Application of die-cutting machine

1, damping aluminum foil tape die-cutting products, electrical tape die-cutting products, foam tape sealant products.

2. Mirror seat structure adhesive tape die-cutting products

3. Die-cutting products of sound-absorbing materials for special parts

4. Die-cutting products of LCD, VCD and DVD for in-car displays, die-cutting products of transfer tape for in-car parts, and die-cutting products of tape for various interior parts.

5. Die-cutting products used to protect cushioning materials, and die-cutting products used for materials such as roof structure sealant tape.

Installed products: double-sided adhesive tape, foam tape, transfer tape, plasticizer-resistant bistable tape, which can reduce fog and can be used in automobile parts after cutting. Such as dashboard, lampshade, decorations, etc. The actual installation is faster, simpler and more accurate.

Noise reduction and shock absorption: die-cutting products made of foam, blankets and scratch-resistant textiles are pasted between metal parts and plastic parts, and between plastic parts and metal parts to reduce noise and shock absorption.

Interior decoration and cushioning: all kinds of neoprene, foam and silicone materials are used for decorative parts, doors and ceilings after precision die cutting.

Other applications: car logo installation, high temperature resistant spray masking paper, airbag sealing, speaker cover, temporary protective gasket, etc. A. Fixation of rubber parts

B. Protection of printed circuit boards

C. flash memory card

D, fixing the liquid crystal display cushion.

E. Fastening of buttons and hard materials

F. Fix the rearview mirror cover

G. fixation of flash battery/buffer pad

H. Fixing the reflective mold

I. Fixation of the battery panel

Fixation of J.J.LCD module

1. nameplate

2.FPCB

3. The 3.LCD module is fixed.

4.FPCB gaze

5.FPCB gaze

6. Fix the battery panel

7. Serial number label

8. earphone/microphone dust pad

9. Lens pad

10.FPCB repaired an LCD gasket.

B. Reject the adhesive sheet of the panel

C. light guide plate reflector

D. Backlight plate reflector

E. shading sheet

F. Optical diaphragm

G. lamp reflector

H. flexible printed circuit board adhesive sheet

I. Adhesive sheet of bottom frame 1. Panel interlayer

● No pollution

● Prevent loosening.

● Prevent impact noise.

● Prevent adhesion.

2. About 2. Light Emitting Diode(LED)

● Prevent light leakage.

● Absorb impact

● Improve air tightness.

3. About at the bottom of 3. Printed circuit board

● Absorb impact

● Absorb vibration.

● Fill in the blanks.

● Thermal insulation effect

4. Keyboard gasket

● Rebound

● No pollution

Good dimensional stability.

5. Around the battery

● No pollution

● Absorb the impact sound.

● Improve air tightness.

foot pad

Low friction.

● No pollution

Good dimensional stability.

7. Disk drive rear gasket

● Absorb vibration.

● Prevent impact noise.

● Improve air tightness.

8. Friction washer

Low friction.

● No pollution

Good dimensional stability.

9. Disc cover pad

● Absorb vibration.

● Interrupt motor noise.

● Dust prevention

● Improve air tightness.

10. Horn circumference

● Prevent noise.

● Fill in the blanks.

11.Around LCD

● Dust prevention

● Absorb impact

● Fill in the blanks.

● Improve shading A. Window/lens protection

B. Window/lens fixing

C. nameplate

D. serial number label

E. O-ring fixing of earphone/microphone

F. earphone/microphone dust screen

G. Window dust pad

H.LCD reflective film/backlight

First, the LCD frame is fixed

J. Battery box fixing

1. Fixed keyboard

2. Microphone dust screen

3. Microphone dust pad

4. Metal wire fixation method

5. Battery pad

6. Receiver/microphone pad

7. earphone/microphone dust pad

8.PCB fixing

9. Panel label die-cutting machine is mainly used for die-cutting, indentation and cold stamping of trademarks, cartons and greeting cards in paper packaging and decoration industry, and is an important equipment for post-press packaging and molding.

According to the different stamping forms, die-cutting machines are mainly divided into three types: round press, round press and flat press. According to the form of template placement, it can be divided into vertical and horizontal. It is divided into manual (semi-automatic) and automatic according to the degree of automation. Functionally, in addition to die cutting, there are also hot stamping functions, called hot stamping die cutting machines, and some with automatic waste removal functions, called waste removal die cutting machines. Rotary die-cutting machine is characterized by line contact, low die-cutting pressure and high production efficiency. It can be connected with printing equipment such as offset press, flexo press and gravure press for on-line die cutting, and has a wide application range.