team will be punished. According to the actual situation, the labor discipline was strengthened mainly in view of the problems existing in the mechanical department this month. Strengthen on-site maintenance management and unswervingly adhere to the system of leading and following maintenance.

3. Implement integrated management system and NOSA

XX month comprehensive management system review results 3. Implement integrated management system and NOSA

Generally speaking, there are still some deficiencies in data and venues. In order to reverse this situation as soon as possible and improve the management level of the integrated management system of safety, environment and quality in our department, the leaders attached great importance to it and comprehensively rectified all the projects that did not meet the safety and environment standards in the workshop. At the end of XX, the basic rectification was completed. The warehouse, workshop and maintenance room of each team in the workshop were uniformly deployed on site, and unified planning was carried out according to the requirements of Anjian environmental quality integrated management system, and the rectification was gradually carried out. Thoroughly rectify the problems found by the safety supervision department and the problems found by self-inspection, as well as violations and hidden dangers, and don't let go of any dead ends.

4. Safety work: According to the instructions of the Central Document of XX, the machine safety work will be carried out in the second quarter.

The second hundred-day accident-free safety production activity in 20xx, focusing on electrical safety rectification and dust control, laid a good foundation for safety production throughout the year.

After the interns of Yulin Industrial School 10 are assigned to various factories, they should be the key groups of safety management, strictly implement the three-level safety training and education system, and at the same time, they must carry out 72-hour safety training, sign a master-apprentice safety guarantee agreement, go through the training filing and certification procedures at the safety supervision office, do a good job of third-level confirmation, and put an end to illegal acts such as single person, independent post or special type of work.

According to the accident-prone analysis and safety work priorities in the first quarter of the washing and processing center, targeted safety learning and accident reflection activities are conducted once a week for accident-prone personnel, and guardians are set up during the operation. At the same time, the on-site operation behavior of these personnel is randomly selected to crack down on violators. In combination with the unsafe behavior finding activities carried out in the fourth quarter, we will actively carry out self-examination and self-correction activities, find out at least three illegal behaviors or attempted accidents every month, conduct comprehensive and serious analysis, carry out criticism and self-criticism education, and put an end to accidents from the root.

In order to strengthen employees' safety awareness, the department often gives training and education to new employees, newly assigned college students and temporary workers at pre-class meetings, explaining the accident cases of washing centers over the years, analyzing the reasons, preventive measures and lessons we should learn from them. During on-site maintenance, the old masters earnestly fulfill their rights and obligations in the master-apprentice agreement, let them know the safety precautions in practice, learn how to protect themselves and improve their self-prevention ability.

Conscientiously implement fire safety and winter three prevention work. Fire fighting and anti-freezing in winter should be included in the important content of safety management, and the hidden dangers of three defenses in winter should be thoroughly investigated to ensure safe production in winter. The newly assigned college students, interns and temporary workers were tested for safety laws and regulations, and those who failed were retaken, which enhanced their safety awareness.

5. Training: According to the "20xx Training Plan" formulated by the department, our department will carry out training this month.

Combine theory with practice, and train basic skills and knowledge of CO2 shielded welding and locksmith. Because the center organized a technical competition this month, the department organized personnel to conduct targeted training for the contestants. The newly assigned college students explained the materials, drawings and iron-carbon balance diagram in detail. In order to better carry out the activities of creating a learning team and striving to be a knowledge-based employee, our department requires the team to study safety, business technology and other aspects in a planned, recorded and effective way, and strive to improve the overall quality of employees.

The next training work needs to be strengthened. According to the training plan and maintenance time, the training content should be implemented and the training should be carried out in strict accordance with the training plan. Everyone is required to bring pens and notebooks when explaining, and record some important contents before the class meeting. Everyone is required to highlight the key points, conform to the actual work of the department, pay attention to teaching methods, be targeted, and try to popularize some theoretical things so that everyone can learn and understand them easily.

In a word, we finished all the work in XX months, but also exposed many shortcomings. The awareness and attention of each team to the technical and professional training of employees needs to be strengthened. The team has problems in the risk assessment of overhaul projects, and lacks safety education for temporary workers and new employees on site. The next step is to strengthen the ideological quality construction and safety management of employees, especially for temporary workers and newly assigned college students, and further strengthen the safety education of employees and the study of technical and professional level.

Monthly work plan

20XX xx month work plan

1, under the unified command and leadership of the center, actively cooperated with the factory for the purpose of serving the factory, and completed the maintenance task in May *;

2, strengthen the inspection work, according to the actual situation as far as possible to each branch for inspection, to help each branch to find equipment hidden trouble in advance, to avoid accidents;

3. Continue to improve the integrated management system of safety, health, environment and quality, raise the contents of internal data collation and risk assessment to a new level, and apply the contents of the integrated management system of safety, health and environment to actual management, so as to really improve our management level;

4. Safety work: pay special attention to the safety work this month, reasonably arrange the off-duty of personnel, ensure the reasonable rest of the maintenance personnel who go out, and prevent an employee from getting tired. In order to ensure the personal safety of each employee, the monitor is responsible for the unified command and implementation during on-site maintenance, and the department leaders supervise the implementation, and other personnel pay attention to appropriate cooperation. Strengthen the management of new employees and temporary workers.

5. Do a good job in training, use the pre-shift meeting for half an hour to conduct training in all aspects, so that the new sub-personnel can familiarize themselves with the site and equipment as soon as possible, and train the basic knowledge of metal technology, hydraulic transmission and practical operation essentials as planned in May, hoping that employees can achieve good results; 6、

Because I focused on the screening machine some time ago, I didn't grasp the processing work of automatic winding machine. From May, the maintenance class should strengthen the handling and implementation of automatic winding machine when it is not out for maintenance;

7. According to the instructions of the central document, the second 100-day accident-free activity of safety production in 20XX with electromechanical safety rectification and dust control as the main contents was carried out in the second quarter, laying a good foundation for safety production throughout the year.