What is electrostatic tape?

Anti-static adhesive tape is generally mainly used for the outer packaging of anti-static products such as circuit boards, notebook computers, mobile phone communication, clean rooms, etc. It is that the surface of OPP film is coated with pressure-sensitive adhesive water with antistatic agent. After antistatic treatment, the whole roll is light yellow, but it is completely transparent after being pulled open.

Electrostatic tape is divided into electrostatic film and antistatic tape, which is antistatic as the name suggests. Electrostatic film is a kind of protective film that is self-adhered by static electricity. PVC electrical tape is made of soft PVC film and coated with rubber pressure sensitive adhesive. It has good insulation, fire resistance, pressure resistance and cold resistance, and is suitable for automobile wiring, winding and insulation protection.

Note: 1. When cleaning the adhesive tape, you can clean it with an eraser or directly on the adhesive tape. The effect is very obvious, but it is only suitable for small traces.

2. Wash with a wet towel. This method is more suitable for transparent adhesive traces. Wet the footprints with a wet towel and then wipe them slowly. This method is suitable for places that are not afraid of sticking.

3. You can wipe it with alcohol. When using this method, you must first ensure that the wiped area is not afraid of fading, and then wipe it with a rag dipped in alcohol until the offset printing is erased.

4. You can use detergent to clean offset printing, and directly use a rag dipped in detergent to clean it. After cleaning, rinse with clear water.

5. Because nail polish remover contains chemicals, it can also be used to clean the traces of adhesive tape with La Liga remover, and the effect is very good.

6. If the traces of the tape are black, you can coat it with white oil, then wipe it with a rag and rinse it with water. If there is no white oil, you can wipe it repeatedly with wind oil essence to clean up the traces of black tape.

7. If the tape trace is relatively small, you can directly wipe it with an eraser. If the traces of the tape are large, you can apply industrial alcohol on it and then wipe it with a cloth.