How to do the plaster line of home improvement?

Plaster line, when our home is decorated, is also a good decoration material. In terms of decoration, it is also very beautiful, which can meet our decoration needs. But when decorating the plaster line, we should also have a comprehensive understanding, which will help our house feel more comfortable. Let's introduce it to you, how to do the plaster line of home improvement? This will also help us decorate.

First, how to do the plaster line of home improvement?

1, plaster line decoration, plaster line mold selection and cleaning, these understandings, before this, it is very important to choose high-quality molds, plaster line how to make mold patterns should be clear, three-dimensional, smooth and flat. Carefully clean the mold with grease, and ensure that the inside of the mold of plaster line is clean, and carefully clean the inside of the fine seam of the pattern. If the plaster mold is severely deformed due to aging, it can be soaked in high-temperature water, which may cause permanent damage to the mold.

2, plaster line decoration, fixed plaster mold, we also need to be careful, to use a strong clamping force to close the mold, and pay attention to the preservation level of the glass table or marble table when closing the mold, otherwise the plaster line will lead to the finished product when demoulding, which is often said to be "wrong." Choose a suitable spoon to stir gypsum powder. The size of the spoon should be proportional to the width and thickness of the plaster line. The wider and thicker the lines are, the more gypsum powder is needed and the bigger the spoon is. Then sprinkle with gypsum powder.

3. For the decoration of gypsum line, it should be understood that the prepared gypsum slurry should be evenly put into the gypsum line mold by filling gypsum slurry until the gypsum slurry completely covers the front of the whole mold and the thickness reaches more than 5mm, then glass fiber or grid cloth is added, a strong string is added at one end, and then a layer of gypsum slurry is covered, and then it is scraped flat with a special mold scraper. It is emphasized here that the thickness must meet the standard, and it is not allowed to cut corners, because it is easy to break or deform when demoulding.

2. What are the types of plaster lines?

1, the types of plaster lines are. Fiber plaster line: The fiber plaster line takes gypsum as the main raw material. In order to meet our decoration needs, excessive fiber reinforced materials are added. The bending strength of this kind of board is higher than that of paper plastering line, which can be used for interior walls and partitions, and can also replace wood to make furniture.

2. The types of plastering lines are as follows. Paper plastering line: It is also very important that gypsum slurry is sandwiched in the middle of the paper plastering line, and both sides are protected by paper. Gypsum board is light in texture, high in strength, fireproof, moth-proof and easy to process. General paper plastering line is used for interior walls, partitions and ceilings. Fireproof and waterproof paper plastering line can be used for room walls with high humidity. Such as bathrooms, kitchens, bathhouses, etc. are lined with ceramic tiles and plastic brick walls.

3. The types of plastering lines are as follows. Gypsum hollow lath: Gypsum hollow lath takes gypsum as the main raw material and has good decorative effect. A hollow board made of excessive light fillers or fiber materials. This kind of board does not need paper and adhesive, and it does not need keel when it is installed. It is used for interior walls and partitions.

When the plaster line is decorated, everyone still needs to know in detail, which will also help us decorate beautifully.